Best Clip Pins For Clevis Fasteners

Danco 88979 Bathroom Pop-Up Rod Clips, Chrome

  • Designed to be used with a lift type drains/pop-up drain assembly.
  • Connects pull rod and stopper allowing for stopper to open and close.
  • Restores function to bathroom sink drain assemblies.
  • Chrome finish matches most existing fixtures.
  • Includes (1) small hole clevis clip and (1) large clevis clip.
Check Stock

TARAZON CNC Billet Forward Controls Footpegs for Harley Davidson Dyna Street Bob FXDB 2006-2017/ Low Rider FXDL 2000-2017/ Super Glide FXDC 2000-2017

  • Forward controls made simply and ergonomically: Flush, countersunk fasteners used for a clean, uncluttered appearance.
  • These controls offer outstanding good looks, are user-friendly, & provide excellent value in a moderate price range.
  • Extended Forward Controls, Chrome. *Not compatible with most engine guards or with stock exhaust on '08-'16 FXDF, '09-'10 FXDFSE, '10-'16 FXDWG or '14-'16 FXDL. As a guideline, we suggest the Standard Controls, P/N 9063, for riders with a 33" or shorter inseam.
  • Parts Included: (1) Shift Assembly, Extended Forward Control, (1) Brake Assembly, Standard Forward Control, (1) Assembly, Brake Rod and Jam Nuts, (1) Shift Peg. (1) Hardware Kit Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wr....
Check Stock

MSR Snowshoe Field Service Kit

  • Offers complete and easy field maintainability of all MSR snowshoe bindings and emergency replacement of Lightning snowshoe deck rivets..
  • Clevis Pin Assembly: (2) Clevis Pins, (2) Split Rings, (2) Washers.
  • Axis Hardware: (1) Pin, (1) Pull Tab, (1) Split Ring.
  • Strap Retainers: (3) Expedition, (3) Standard.
  • Rivet Field Repair Hardware: (1) Screw, (1) Lock Nut.
Check Stock

4 Packs Quick Release Pin,Marine Grade 1/4 Inch Quick Release Pin with Ring for Boat,Bimini Top Deck Hinge Marine Hardware Full 316 Stainless Steel, Bimini Top Pin, Marine Hardware

  • Material: All parts are made of marine grade 316 stainless steel, excellent seawater corrosion resistance and durable..
  • Specifications: Weight 15 grams, volume 30 x 40 x 10mm, tongue pin diameter 8mm..
  • Widely Used: Every production shipment tested and certified. Can be used for marine mountain seat, stainless steel pipe clip, ship outfitting, shipbuilding etc..
  • Unique Design: The spring loaded ball is fixed in place at the needle tip. Spring loaded clevis pins slidable springs with toggle pin, helps easily replace different sizes of bimini tops..
  • Package Includes: 4 pcs quick release pins w/ drop cam & spring, all parts are made of 316 stainless steel..
Check Stock

Performance Tool W5359 74pc Universal Clevis Pin Assortment

  • Contains 8 most popular sizes of clevis pins.
  • Plastic Storage Case That is Clearly Marked to Help You Stay Organized.
  • 8 each hair pins sizes: 7/64--Inch by 1-5/8--Inch 20 each, 5/64--Inch by 1-5/16--Inch.
  • Hair Pins Sizes: 8 each 7/64--Inch by 2-5/16--Inch, 7 each 9/64--Inch by 1-3/4--Inch.
  • Tiller tine Pins Sizes 18 each 5/16--Inch by 2--Inch.
Check Stock

Titan Attachments 3 Point Tractor Drawbar Trailer Hitch Fits Category 1 Tractors Quick Hitch Compatible 8000 LB Towing Capacity Towable Clevis Hook 2 and 1 7/8 Ball Mount Included

  • QUICK HITCH COMPATIBLE: This adapter is designed to fit a Category 1, 3 Point hitch with a quick hitch. This allows you to easily connect your tractor to your 3 Point implements within minutes saving you time and labor..
  • TOWING BALLS AND CLEVIS HOOK INCLUDED: The quick hitch compatible tractor drawbar comes equipped with a clevis hook for pulling items with a chain and hook, 2" ball which is standard fit for most utility trailers, and a 1-7/8" ball for smaller trailer applications. lso come equipped with the cat 1 top link pin..
  • CAT 1 LIFT PINS AND TOP LINK PIN INCLUDED: The trailer hitch frame comes equipped with two lower Category 1 lift pins and a Cat 1 top link pin..
  • DURABLE CONSTRUCTION: This frame is constructed with 3/8" thick structural steel that is rated at an 8,000 LB towing capacity. This thick steel is then powder coated to protect against rust and corrosion, so it continues to perform like new, time after time..
  • DIMENSIONS: Weighing 36 LB, the tractor drawbar frame is 25.5" wide and stands 21.25" high. The included lower lift pins provide an overall width pin to pin of 32.5"..
Check Stock

OTC 5054 Air Brake Service Kit for Class 7 and Class 8 Vehicles

  • OTC's Air Brake Service Kit contains the tools needed to remove the slack adjusters and push-rod clevis pins used in the S-cam brake systems of Class 7 & 8 vehicles.
  • Set works on manual or automatic slack adjusters.
  • Included tools: No. 5055 and 5056 Slack Adjuster Pullers, and No. 5057 Brake Clevis Pin Press.
  • Sturdy blow molded storage case keeps contents protected and secure when not in use.
  • Crafted from high-grade materials to ensure quality performance over the lifetime of the tools.
Check Stock

Factor 55 ULTRAHOOK Winch Hook with Shackle Mount - RED

  • TWO METHODS OF USE: conventional hook opening, or shackle mount. Designed for both steel cables and synthetic winch ropes. No rope splicing required double shear pin design accepts rope/cable eyes..
  • LIGHTWEIGHT: Precision CNC machined 7000 series Military Grade Aluminum WEIGHT: 32oz Foldable to stow rattle free against fairleads..
  • FIT: For rope and cable diameters up to 3/8", Shackle pin mounting hole accepts shackle pins (.875 diameter). 5/8 diameter 6AI-4V grade V titanium double shear pin..
  • ULTIMATE STRENGTH: Hook Throat Opening: 31,000 pounds, Shackle Pin Mount: 48,000 pounds..
  • SAFETY: Double locking safety clasp lock the safety clasp with the included clevis pin. Latch lock clevis pin stored conveniently in hook body. Integrated EPDM rubber pads for fairlead surface protection MAX RATED LOAD: 16,000 pounds.
Check Stock

RONSTAN RF51100 Series 50 AP Block Universal Head Single Pulley, 3310 Lbs Load Capacity, 2\ Sheave

  • Pulleys for fibrous rope sizes 1/4" to 1/2"..
  • Series 50 all purpose pulleys are used in multiple industrial and OEM application that require an efficient and durable product.
  • Load ratings for these pulleys are exceptionally high for their size, starting at 1650lb for the all purpose single.
  • Becket pins are removable so lines can be spliced prior to fitting, and are ingeniously locked into position without the use of clevis pins, split rings or tools.
  • Shackles have slotted pins to avoid fouling lines.
Check Stock