Best Coil Inductors

MartinLogan ElectroMotion ESL Electrostatic Floorstanding Loudspeaker - Each (Gloss Black)

  • High frequency transducer: XStat CLS electrostatic transducer.
  • Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
  • MicroPerf panel is housed within a radical aluminum and composite AirFrame.
  • 129 square inches of sound radiating surface on both the front and back.
  • Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 42 - 22,000 Hz ±3 dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-300 watts per channel.
  • Dimensions: 52.1" high, 9" wide, 16.3" deep.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Matte White (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

MartinLogan Motion SLM X3 Ultra-Slim 3-Channel Passive Soundbar - Black

  • L-C-R soundbar, Slim design, Binding Posts: Push style.
  • High Frequency Driver: Three 1" x 1.4" Folded Motion Transducers with 5.25" x 1.75" diaphragm.
  • Low Frequency Drivers: Six 4" paper cone, sealed cabinet.
  • Components: Custom air core coil inductors, polyester film capacitors in series and low DF electrolytic capacitors in parallel, overall system thermal/current protection.
  • Frequency Response: 120–23,000 Hz ± 3 dB.
  • Dispersion: 80° x 80°, Sensitivity: 93 dB @ 2.83 volts/ meter.
  • Impedance: 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers..
  • Crossover Frequency: 3,000 Hz (2-way design), Recommended Amplifier Power: 20–140 watts.
  • Dimensions with wall bracket (HxWxD): 6.3" x 48" x 2".
Check Stock

Martin Logan - ElectroMotion ESL - Hybrid Electrostatic - Each - Black

  • High frequency transducer: XStat CLS electrostatic transducer.
  • Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
  • MicroPerf panel is housed within a radical aluminum and composite AirFrame.
  • Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Recommended amplifier power: 20-300 watts per channel, Crossover frequency: 500 Hz.
  • Convenient push-style speaker terminals for bare wires, pins, or bananas, Sturdy, 1/4-20 ETC spikes.
  • Frequency response: 42 - 22,000 Hz ±3 dB, Dispersion: 30-degrees x 34" line source, Sensitivity: 91 dB/2.83 volts/meter.
  • Nominal Impedance: 6 Ohms, 1.6 @ 20 kHz, compatible with 4, 6, or 8 ohm rated amplifiers.
  • Weight: 35.5 lbs. each, Dimensions: 52.1" high, 9" wide, 16.3" deep.
Check Stock

MartinLogan ElectroMotion ESL X Floor-Standing Speaker Each (Satin Black)

  • High-frequency transducer: XStat CLS electrostaic transducer.
  • Panel dimensions: 40" x 8.6" (102cm x 22cm), Radiating area: 344 in2.
  • Low-frequency driver: Two 8” (20.3 cm) high excursion, high-rigidity paper cones with extended throw driver assembly, non-resonance asymmetrical chamber format, bass reflex.
  • Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 41–22,000 Hz ±3dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-400 watts per channel.
  • Dimensions: 59.2 x 9.4 x 20.7 (150.3cm x 23.8cm x 52.6cm), Weight: 52lbs. (23.6kg) each.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
  • Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
  • Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
  • Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
  • Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check Stock

Elesunory 24 Values 240 Pcs Inductors Set I-Shaped Inductor 2.2uH to 100mH Cylindrical Plug-in Inductor Assortment Kit (Black)

  • 【Various Specifications】This inductor set has 240 traditional through-hole inductors, classified in 24 small transparent envelopes, each with 10 values. The rich and diverse product specifications perfect to work in your circuit work..
  • 【High Quality】Made of high-quality professional guide pins, stable performance, not easy to open circuit phenomenon, large current resistance, high self resonant frequency. The choice of values is perfect for filter design in power switching or audio applications..
  • 【Easy to Use】We distribute the inductors in plastic storage boxes (a single-compartment box that snaps closed), and stick a clear label on the surface of the box to provide users with the type of inductors they need, which is convenient and fast to use..
  • 【High Quality】 The plug-in I-shaped inductor uses fine materials, meticulous craftsmanship, compression and corrosion resistance, durable and practical, low energy consumption, stable performance, and each value is produced under strict standards, allowing you to get a perfect product..
  • 【Quality Service】This inductors assortment kit is of good quality. In order to optimize your shopping experience, we provide a 180-day free replacement service. If you have any questions about our products, pl....
Check Stock

Maxmartt 0.1Mm Copper Wire,Magnet Wire 0.1mm Copper Wire,Enameled Wire 0.1mm, 5pcs Winding Magnet Copper Solder Wire Length 15m

  • metal copper wire【Quality products】Enameled wire is a kind of copper wire coated with a very thin insulation layer, made of high conductivity copper, please rest assured to buy..
  • fine copper wire【Wide range of applications】It is used in transformers, inductors, motors, speakers, hard disk head actuators, electromagnets, and other applications requiring tight coil insulation..
  • 0.1mm copper wire【Electronic product repair】Also can be used for professional maintenance of mobile phones, computers, laptops and other precision motherboards..
  • laquered copper wire【Easy to operate】When you weld, do not need to scrape the isolation layer, direct welding, more convenient and time saving..
  • copper wire enameled【Sufficient product】The package contains five wires, each about 15 meters long, enough to last a long time for a home or store..
Check Stock