Best Clamping Parts

ATPEAM Handle Fixture for Heat Press Machine | Heat Press Handle Replacement for Heat Press Machine Quick Clamping Fixture

  • Quick Clamping Fixture: The handle fixture is special used for heat press machine, quick clamping fixture. Bring you a new and different using feeling.
  • Durable Quality: The heat press handle replacement is made of high quality carbon steel material, sturdy and durable.
  • Comfortable Handle Fixture: The handle fixture adopts ergonomic design for comfortable grip and energy saving..
  • Universal Fitment: Special used for heat press machine, quick clamping fixture. It is a great replacement for the broken fixture on your heat press machine..
  • Easy to Install: You need a screwdriver (not included) for installation and removal. Save time and save money. Non original aftermarket parts..
Check Stock

4 Pcs Locking C Clamp Set Locking Pliers with Fixed and Swivel Pads 6 Inch 9 Inch 11 Inch Metal Tools Welding Clamps for Home Farm

  • Locking C Clamp Set: 4 welding clamps are included, including 1 piece of 6 inch locking C clamp with fixed pad, 1 piece of 6 inch locking C clamp with swivel pad, 1 piece of 9 inch locking C clamp swivel pad and 1 piece of 11 inch locking C clamp with swivel pad, meeting your everyday needs.
  • Sturdy to Use: the jaw is forged with carbon steel as a whole, featuring with good toughness.
  • The handle of stamped steel plate, clamping object without deforming.
  • The heat treatment adjusting rod is easy to adjust the suitable size.
  • Additionally, the serrated jaw of locking C clamp has a strong clamping force.
  • Adjustable Design: the locking C clamp is easy to adjust to the appropriate clamping size because of the fine tuning knob design.
  • The quick release handle is convenient and labor saving.
  • Moreover, the spring provides good tensile force.
  • Firm Locking: welding clamps are mainly applied for clamping parts for riveting, welding, grinding and other processing.
  • Since the jaw can generate large clamping force, the clamped objects will not loosen.
  • Essential Supplies: in daily life, the lock C clamp is suitable for electricians and welders to clamp welding boards.
  • And woodworkers can use this metal tool to quickly clamp boards or frames.
Check Stock

Taytools 388107 Quick-Adjust Vertical Workbench Surface Hold Down Clamp, Fits 3/4” Bench Dog Holes

  • ...This clamp will work in tops as thin as 3/4 inch thick..
  • The cast zinc base is 1-1/2 inches in diameter and 1-1/2 inches tall. The base and post are black coated to resist corrosion..
  • The moveable jaw slides easily along the serrated rails and then locks down tight when the handle is tightened offering slip-resistant clamping. The jaw is made from reinforced malleable steel and provides powerful and rigid clamping. The serrated carbon steel rail has an hourglass profile to resist flexing and twisting.
  • The moveable clamp jaw features smooth-turning carbon steel Acme threads and can generate up to 600 pounds of clamping pressure. The screw end has a 1 inch diameter swivel pad with a non-marring clamp pad to allow gripping of odd- shaped parts. Overall spindle travel is 2 inches. Threads are black coated to resist corrosion. The ergonomic soft grip Plastic/TPR handle optimizes torque and reduces hand fatigue..
Check Stock

Mophorn K11-200 Lathe Chuck 8 Inch 3-jaw,Lathe Chuck Self Centering Reversible Hardened Steel With Internal and External 2 Set Jaws

  • Premium Steel Structure: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC 58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • Large Clamping Range: This chuck includes two sets of internal and external jaws. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
  • High-Performance Chuck: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Effortless Operation: The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient. The chuck has 1" x 8 TPI Thread and 3/4" x 16 TPI Adapter (Mounted on the Chuck).
Check Stock

Wilton 78A Woodworking Vise, Rapid Acting, 4" x 7" Pivot Jaw, 10" Opening (63144)

  • ADAPTABILITY: Front jaw pivots 10° to allow for clamping irregular shaped parts..
  • EXPANDED CAPACITY: Pivot jaw can be removed for wider clamping requirements..
  • VERSATILITY: Front jaw moves up 9/16" to act as a full length dog..
  • LONGER LIFE: Metal housing fully encloses the screw..
  • LIFETIME GUARANTEE: Covered by Wilton's lifetime warranty..
Check Stock

MAXPOWER 3 Piece Locking Pliers Set

  • SIZES INCLUDED – 6 inch Long Nose Locking Pliers, 10 inch Wide Open Locking Pliers and 7 inch Offset Locking Pliers.
  • WIDE OPEN LOCKING PLIERS - One pliers for all clamping job. Up to 2 inch (50 mm) clamping capacity, ideal for pipes and large objects.
  • OFFSET LOCKING PLIERS - 90 degree angle head, long jaws reach into tight spaces to pick and grip tiny parts.
  • LONG NOSE LOCKING PLIERS - Straight jaw with curved profile section reaches into narrow spaces and holds round, hex, and square shapes, flat stock, and sheet materials.
  • LONG-TERM RELIABILITY – Jaws made of Cr-V steel with sharp teeth provide a sure bite.
Check Stock

MAXPOWER 4PCS Locking Pliers Clamp Set, 7 inch 90 degree Offset Locking Pliers, 7 inch Locking Pinch Off Pliers, 9 inch U Shaped Jaw Locking Pliers, 8 inch Locking Sheet Metal Clamp

  • 90° Jaw left angle locking pliers x 7" Length, Max opening capacity 2-3/4" (70mm), Throth Depth 2-3/4" (70mm), Long nose jaw make clamping and holding parts, nuts and bolts easier access into narrow and deep tight space.
  • Locking Sheet Metal Clamp x 8" Length, Clamping range of 1-3/16" mm (30mm), For tightening, bending and crimping thin sheet steel.
  • U-shaped Welding Pliers x 9" Length, Clamping range of 2-5/16" (60mm), For clamping profiled, pipes or flat material.
  • Locking Pinch Off Pliers x 7" Length, pinch-off and locks on to tubing, suit for blocking flow of gas, Use only to pinch off soft copper, aluminum or any soft metal tubing.
  • There's a hex Hole on knurled thumb screw for using with hex keys( NOT included ), Offering more tightens to adjust pressure and draw materials together.
  • MAXPOWER Locking welding pliers and clamps set, Constructed with chrome-vanadium steel jaws with nickel plated finish.
Check Stock

Z011 3-Jaw Lathe Chuck, 10-35mm Zinc Alloy Mini Lathe Chuck, Self Centering Wood Turning Chuck with Connecting Rod for Mini Lathe, Power Lathe Accessories

  • Material: Made up of zinc alloy material, good corrosion resistance, not easy to rust. High strength and hardness, small size, comfortable to wear..
  • Clamping Range: The clamping range of this chuck is between 10-35mm(0.39-1.38inch), which is suitable for clamping a variety of industrial parts..
  • Application: Design of three jaws, self-centering, widely used for woodworking lathe..
  • Accurate: The high precision design of the chuck-bevel gear guarantees the accuracy of the chuck operation..
  • Compact Size(D*H): About48x21mm/1.89x0.83inch. The compact chuck is small in volume, easy to use..
Check Stock

Router Lift, Metal Router Lift System Kit for Router Table Saw Insert Base Plate, 4 Jaw Clamping, with Strong Grip

  • DIY ROUTER LIFT TABLE: This lifter base is suitable for making your own router worktable for high precise woodworking, easy to install and operate. NOTE: Only include lift part, not included insert plate! The other parts pictured are for display purposes only and need to be purchased separately (link on the details page below).
  • FIRM CLAMPING: The router lift base adopts 4 jaw clamping way, the clamping is firm and stable, not easy to fall off..
  • WIDE LIFTING RANGE: The base supports lifting height up to 51mm, supports machine diameter is 64mm to 66mm, ideal for small trimming machines..
  • EXCELLENT MATERIALS: Composed of aluminum alloy body and stainless steel support rod, with high strength, rust and corrosion resistance..
  • EASY ADJUSTMENT: Come with crank handle, you can easily and accurately adjust the height of the router bit from above the desktop..
Check Stock