Best Cnc Engraver Milling Router

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..

Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..

Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters for Mills Machines

UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
The router bit suit for CNC router and any plunge routers with 1/4" collet..

Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Shank Slab Flattening Router Bit Carbide Planer Router Bits Wood Milling Cutter Planing Tool Woodworking Tools by BINSTAK

4 WINGS WOOD CNC ROUTER BIT: Shank: 1/2".
HIGH QUALITY CNC ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time..
VERSATILE WOODWORKING TOOl: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
USE RANGE: Suitable for woods, mdf, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
GIFT: Router Collet Reduction Sleeve Tool Bit. For turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Inner diameter: 6.35 MM. Outside diameter: 12.7 MM.

Check Stock

Genmitsu CNC Router Bits 1/4 inch Shank Straight Router Bits Nano Blue Coat 2-Flute End Mill Cutter for Wood MDF PVC Acrylic, 5 PCS, SR05A

High Quality: Made of tungsten steel that's great for milling and cutting performance, ensure your work efficiency. The Nano Blue Coating with high hardness and heat resistance is durable and not easy to break..
Efficient Cuts: The 2-Flute Straight Router Bits have a mirror polish and large chip space which produces smooth cutting and fast chip-removal..
Shank diameter: 1/4''(6.35mm), cutting diameter: 1/4'' (6.35mm), cutting length: 25mm, overall length: 55mm, comes with 5pcs 1/4 shank 2-Flute Straight Router Bits..
Applicable Materials: Suitable for MDF, PVC, Acrylic, wood, solid wood, chipboard, plywood, organic board, core board, etc. Widely used for cutting/ engraving/ carving/ grooving/ slotting/ drilling/ hollowing/ positioning/ roughing / milling..
Wide Compatibility: Genmitsu SR05A 2-Flute Straight Router Bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..

Check Stock

HQMaster Combination Kit Set Router Bits Cutter Cutting Milling Tool (4 Type, Each 10Pcs) Including Flat/Ball Bits, 10 V-Shape Engraving Bits

Cost-effective bits: package include 4 type bits each 10pcs assorted in 4 storage cases meet most standard milling applications).
Perfect cutting: The design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal. made of quality ultral fine tungsten carbide material.
Excellent cutting results and enhanced productivity.
Wide Compatibility: compatible with most desktop or industrial CNC machines. Used for carving, engraving, milling, dadoing, boring, routing, slotting in materials like density board, wood, acrylic, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc..
Used for PCB, SMT, the CNC, mold, plastic, thin copper/aluminum/stainless steel and other precision metal parts processing.
High efficiency: These bits own sharp edge which is able for fast engraving that makes high efficiency.
Fast chip-removal speed leaves an unobstructed path for the end mill.
Well made & Excenllent Performace: Mirror polishing and space of Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal.

Check Stock

Lenink 4 Pack Mini T Track Hold Down Clamps, T-Track Clamp Compatible with 3018-PRO,3018-MX3,3018-PROVer,1810-PRO CNC Router Machine

Compatibility: The T-Track clamp kit is compatible with 3018-PRO/3018-MX3/3018-PROVer/1810-PRO CNC router machine, it can hold most of the materials of a desktop CNC router machine.
Portable and Practical: Adjustable T Track hold down clamps are very easy to install, can accommodate 30mm materials and hold them firmly in place.
Wide Range of Use: Not only suitable for 3018 series desktop CNC router machines, but also suitable for positioning and fixing other woodworking or metalworking, such as drill presses, CNC, table saws, routers, jigs, vertical milling machines, etc.
Strong and Sturdy: Made of high quality zinc-aluminum alloy, strong and wear-resistant, long service life.
Packaging Includes: 4 Pcs T-Track hold down clamps (Need to assemble by yourself). 6 months super long warranty period.

Check Stock

SpeTool 1/4 Shank Carbide End Mill for Aluminum Cut (3 Flutes, 3.5 inch Long) Non-Ferrous Metal Upcut CNC Spiral Router Bit

Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/2 inch Cutting Length, 3-1/2 inch for Total Length.
The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

CNC Spoilboard Surfacing Router Bits, SIMILKY 1/2 inch Shank 2 inch Cutting Diameter, Slab Flattening Router Bit Planing Bit Wood Milling Cutter Planer Woodworking Tool

...ce of the spoil board, but also for trimming and slotting/grooving.Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand)..
[APPLICABLE EQUIPMENT] Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. wood engraving machines, trimming machines, etc..
[APPLICABLE EQUIPMENT] Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machines, trimming machines, etc..

Check Stock