Best Claw Puller

9 Pieces Keyboard Lube Switch Puller Kit IC Extractor Switch Puller Key Cap Puller Elbow Tweezers Pointed Tweezers Flat Head Grease Brush Fine Head Grease Brush for Disas

Set includes: the package comes with 9 pieces keyboard lube switch puller tools, including IC extractor, switch puller, key cap puller, elbow tweezers, pointed tweezers, flat head grease brush and fine head grease brush, bringing your life with more convenience.
Clean set: by using key cover uninstall in the suite, you can easily remove all the keyboards, then you can easily clean the keyboard.
When you need to customize the keyboard, switch board can help you easily switch, we also provide different sizes of grease brushes to help you clean the keyboard regularly.
Practical life tools: as for keyboard and electronics enthusiasts, the IC chip remover tools are an essential tool set to provide more convenient help.
The stem holder in this package is a 4-forked tool clamp that clamps the stem and picks up any small part (such as spring or IC), and the switch extractor can be applied as IC extractor or chip extractor, which can be a good gift for electronics lovers.
Comfortable to handle: the keyboard cleaning kit are designed to be ergonomic, making them feel more comfortable and easier to hold, 4-claw design of 4-claw picker can firmly grasp small objects such as fixing screws, and it is not easy to fall. The non-slip material of the IC extractor can red....

Check Stock

OOir onOO Manual Stand Up Weed Puller Head Replacement Tool, 4-Claw Steel Head Design, Black

Upgrade Design – NEW and IMPROVED steel head design for a stronger weed removal tool..
Premium Material – Standing weed puller Made of steel, Not easy to break.Note: This Weed Puller has no handle, only manual weeding head..
Stand Up Design – Easily Remove Weeds Without Bending, Pulling, or Kneeling..
Modern & Safe Design – Steel 4-claw design works on all soil types especially after a good rain or watering..
Wide Application – The weed puller is workable for crabgrass, thistle, tap root, crab grass, taproot, plantain, clover, burdock, bush etc. It is a good tool for your garden, backyard, patio, lawn, etc..

Check Stock

Sinoer Hand Weeding Tool for Garden,Weed Removal Cutter,Root Removal Weed Puller,Gardening Weeder Tools for Garden Lawn Yard

Root Remover Tool - Naswei Weed Puller is designed for the permanent removal of weeds. The dandelion puller will remove the roots of plants so that....
Your Gardening Tools - Save time and your back with the stand-up weed puller, which is built with a 39-inch shaft to weed all the way down to the....
Simple operation - Aim the root remover tool at the weeds, start from the upright position, insert the steel claw into the center of the weeds, step....
All-in-one Weeding Tool - Why invest in half a dozen different tools for gardening when you can tackle them all with the step and twist garden/lawn....
Guarantee - We support a detailed answer or a full refund whatever your dissatisfaction about the assembly or quality of our weed puller. Naswei is....

Check Stock

ECOgardener Stand Up Weed Puller - Garden Hand Weeder Long Handle Heavy Duty Claw Head Design, Best Manual Weed Pulling Tool for Gardening

Groundbreaking design: The claw head’s clamp-like mechanism pulls weeds from the roots. Simply press the weeder into the center of the weed, tilt the long handle, and pry the weeds, roots, and all! This weed puller works on any soil type, including compacted and clay soil..
Durable and weatherproof: The ECOgardener garden hand weeder boasts a powdered coated, solid steel claw head that’s resistant to rust, moisture, and wear and tear. The long handle is durable and coated to protect from moisture. This weed puller is guaranteed to last you years!.
Effortless weeding: The long, durable wooden handle makes weed-pulling less stressful on the back, knees, and hands—no need to bend over or dig through dirt to pull the weeds. The ECOgardener garden hand weeder does all the work for you!.

Check Stock

TEKTON 10-1/2 Inch Fencing Pliers | PSP10010

STAPLE AND NAIL PULLER: The parallel jaws can grip the crown of a staple or the head of a nail and easily pry them out.
WIRE SPLICER: Use the top and bottom jaws to isolate two strands of wire for splicing or separating.
the bottom jaws are large enough to grip and twist multiple strands of wire.
STAPLE STARTER: Use the two jaw openings to hold a staple in place and drive it with a hammer.
start a staple with one hand by gripping it in the upper jaws and swinging it into the post.
STRIKING FACE: The flat surface is less prone to chipping and deformation than a serrated surface.
hit the striking face with a hammer to drive the claw under a staple.
STAPLE CLAW: The longer, more pointed claw gives better access for prying out staples.

Check Stock

POPLOCK 17-inch Indexing Pry Bar Nail Puller/Adjustable Cats Paw Deck Wrecker / 11-Position/Pry Bars Nail Remover/Prybar/Trim Pullers for Baseboard/Nail Pulling/Floor Removal/Demolition

Indexing Pry Bar Nail Puller - Index Pry Bars Nail Puller with new head adjustable design. Flat sharpening edge prybar with opposite slide curved angle on Prying ends for carpenter fast wrecking.
Adjustable Cats Paw Deck Wrecker - Innovative Unique Adjustable Nail Puller PryBar Design with 2 sides push locking mechanism apply to Nail Puller wrecking bar. User use as cats claw extractor tool..
Indexable Pry Bar - Index Nail Puller Prybars with incremental angle 18 degrees allows user to choose up to 11 different angles for prying in difficult confined spaces and nail pulling..
Adjustable Nail Pulling Strength - Nail pulling torque exceeds US ANSI requirement (ASME B107.60-2004 ). Heavy duty gear design allow user to apply on deck wrecking , demolition , annihilator pry bars.
Nail Remover Extractor Pry Bar Tools Easy To Use - Extractores De Uñas Barra De Palanca, Hacer estallar las uñas en posiciones extrañas. hacer palanca en espacios confinados difíciles y tirar de clavos..

Check Stock

KUNTEC 3 Jaw Inner Bearing Puller Heavy Duty Pilot Sleeve Gear Extractor Internal External Pulling for Motorcycle Wheel Car SUV

【Strong Material】3-Jaw Inner Bearing Puller Tool is constructed from carbon steel, the overall heat treatment, strong and durable. Corrosion-Resistant black oxide finish, preventing damage to bearings..
【Well Equipped】3 Jaw Inner Bearing Puller removes bearings, pump bearings, bushings, removes all sleeve type bearings with 1/2"-2" inside diameter.
【Advantage】The three-jaw design can apply pressure evenly to prevent damage to the bearing and ensure stability during use. There are two installation methods for the claw foot..
【Labor Saving】Structure design, gently turning the small wrench can produce a strong pull force.
【Wide Application】3 Jaw Bearing Puller is designed for automotive flywheel, motorcycle wheel, bicycle wheel, pump bearing, generator bearing, machine bearing etc.

Check Stock

SCITOO 16PCS Blind Inner Bearing Puller Hole Collet Bearing Race Seal Puller Removal Tool Slide Hammer Tool Set

【Compatible Vehicles】 Fit for bicycles, motorcycles, most compact cars, mid-size cars and light pickup trucks 8-53mm bore bearing. Includes various sizes and types of collets, blind, Internal, bearing puller, with wide application..
【Package】 1x Sliding Hammer Assy, 1x 2 Claw Puller Assy, 3x Screw Adaptors, 10x Collects: 8-11mm 12-17mm 13-23mm 18-23mm 24-29mm 30-34mm 34-38mm 39-43mm 44-48mm 49-53mm 54-58mm, 1x Counter Stay Puller, 1x blow molded case for storage and carrying..
【Product Usage】 Used to remove tightly jammed axles, wheeling bearings, and bushings on a wide variety of vehicles. This bearing puller tool is easy to operate, suitable for professional mechanics and DIY..
【Advantage】 The SCITOO tool set has the best performance of high hardness and high toughness, durable and stable. The chuck is made of chrome molybdenum steel for excellent rust proof andcorrosion. You can buy with confidence..
【Important Note】 We provide 1 year warranty for you. We will randomly send out red or blue portable case. When doing automotive maintenance always make sure all the tools are correctly used . Any question or problem, feel free to contact us..

Check Stock

Bonvoisin 3 Jaw Puller 4' 6' 8' Gear Bearing Puller Set Pulley Puller Gear Removal Tool for Slide Gears Bearings Flywheels Pulleys (3 Piece Set)

[Surface Phosphating Treatment]-The gear puller has undergone phosphating treatment and has the following advantages: ①Strong corrosion resistance.
②Enhanced adhesion with bearings and other machinery.
[3 or 2 Claws Interchange]-3 claws / 2 claws can be easily interchanged, free from site restrictions, flexible operation and simple replacement..
[High hardness]-The claw puller adopts overall heat treatment, with high hardness, large torque, and labor-saving operation..
[Wide Applications]-The pulley puller can be used to remove slide gears, pulleys, bearings, bushings, and flywheels without causing any damage to your application..
[One-year Warranty]-Within one year of purchase, if something goes wrong with your product, you can replace it for free. Please purchase with confidence..

Check Stock