Best Clock Quartz Clock

UMEXUS Retro Indoor Outdoor Clock, 12 Inch Waterproof Wall Clocks 3D Steampunk Non-Ticking Silent Battery Operated Large Digital Display Clock for Patio, Garden, Pool, Lanai, Fence, Porch (Grey)

  • ...ol, kitchen, bedroom or bathroom. the wall clock is made of heavy-duty resin material, the clock can endure the cold of Minnesota in the winter and work well in the heat of Texas in the summer, keep work properly in any heavy weather..
  • Accurate Time and Quiet - The Outdoor Clock uses a High-Quality silent no-ticking quartz movement, guarantee accurate time and ultra-quiet environment. The clocks operate by one AA battery (not included)..
  • Easy to Read Wall Clock - Big 12-inch basic dial quartz wall clock with large Arabic numeral analog display makes it easy to see from any corner of your pool, garden, patio, den, living room, or office. Resin one-piece clock face makes it easy to clean..
  • Water & Weather Resistant - Waterproof outdoor clock has fine sealed with rubber gasket cover, good to protect front side and the quartz movement from rain. Clock face made with PVC, moisture avoiding, excellent faced to any weather at outdoor..
  • Decorative Clock and Ideal Gift - Indoor/outdoor decorative clock was designed with steampunk style design and high quality. It's not only an indoor outdoor clock, but also an exquisite decoration to add a touch of style to your home, from the living room to the garden. Best gift for your family and friends, an excellent gift ide....
Check Stock

7 Pcs Clock Movement Mechanism Clock Hands High Torque Long Shaft Clock Movement Replacement with 5 Different Pairs of Hands DIY Clock Repair Parts Replacement

  • Compatible Mechanism: Good for repairing, replacing or making a clock by yourself. Repair Hands Clock Motor movement can match to diverse clocks,such....
  • Decorative Clock Hands: Movement Hands Clock Motor suit for DIY clock , other clock creations.
  • get to pick out the hands that look best with your....
  • Total Shaft Length: 13 mm ( 0.51 inches), thread length: 6 mm (0.24 inches), suitable for 1-3 mm (0.04 - 0.12 inches) thickness clock panel..
  • Package included:1 x Quartz clock movement+1 x Second close nut+1 x Minute hand+1 x Hour hand+1 X Plastic washer+1 X Brass washer+1 X Brass nut.
  • Wide Application: Quartz Repair Mechanism Kit fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially....
Check Stock

OCEST Large Wall Clock 13 Inch Indoor Outdoor Clock Waterproof with Thermometer Large Display Silent Non-Ticking Battery Operated Decor Wall Clock for Bathroom Living Room Kitchen Pool Patio Garden

  • Perfect Indoor Outdoor Clock-- The hanging wall clock with excellent weather resistant function, can keep work properly in any heavy weather.....
  • Accurate Time and Temperature – The Outdoor Clock uses a High Quality imported silent no-ticking quartz movement, guarantee accurate time and....
  • Large Display Clock-- Big 13 inch basic dial quartz wall clock with black Arabic numeral analog display make it easy to see from any corner of your....
  • Beautiful Decoration And Gift-- Indoor/outdoor decorative clock was designed with stylish design and high quality. It's not only an indoor outdoor....
  • Water & Weather Resistant - Waterproof outdoor clock has fine sealed with rubber gasket cover, good to protect front side and the quartz movement from....
Check Stock

Ikea Wall Clock, White 25 cm (9 ¾ ')

  • Highly accurate at keeping time as it is fitted with a quartz movement.
  • Dimensions of each clock: Diameter: 11" Diameter: 28 cm".
  • No disturbing ticking sounds. Clock has a silent quartz movement..
  • Alkaline batteries are required in the clock.Battries are sold separately.
  • The clock cannot be used with rechargeable batteries..
Check Stock

2 Pieces Silent Clock Movement Mechanism Long and Short Shaft Clock Mechanism with 6 Different Pairs of Hands DIY Clock Repair Parts Motor Replacemen

  • Clock Movement Mechanism - Ultra silent Scanning Design, two different shaft length quartz movement for your choice. Sweep clock movemen without any....
  • Two Clock Mechanism Size -Short total shaft length 16 mm (0.63 in), thread length 8mm (0.315 in), suit for 3 - 6 mmthickness clock panel. Long Total....
  • DIY Wall Clock Repair Parts Kits: Including 2 x different size clock movement,5 Pairs Hour Minute hands,3 xSecond hand and 2second caps, easy for....
  • Clock Hands Size:The size indicated in the picture shall prevail, they were made of aluminum, please do not install them with too much pressure or....
  • Wide Application - DIY quartz wall clock replacement movement parts, suitable for repairing, replacing or making a clock,most can be applied to....
Check Stock

Quartex Standard Push-On Movement with Hex Nut - Long Shaft

  • Quartz Clock Movement Kit: This clock mechanism is perfect with its clock parts for repairing, replacing, or making your own DIY clock project. The clock movement design keeps foreign matter out of the gears, resulting in years of trouble-free operation..
  • Clock Movement Measurements: Total hand shaft length is 28.6 mm (1 1/8 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
  • Maximum Clock Dial Thickness: 17.5 mm (11/16 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 19.1 mm (3/4 inch). For finding a replacement, measure the threaded portion of the shaft on the old clock movement. If length is shorter or equal to 19.1 mm (3/4 inch), this is suitable..
  • Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
  • Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand ....
Check Stock

Quartex Standard Push-On Movement with Hex Nut - Short Shaft

  • Quartz Clock Movement Kit: This clock mechanism is perfect with its clock parts for repairing, replacing, or making your own DIY clock project. The clock movement design keeps foreign matter out of the gears, resulting in years of trouble-free operation..
  • Clock Movement Measurements: Total hand shaft length is 14.3 mm (9/16 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
  • Maximum Clock Dial Thickness: 3.2 mm (1/8 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 4.8 mm (3/16 inch). For finding a replacement, measure the threaded portion of the shaft on the old clock movement. If the length is shorter or equal to 4.8 mm (3/16 inch), this is suitable..
  • Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
  • Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand ....
Check Stock

2 Pieces Quartz Clock Movement Mechanisms Non Ticking Clock Mechanism with 8 Clock Hands Sets of DIY Movement Kits Replacement (13 mm)

  • Package includes: you will get 2 pieces clock quartz movement mechanisms with 2 sets of accessories, and 8 sets of different pointer kits.
  • There are various styles to choose which is very suitable for different styles of clock frames.
  • Size: the total shaft length is approx. 13 mm/ 0.5 inch, and the thread length is approx. 6 mm/ 0.24 inch.
  • The clock movement mechanism are suitable for 1 - 3 mm/ 0.04 - 0.12 inch thickness of clock panel, and clock hands fit clock face 25 - 35 cm in diameter, when you install this clock movement kit, please check the sizes.
  • Quality material: the movement is made of ABS material, and the clock hands are made of quality aluminum, which is light in weight and corrosion-resistant, sturdy for a long time to use, providing you with nice use and decorative effect.
  • Clock design: the design of the clock hands are simple and stylish which have a various styles.
  • The long-axis clock mechanism provides accuracy and reliability, and there is no ticking sound provides you with a quiet environment.
  • Widely applicable: these clock repair replacement parts are suitable for cross-stitch, 3 dimensional embroidery, craft clocks, frame-less wall clocks, especially for DIY quartz wall clock to replace for using.
Check Stock

Satisfounder Non-Ticking Hands Quartz DIY Wall Clock Movement Mechanism DIY Repair Parts Replacement with 3 Different Pairs of Hands (1/4 Inch Shaft Length)

  • ♥High torque movement: long spindle quartz clock replacement movement parts with metal hook and 3 different pairs of hands(2 black and 1 white), good for repairing, replacing or making a clock by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well..
  • ♥ Size: total shaft length is 13 mm (1/2 inches), thread length is 6 mm (1/4 inches).
  • Sweep second movement, suitable for 1 -4 mm (1/ 25 - 5/32 inches) thickness clock panel.Please choose the right size according to picture 2 before purchase..
  • ♥ Three of most popular clock hands. Different Size,Color and Styles. Meet different needs only in one package. The Diameter of Clock Panel should be more than 230mm / 9.06in. The clock hands should be less than 230mm / 9.06in..
  • ♥ Compatible clock: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc..
  • ♥ Package contents: a clock movement,a metal hook,3 Second hands,3 Minute hands,3 Hour hands,3 Plastic washers,3 Brass washers and 3 Brass nuts,come with the specially designed protect box..
Check Stock