Best Cobalt Sulphate

Drill Hulk 13-Piece M35 Cobalt Drill Bit Set for Hard Metal, Stainless Steel, 1/16-Inch to 1/4-Inch, Jobber Length, 3-Flat Shank

  • JOBBER LENGTH: jobber length cobalt drill bit, 135 degree split point reduces drill walking, 3-flat shank provides a secrue grip in chucks.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 13 pieces cobalt drill bits in inch sizes 1/16" to 1/4" (1/64" increments) with plastic case.
Check Stock

Cobalt Drill Bit Set M35 High Speed Steel Twist Drill Bit Set for Hardened Metal Stainless Steel Cast Iron Woodwork Plastic (30 Pieces,1/8 Inch)

  • Quality material: the cobalt drill bit set uses cobalt M35 high speed steel as material, this material is reliable and practical, with a long service use, heat and abrasion resistance.
  • The cutting edge of drill bit is hardened and honed, with accurate cutting without shaking.
  • Creative twist design: metal cobalt drills for hardened steel has 135 degrees split point tip and torsional design to improve cutting speed with self-centering ability.
  • They can avoid walking during work process, while clearing chips and particles more quickly and easily.
  • Nice features: the nice twist drill bits have precise diameter.
  • M35 cobalt drill bits for hardened metal are not easy to break or wear out, so suitable for lithium electric drill, hand electric drill, impact electric drill, etc..
  • The size is small, please pay attention to use.
  • Various fitness: M35 high speed steel cobalt drill set is nicely suitable for hardened material and hard metals, such as cast iron, high temperature alloy, hard plastics, stainless steel, titanium alloy, woods, etc., also for soft materials.
  • What you will get: the package contains many cobalt drill bits, sufficient quantity to meet your various needs.
  • Please pay attention to speed, pressure and heat control during drilling.
Check Stock

Cobalt Drill Bit Set M35 High Speed Steel Twist Drill Bit Set for Hardened Metal Stainless Steel Cast Iron Woodwork Plastic (15 Pieces,1/16 Inch)

  • Quality material: the cobalt drill bit set uses cobalt M35 high speed steel as material, this material is durable, strong and practical, with a long service life, heat and abrasion resistance.
  • The cutting edge of drill bit is hardened and honed, with accurate cutting without shaking.
  • Creative twist design: metal cobalt drills for hardened steel has 135° split point tip and torsional design to improve cutting speed with self-centering ability.
  • They can avoid walking during work process, while clearing chips and particles more quickly and easily.
  • Nice features: the 1/16 inch twist drill bits have precise diameter.
  • M35 cobalt drill bits for hardened metal are not easy to break or wear out, so suitable for lithium electric drill, hand electric drill, impact electric drill, etc..
  • The size is small, please pay attention to use.
  • Various fitness: M35 high speed steel cobalt drill set is greatly suitable for hardened material and hard metals, such as cast iron, high temperature alloy, hard plastics, stainless steel, titanium alloy, woods, etc., also for soft materials.
  • What you will get: the package contains 15 pieces 1/16 inch cobalt drill bits, sufficient quantity to meet your various needs.
  • Please pay attention to speed, pressure and heat control during drill....
Check Stock

STROTON Cobalt Drill Bit Set (1/16-1/4 Inch, 13PCS), M35 High Speed Steel Twist Drill Bits for Stainless Steel, Hard Metal, Cast Iron, Plastic and Wood

  • 【Premium True 5% Cobalt Steel with 68 HRC】- The Marked Cobalt Content of Ordinary Drill Bits May be False, but This Drill Bits Set is Made of Cobalt Ore from Our Own Mine, Which Indeed Contains 5% Cobalt. Although the Cost and Price are Slightly Higher, It Usually is able to Provide 3X Heat,Wear and Chip Resistance and 3X Tool Life..
  • 【Split Point Design and Fully Ground Process】- Compared with Other Ordinary Drill Bits, This Drill Bits Set is Particularly Suitable for Heavy Duty Work, Such as Cutting through Stainless Steel,Steel Plate,Iron Sheet, Cast Iron and Hardwood, and Drilling Out Bolts Studs and Screws..
  • 【3X Efficiency + 3X Tool Life】- This Cobalt High Speed Steel Drill Bits Set is Typically Capable of Running 3 Times Faster. Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes..
  • 【Sharp Drill Bit Edge】- This Kind of Drill Bits Beast Can Even Cut Hardened Metal into Long Iron Bars, While a Dull Drill Bit Can Just Slowly Wear Through Metal..
  • 【13 Pieces Jobber Length Industrial Drill Bits Includes】:1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4 [DIA 1/64 Inch Increments].
Check Stock

TEMO M35 Cobalt Spiral Flute Type Step Drill, 9 Size from 1/4 Inch To 3/4 Inch, 3/8 Inch Shank

  • TEMO M35 Cobalt Spiral Flute Type Step Drill, 9 Size from 1/4 Inch (6.4 mm) To 3/4 Inch (19 mm), 3/8 Inch (9.5mm) Shank.
  • 9 hole sizes: 1/4″ (6.35mm), 5/16″ (7.94mm), 3/8″ (9.52mm), 7/16″ (11.11mm), 1/2″ (12.7mm), 9/16″ (14.29mm), 5/8″ (15.88mm), 11/16″ (17.46mm), 3/4″ (19.05mm), with 1/16″ (1.59mm) increments. 3/8 Inch Shank with 3 flats to eliminate slipping.
  • Double spiral flutes for more efficient swarf clearance.
  • 1/4 Inch hex Shank with quick release slot to eliminate slipping.
  • Self-starting for clean holes in thin materials.
  • M35 cobalt HSS to cut stainless steel. The step drill bit is made with M35 cobalt. It is ideal for variety of materials from stainless steel, metal, plastic, fiberglass to wood. They also help to enlarge existing holes. M35 HSSCo is a high speed steel alloy made up of 5% cobalt. M35 is similar to M2, but with 5% cobalt added..
  • The addition of cobalt increases heat resistance. It is widely used in metal manufacturing because of its ability to resist wear over conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M35 is also less prone to chipping when used for interrupted cuts..
Check Stock

MOSTPLUS Front Complete Strut Spring Coil Springs Shock Absorber Compatible for 2005-2010 Chevrolet Cobalt 172179R 172179L(Set of 2)

  • Compatible for 2005 Chevrolet Cobalt BASE MODEL-LS-L, Compatible for 2010 Chevrolet Cobalt BASE MODEL-LS-LT-LT TEAM CANADA, Compatible for 2009 Chevrolet Cobalt LS-LT, Compatible for 2006-2007 Chevrolet Cobalt LS-LT-LTZ (Detailed Application Below).
  • Replace Complete Strut Assembly NO#: 172179R 172179L.
  • Includes 1 pairs of Front Complete Strut Assembly which Equipted with Strut, Soil, Spring and Mounts.
  • Guaranteed Exact Fit for easy installation.
  • Please check your car information before purchase..
Check Stock

TEMO M35 Cobalt Spiral Flute Step Drill 12 Size From 3/16 Inch To 7/8 Inch 1/4 Inch Hex Shank

  • M35 cobalt step drill 1/4" (6.35mm) hex shank 12 hole 3/16" (4.76mm) to 7/8" (22.22mm).
  • 12 hole sizes: 3/16" (4.76mm), 1/4" (6.35mm), 5/16" (7.94mm), 3/8" (9.52mm), 7/16" (11.11mm), 1/2" (12.7mm), 9/16" (14.29mm), 5/8" (15.88mm), 11/16" (17.46mm) , 3/4" (19.05mm), 13/16" (4.76mm), 7/8" (22.22mm) with 1/16" (1.59mm) increments. The size marks are stamped next to each step to ease the use..
  • double spiral flutes for more efficient swarf clearance.
  • 1/4 Inch hex Shank with quick release slot to eliminate slipping.
  • Self-starting for clean holes in thin materials.
  • M35 cobalt HSS to cut stainless steel. The step drill bit is made with M35 cobalt. It is ideal for variety of materials from stainless steel, metal, plastic, fiberglass to wood. They also help to enlarge existing holes. M35 HSSCo is a high speed steel alloy made up of 5% cobalt. M35 is similar to M2, but with 5% cobalt added..
  • The addition of cobalt increases heat resistance. It is widely used in metal manufacturing because of its ability to resist wear over conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M35 is also less prone to chipping when used for interrupted cuts..
Check Stock

5mm Cobalt Drill Bit Set, M35 Twist HSS Drill Bits Straight Shank, 5mm High Speed Steel Drill Bits for Drilling in Hard Metal, Stainless Steel, Cast Iron

  • 【10PCS 5mm Cobalt Drill Bits】10pcs -(Dia 5mm) x (Length 86mm) metal drill bits. This drill fits most power drills on the market today and comes with a portable plastic case for easy storage and organization..
  • 【M35 Cobalt High Speed ​​Steel】Made of M35 Cobalt Steel, Cobalt is added to form a hardened alloy, measuring Rockwell hardness up to 67, faster cutting speed, longer service life, up to twelve times more drill bits compared to ordinary high speed steel. HSS bit set, harder than the 4241 HSS used in other similar bit sets. These bits also contain 5% cobalt for improved wear resistance and durability..
  • 【Full Grinding Process and 135° Split Point】Fully ground helical flute design removes particles quickly, reducing friction and heat for faster, cooler drilling performance. The 135° straight shank split point prevents walking, making drilling more precise and faster..
  • 【PROFESSIONAL AND WIDELY USED】M35 Cobalt High Speed Steel is more suitable for hardening materials. Ideal for cutting stainless steel, steel and cast iron as well as wood, aluminum alloys and other metals. Not suitable for glass or ceramic materials. Pay attention to speed, pressure and heat control when drilling..
  • 【Quality Service】If you have any questions about ....
Check Stock

3/32-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 3/32-inch cutting diameter, 1-1/4-inch flute length, 2-1/4-inch overall length, 118 degree point, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 3/32-inch cobalt drill bits with case.
Check Stock