Best Cobalt Pilot Counterbore

uxcell Knurled Insert Nuts, M8 x 10mm(L) x 10mm(OD) Female Thread Brass Embedment Assortment Kit, 5 Pcs

[SIZE] - M8x1.25mm thread size, 0.39" (10mm) long, 0.39" 10mm outer diameter ,OD tolerance: +0.02"/0"..
[MATERIAL] - Made of brass, rust resistance, good thermal conductivity and heat resistance, can ensure long time using..
[FEATURE] - Can be installed by ultrasonic or heat into thread tapered hole, or in during injection..
[ADVANTAGE] - No need to counterbore or countersink the boss hole since the insert has guide pilot..
[APPLICATION] - Widely used on injection for fastening..

Check Stock

1/8 Inch Cobalt Drill Bits(10Pcs), HPHOPE M35 HSS Metal Twist Drill Bits Set, Jobber Drill Bits Length and Straight Shank, Suitable for Drilling in Hard Metal, Stainless Steel, Cast Iron

【M35 COBALT HIGH SPEED STEEL】1/8" drill bits for metal made from M35 Cobalt High Speed Steel and contain 5% Cobalt, which increases wear-resistance, durability and extra longer life span, so that the drill bits last through multiple uses.
【135° SPLIT POINT】135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. Straight shank of this cobalt steel drill bit allows for firmly holding and accurate centering and makes drilling precise and faster.
【FULLY GROUND PROCESS】Fully ground spiral groove design clears particles quickly, decreases friction and heat for faster drilling performance.
【PROFESSIONAL & WIDELY USE】Jobber drill bits perfectly Suitable for drilling holes as Stainless Steel, Copper, Cast Iron, Galvanized Pipe, Aluminum Alloy, Wood and Other Softer Metals. Not for Glass or Ceramic Materials.
【EASY USE & STORAGE】This metal twist drill bits set includes 10pcs 1/8" Cobalt Drill Bits, This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and DIY, household maintenance and repair.

Check Stock

Drill America DEWCBR Series Qualtech High-Speed Steel Counterbore, 1/2\ Shank Diameter, 3/16\ Pilot, 5-1/8\ Length, 5/8\ Size (Pack of 1)

High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Round shanks allow use with a wide variety of toolholding systems.
Counterboring is the enlargement of a portion of a hole that has previously been formed.
The counterbor is a two-piece construction, having an integral shank and counterbore-cutter, and a pilot that is interchangeable, which provides flexibility in the use of the tool.

Check Stock

Chicago-Latrobe 550 115 Piece Heavy-Duty Cobalt Steel Jobber Length Drill Bit Set, Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle

Manufactured to NAS 907 Type J geometry aerospace specifications with self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging and gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
performance is similar to uncoated tools.
Heavy duty construction for increased strength and rigidity compared to standard drill bits.
Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.

Check Stock

Bosch HSBIM9 General-Purpose 9 pc. Bi-Metal Hole Saw Kit

All-in-one kit – features two SpinLOCK Universal arbors, steel pilot bit and six hole saws with Progressor tooth design.
SpinLOCK universal arbor – fits all brands and sizes to simplify diameter changes with fast plug removal and tool-free install.
The pilot bit – designed to start holes in a variety of materials.
Progressor tooth design – hole saws feature alternating teeth size for performance, cutting faster and lasting longer in wood, metal and plastic materials.
Durable hole saw material – hole saws are made with 8% cobalt alloy.

Check Stock

Century Drill & Tool 26529 Pro Grade Cobalt Drill Set, 29 Piece, Made in The USA, for Stainless Steel and Hard Metal

Set includes 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64" and 1/2" cobalt drill bits.
Century Pro Grade drills are made from 5% industrial quality M35 cobalt alloy high speed steel..
Cobalt is extremely heat resistant, when used and operated in power units that have a RPM speed of 1,500 or more for maximum efficiency..
Lasts up to 12 times longer than the average consumer-grade high speed steel drill..
135 degree quick-cut point penetrates faster and will not walk or wander at the starting surface. Does not require a center punch or pilot hole..

Check Stock

3/8 Inch Cobalt Drill Bits(5Pcs), HPHOPE M35 HSS Metal Twist Drill Bits Set, Jobber Drill Bits Length and Straight Shank, Suitable for Drilling in Hard Metal, Stainless Steel, Cast Iron

M35 COBALT HIGH SPEED STEEL: 3/8" drill bits for metal made from M35 Cobalt High Speed Steel and contain 5% Cobalt, which increases wear-resistance, durability and extra longer life span, so that the drill bits last through multiple uses..
135° SPLIT POINT: 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. Straight shank allows for firmly holding and accurate centering and makes drilling precise and faster..
FULLY GROUND PROCESS: Fully ground spiral groove design clears particles quickly, decreases friction and heat for faster drilling performance..
PROFESSIONAL & WIDELY USE: Perfectly Suitable for drilling holes as Stainless Steel, Copper, Cast Iron, Galvanized Pipe, Aluminum Alloy, Wood and Other Softer Metals. Not for Glass or Ceramic Materials..
EASY USE & STORAGE: The set includes 5Pcs 3/8" Cobalt Drill Bits, This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and DIY, household maintenance and repair..

Check Stock

Hymnorq 3/8 Inch Fractional Size M35 Cobalt Steel Twist Drill Bit Set of 5pcs, Jobber Length and Straight Shank, Extremely Heat Resistant, Perfect Drilling in Stainless Steel and Cast Iron

COBALT STEEL - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, ideal for repeated drilling in metalworking..
FOR METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
SELF CENTERING - The 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks..
5PC SET - The set includes 5pcs of 3/8” diameter M35 grade cobalt steel twist drill bits, packed in a convinient and reuseable PVC case for easy storage and carrying. Manufactured to German DIN338 standard..
DOWNLOADABLE USER GUIDE - We've summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers w....

Check Stock

Chicago Latrobe 790 Solid Carbide Spotting Drill Bit Regular Length Uncoated Bright Finish Round Shank Right-Hand Spiral Flute 120 Degree Conventional Point 1/4 Size

Spotting drill bit creates a pilot hole to reduce walking and improve hole accuracy.
Solid carbide drills produce close-tolerance holes in hard materials, and have a longer tool life at higher speeds than cobalt and high-speed steel (HSS).
Uncoated (bright) finish has no additional surface treatment or coating.
120-degree conventional point drills a pilot hole to accurately guide a 118-degree secondary drill bit.
Round shank accommodates most drill chucks.

Check Stock