Best Co2 Laser Surgery

Monport 40w Lightburn with GCode License Key for Lightburn Software 40W Laser Engraver (8" X 12") CO2 Laser Engraver with Red Dot Guidance, 3 LED Monitor Display and Water Cooling System

  • : This CO2 laser engraver accessory kit by OMTech includes 20 durable aluminum blades to let you make your own laser bed that provides lasting, firm, and secure support for your engravings.
  • : Easy to set up and take down, this 14.4 inch knife laser working table works perfectly with OMTech's CO2 laser engraving machines with a working area of 12x20 inches (300x500 mm).
  • : Our knife workbed blades can be set densely or sparsely as needed to ensure debris of various sizes easily passes through, fitting almost any projects while keeping your worksite clean.
  • - : This set of 20 laser bed blades offers unraveled toughness and corrosion resistance under even punishing use thanks to the high-strength solid aluminum construction.
  • : Each blade is specially shaped into a prism to stay firmly secured to your machine while using its sharp edge to minimize the contact area with your materials for ideal engraving results.
Check Stock

Grow Crew Hydroponic CO2 Enrichment Kit | Includes 20 lb Aluminum CO2 Tank, Carbon Accelerator C02 Regulator, Atlas 7 CO2 PPM Monitor and Active Air Rain System to Shower Your Plants with CO2

  • ...k (Empty), Carbon Accelerator CO2 Regulator w/ Flow Meter, Atlas 7 CO2 Monitor, Active Air CO2 Rain System - 20 ft, 6 eye-screws,1 T-Fitting, and a "Legalize Tomatoes" Sticker.
  • ✓ PERFECT CO2 ENRICHMENT KIT - The C02 Rain System showers your plants with CO2! Just affix the eye screws in the ceiling, slide the black laser drilled tubing through the eye screws, attach the plastic tubing from your CO2 Regulator and you've got CO2 raining down on your plants!.
  • ✓ CARBON ACCELERATOR REGULATOR W/ FLOW METER - The CO2 Release Kit provides you with the tools you need for proper CO2 enrichment. The regulator assembly features an industrial-grade 120-volt solenoid valve with 6 ft. power cord, a precise flow-gauge, and easy-to-read pressure gauge. The kit also includes 10 ft of tubing for dispersal, and connects directly to 20 lb. or 50 lb. tanks..
  • ✓ TITAN CONTROLS ATLAS 7 CO2 PPM MONITOR - Select CO2 PPM levels at 1000 PPM, 1250 PPM or 1500 PPM. Integrated photocell. Built-in calibration feature. Single button control. Enclosure resists dust, rust, and moisture. 5 Amps maximum/120 Volts/60 Hz..
  • ✓ 20 LB. ALUMINUM CO2 TANK - The 20 pound aluminum tank is brand new, and perfect for use with our CO2 regulator. Aluminum tanks are about 1/2 the weight of standard ....
Check Stock

OMTech Knife Laser Bed, Aluminum Laser Working Table for 12"x20" CO2 Laser Engravers Markers, Set of 20 Knife Blades for Laser Engraving Marking Etching Machines, Laser Work Platform DIY Accessory Kit

  • : This CO2 laser engraver accessory kit by OMTech includes 20 durable aluminum blades to let you make your own laser bed that provides lasting, firm, and secure support for your engravings.
  • : Easy to set up and take down, this 14.4 inch knife laser working table works perfectly with OMTech's CO2 laser engraving machines with a working area of 12x20 inches (300x500 mm).
  • : Our knife workbed blades can be set densely or sparsely as needed to ensure debris of various sizes easily passes through, fitting almost any projects while keeping your worksite clean.
  • - : This set of 20 laser bed blades offers unraveled toughness and corrosion resistance under even punishing use thanks to the high-strength solid aluminum construction.
  • : Each blade is specially shaped into a prism to stay firmly secured to your machine while using its sharp edge to minimize the contact area with your materials for ideal engraving results.
Check Stock

OMTech Knife Laser Bed, Aluminum Laser Working Table for 24"x35" CO2 Laser Engravers Cutters, Set of 30 Knife Blades for Laser Engraving Marking Etching Machines, Laser Work Platform DIY Accessory Kit

  • : This CO2 laser engraver accessory kit by OMTech includes 30 durable aluminum blades to let you make your own laser bed that provides lasting, firm, and secure support for your engravings.
  • : Easy to set up and take down, this 27.4 inch knife laser working table works perfectly with OMTech's CO2 laser engraving machines with a working area of 24x35 inches (600x900 mm).
  • : Our knife workbed blades can be set densely or sparsely as needed to ensure debris of various sizes easily passes through, fitting almost any projects while keeping your worksite clean.
  • - : This set of 30 laser bed blades offers unraveled toughness and corrosion resistance under even punishing use thanks to the high-strength solid aluminum construction.
  • : Each blade is specially shaped into a prism to stay firmly secured to your machine while using its sharp edge to minimize the contact area with your materials for ideal engraving results.
Check Stock

ATOMSTACK Honeycomb Working Table F1 for Laser Engraving and Cutting Machine, Honeycomb Working Panel for Fast Heat Dissipation and Desktop-Protecting, Compatible with All Laser Cutter,380x284x22mm

  • Double Protection Desktop: ATOMSTACK honeycomb board adopts scientific and reasonable honeycomb height size design to prevent laser burning workbench or desktop. At the same time, it is equipped with anti-cutting metal protective backing board, which can further protect the desktop from laser damage. It is very suitable for various styles. CO2 or diode laser engraving machine..
  • Anti-slip metal clamps for fixing:This laser cutting honeycomb table is all made of metal, high-precision CNC processing, and it has fixture design, suitable for fixing various sizes of carvings, preventing the objects from shifting to the exact position during the carving process, and preventing the carvings from deforming..
  • Fast heat dissipation:The size of the honeycomb laser bed is scientifically calculated, which can make the carving object get fast heat dissipation during the carving process, and the cutting edge is more refined, while avoiding the burning of the carving object due to excessive temperature..
  • Cutting Through Observable Design: When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb table will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to ....
Check Stock

OMTech 50W CO2 Laser Engraver and Rotary Axis 50W Laser Cutter and Engraver Machine 12x20 Inch Laser Engraving Machine with 2 Way Pass Air Assist RDWorks Laser Cutting Machine for Wood Acrylic More

  • COMMERCIAL CO2 LASER: Whether professional engraver or inspired DIYer, this 50W laser engraver and cutter from OMTech will allow you to bring your....
  • 12x20 BED & ROTARY AXIS: The spacious 12x20 inch workbed provides 1.6 square feet of room to fit almost any project and two-way 25"x1.4" pass-through....
  • FAST & QUICKLY ADJUSTABLE: This CO2 laser system marks wood, paper, plastics, leather, fabric, stone, and a wide range of other nonmetallic materials....
  • SAFE & EASY OPERATION: A digital laser power supply provides sure and easily monitored operation for your DC tube's expected 2000 hour life.
  • SUPERIOR SUPPORT & SERVICE: From garage artists to backyard businesses to professional workshops, the OMTech community continues to grow thanks to our....
Check Stock

Laser Safety Glasses for Co2/Eximer - Model OTG

  • EN207: 1998 + A1EN207: 1998 + A1: 2002 approved (European laser eyewear standards for laser safety eyewear)..
Check Stock

American Photonics Printer Head Lens, 100% made in the USA

  • Printer Head Lens - Suitable to be use with Glowforge Pro(R), Glowforge Plus(R) and Glowforge Basic (R).
  • Focal Length: 50.8mm (2.0") - Only lens Available for Glowforge laser systems.
Check Stock

Smith & Wesson M&P 40 .177 Caliber BB Gun Air Pistol, Black, Standard Action

  • Shoots .177 caliber steel BBs at up to 410 FPS.
  • Features a manual safety, 19-shot drop-free mag, and fiber optic sights.
  • An integrated accessory rail makes adding a tactical light or laser easy.
  • Powered by a single 12-gram CO2 cartridge housed in the grip.
  • Great for training as well as backyard plinking.
  • A replica of one of the newest S&W designs.
  • A BB repeater powered by CO2 housed in the grip.
  • This product is restricted from shipment into the state of New York.
Check Stock