Best Clock Movement Repair

2 Pieces High Torque Long Shaft Clock Movement Mechanism with 5 Different Pairs of Hands Clock Repair Parts Replacement (20 mm, Gold)

  • DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself.
  • Size: the total shaft length is approx. 20 mm/ 0.8 inches, and the thread length is approx. 14.6 mm/ 0.57 inches.
  • Jump second movement is suitable for 9 - 13 mm/ 0.35 - 0.51 inches thickness of clock panel.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment.
  • Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts.
  • 5 Different styles of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.
Check Stock

Gatuida 1Pc Clock Mechanism Replacement Quartz DIY Wall Clock Movement Clock Repair Parts Replacement

  • Clock Movement Mechanism - Ultra silent Scanning Design, two different shaft length quartz movement for your choice. Sweep clock movemen without any noise which can offer your sleep a silent environment..
  • Two Clock Mechanism Size -Short total shaft length 16 mm (0.63 in), thread length 8mm (0.315 in), suit for 3 - 6 mmthickness clock panel. Long Total sharft length 23 mm (0.9 in),thread length 15.4 mm (0.6 in),suitable for 9 - 13 mm thickness clock panel..
  • DIY Wall Clock Repair Parts Kits: Including 2 x different size clock movement,5 Pairs Hour Minute hands,3 xSecond hand and 2second caps, easy for installation,Multiple choices in one set..
  • Clock Hands Size:The size indicated in the picture shall prevail, they were made of aluminum, please do not install them with too much pressure or they will be bent, please check the sizes before buying..
  • Wide Application - DIY quartz wall clock replacement movement parts, suitable for repairing, replacing or making a clock,most can be applied to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc..
Check Stock

2 Pieces High Torque Long Shaft Clock Movement Mechanism with 5 Different Pairs of Hands Clock Repair Parts Replacement (28 mm/ 1.1 Inches)

  • DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself.
  • Size: the total shaft length is approx. 28 mm/ 1.1 inches, and the thread length is approx. 20 mm/ 0.79 inches.
  • Jump second movement is suitable for 13-18 mm/ 0.51- 0.71 inches thickness of clock panel.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment.
  • Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts.
  • 5 Different styles of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.
Check Stock

2 Pieces Silent Clock Movement Mechanism Long and Short Shaft Clock Mechanism with 6 Different Pairs of Hands DIY Clock Repair Parts Motor Replacemen

  • Clock Movement Mechanism - Ultra silent Scanning Design, two different shaft length quartz movement for your choice. Sweep clock movemen without any....
  • Two Clock Mechanism Size -Short total shaft length 16 mm (0.63 in), thread length 8mm (0.315 in), suit for 3 - 6 mmthickness clock panel. Long Total....
  • DIY Wall Clock Repair Parts Kits: Including 2 x different size clock movement,5 Pairs Hour Minute hands,3 xSecond hand and 2second caps, easy for....
  • Clock Hands Size:The size indicated in the picture shall prevail, they were made of aluminum, please do not install them with too much pressure or....
  • Wide Application - DIY quartz wall clock replacement movement parts, suitable for repairing, replacing or making a clock,most can be applied to....
Check Stock

Silent Quartz DIY Wall Clock Movement Non-Ticking Repair Parts Replacement Kit Including 4 Pairs Hour Hands and Minute Hands 2 Second Hands

  • ⏰Long spindle clock movement: wall clock mechanism replacement movement parts with long shaft.
  • ⏰CLOCK HANDS KIT - Includes 4 pieces of minute hands and 4 pieces of hour hands, 2 second hand and 1 second caps, easy for installation.
  • Simple and elegant design, these replacement parts suit well to different styles of clock frame.
  • ⏰Clock Movement Wide Application: suit for repair and replacement your clock, pretty good for framless 3D wall clock.
  • ⏰CLOCK MECHANISM SIZE -Total shaft length is 16 mm (0.63 inches), thread length 8mm (0.315 inches), suit for 3 - 6 mm thickness clock panel.
  • ⏰RANGE OF USE - perfect for clock replacement, replacing or making a clock.
  • Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.
Check Stock

8 Pieces Long Shaft Clock Movement Mechanism Quartz Clock Movement with 8 Different Pairs of DIY Clock Hands Clock Repair Parts Replacement for Clock Repair Replacement

  • DIY clock repair kit: you will get 8 pieces of high torque long shaft clock movements with 16 different pairs of hands.
  • These replacement parts suit well to different styles of clock frame, which are nice for repairing, replacing or making a clock by yourself.
  • Size details: the total shaft length is approx. 13 mm/ 0.51 inches, and the thread length is approx. 5 mm/ 0.2 inches.
  • Jump second movement is suitable for 1 - 4 mm/ 0.04 - 0.17 inches thickness of clock panel.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers high accuracy and dependability, and they are equipped with sweeping motion but without ticking, providing you with a quiet environment.
  • Wide application: these clock repair replacement parts fit well for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and also suit to be applied as DIY quartz wall clock replacement movement parts.
  • 16 Different styles of hands: this clock mechanism replacement set comes with 16 pairs of clock hands in different styles and length for your options, making them nice for clock creations and repairs while providing a decorative effect.
Check Stock

2 Pieces Clock Movement Mechanism Clock Hands High Torque Long Shaft Clock Movement Replacement with 5 Different Pairs of Hands Clock Repair Parts Replacement (13mm.18mm)

  • DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself.
  • Size: the total shaft length is approx.16 mm/ 0.63 inches, and the thread length is approx. 9 mm/ 0.35 inches.
  • Jump second movement is suitable for 5 - 9 mm/ 0.2 - 0.35 inches thickness of clock panel.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment.
  • Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts.
  • 5 Different styles of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.
Check Stock

4 Pieces Quartz DIY Wall Clock, Clock Numerals Kit, Movement Mechanism Battery Operated Clock Motor Kit with 6 Different Pairs of Hands for DIY Clock Repairment

  • Package includes: 2 pieces Arabic numerals and 2 pieces roman numerals are in gold and silver colors, each color each style has 1 piece.
  • 4 Pieces quartz clock movement mechanisms with 6 sets of clock hands with different styles and length, enough quantity for daily use and replacement.
  • Dimension details: the single word of Roman and Arabic numerals is 1.1 inches in height, the total shaft length is approx 16 mm/ 0.62 inches, and the thread length is approximately 6 mm/ 0.24 inches.
  • The high torque clock movement is suitable for 9 - 13 mm/ 0.35 - 0.51 inches thickness of clock panel and the clock hands fit for a diameter of 25 - 35 cm/ 9.9 - 13.8 inches clock surface.
  • Easy to use: you only need to use the glue, then you can easily make the clock panel, the whole applying process is simple and fast.
  • The installation of the hands is also very simple, and you just need to keep the hour hand and minute hand parallel, then place the hour and minute hands on the movement in turn.
  • Multiple styles and colors: 4 pieces clock numerals kit includes gold and silver colors, which can be matched and selected according to your favor.
  • With 6 pointers of different styles and lengths and simple and stylish design of the clock hands, so that you are able to choose various ....
Check Stock

2 Pieces Quartz Clock Movement Mechanisms Non Ticking Clock Mechanism with 8 Clock Hands Sets of DIY Movement Kits Replacement (13 mm)

  • Package includes: you will get 2 pieces clock quartz movement mechanisms with 2 sets of accessories, and 8 sets of different pointer kits.
  • There are various styles to choose which is very suitable for different styles of clock frames.
  • Size: the total shaft length is approx. 13 mm/ 0.5 inch, and the thread length is approx. 6 mm/ 0.24 inch.
  • The clock movement mechanism are suitable for 1 - 3 mm/ 0.04 - 0.12 inch thickness of clock panel, and clock hands fit clock face 25 - 35 cm in diameter, when you install this clock movement kit, please check the sizes.
  • Quality material: the movement is made of ABS material, and the clock hands are made of quality aluminum, which is light in weight and corrosion-resistant, sturdy for a long time to use, providing you with nice use and decorative effect.
  • Clock design: the design of the clock hands are simple and stylish which have a various styles.
  • The long-axis clock mechanism provides accuracy and reliability, and there is no ticking sound provides you with a quiet environment.
  • Widely applicable: these clock repair replacement parts are suitable for cross-stitch, 3 dimensional embroidery, craft clocks, frame-less wall clocks, especially for DIY quartz wall clock to replace for using.
Check Stock