Best Clamp on Y pipe

53pcs Cable Clamps Assortment Kit, 304 Stainless Steel Rubber Cushion Pipe Clamps in 6 Sizes 1/2'' 1'' 1.25'' 1.5'' 1.75'' 2''

  • The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site..
  • Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding..
  • The long life clamp is made of double-walled powder coated steel. Align pipe for joining pipe to elbow, pipe to tee, or pipe to flange..
Check Stock

Exhaust Flapper Water Shutter for Mercruiser 807166A3 Y-Pipe 1982-1996

  • Exhaust Water Flapper for Y-Pipe Exhaust Mercuiser.
  • Replaces Part#: 807166A3 / Sierra 18-2732-9.
  • Fits Mercruiser: V6 / V8 with 4" Y-Pipe & Round Pin Holes 1982-1996.
  • Fits into the Y-Pipe on most V6 & V8 models 1982-1996. Prevents water from backing into the manifold. Not for 4.3L Models with 1 piece manifold.
  • OE quality aftermarket replacement, Exact item pictured.
Check Stock

DCT Multi-Angle Adjustable 13ft Band Wood Corner Clamp – Woodworking Clamping Kit that Clamps Picture Frames & More

  • WHAT WILL YOU GET - You will get 50 pcs metal u bracket. The M12 pipe strap clamp is suitable for pipes with a diameter of 12mm/0.47inch. The diameter of the mounting hole is 4mm/0.15inch, the width is 11.7mm/0.46inch, and the thickness is 0.5mm/0.02inch..
  • HIGH QUALITY CLAMP - Tube strap tension clip is made of high-quality 304 stainless steel material, high hardness, corrosion resistance, water resistance, oil resistance. The surface is treated with rust prevention, and it can be used in a humid environment without worrying about rust. The metal pipe clamp adopts superb production technology, the surface is smooth and burr-free..
  • MULTIPLE USE - The u-tube clamp is widely used in stainless steel pipes, rubber hoses, gas pipes, plastic steel pipes, drainage pipes, etc. The rigid pipe strap is suitable for fixing pipe line with oil, water and gas..
  • SLOTTED DESIGN - The slotted design is more sturdy and not easily deformed. The U-shaped slotted design is suitable for fixing pipes on various surfaces and supporting structures. The metal pipe strap can be fixed on the wall and ceiling with screws or expansion screws, and the installation is simple fast..
  • QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange ser....
Check Stock

Exhaust Stamped Y Pipe 3.00 Diameter Single Inlet to 3.00 Diameter Dual Outlets Stainless Steel WSYP300-300SS Wesdon Exhaust Stamped Y Pipe

  • Stamped HEAVY 16 GAUGE Stainless Steel 3.00 DIA SINGLE INLET DUAL 3.00 OUTLETS BY OAL 10.00 INCH LENGTH Y PIPE.
  • Add an “Y” pipe to Create dual exhausts to help Exhaust Faster and Better tone Reduces Interior Resonance Compact design for Ease of Installation....
  • Stainless Steel (Please measure to make sure it fits your Truck) Fits a 3.00 Exhaust Pipe.
Check Stock

Hose Clamp, 8 Sizes 100 Pack Stainless Steel Assortment Adjustable Range 1/4-2in(6-51mm), 304 Stainless Steel Hose Clamp with 1pcs Socket Wrench, for Plumbing, Automotive and Mechanical Application

  • Adjustable Size Range - 8 Sizes Adjustable Pipe Tube Clamps. 100 PACK Organized within a convenient plastic storage case.The hose clamp is flexible and extensible, with adjustable width, and the size range is from 6-51mm (1 / 4in-2in). The hose clamp width ranges 8mm..
  • Durable Quality - No more worrying about rusting and cracking when installing on pipes. Can be applied in the complex environment. The entire hose clamp (including belt, shell and screw) is made of heavy-duty high-quality 304 stainless steel. The hose clamp is sturdy, firm and reliable. Resistant to salt, rust, corrosion, water, and oil..
  • Easy to use - These hose clamps are packed in a transparent storage box according to specifications, so you can choose the size easily. You can adjust the size by tightening the screws on the hose clamp to make the clamp and the pipe fit more closely. The hose clamp has good flexibility and is easy to install and remove..
  • Wide Applications - Hose clamps are firmly locked and can be used to fix hoses, pipes, cables, pipes, fuel lines, etc. Ideal for indoor or outdoor use in automotive, industrial, marine, home, etc. The size of the clamp denotes the inner dimension (id) of the Clamp. 360° seal protection, lock forces concentrated..
Check Stock

ZEONHAK 4 Pack 3/4 Inches Pipe Clamp, Wood Gluing Pipe Clamp Set, Heavy Duty Woodworking Cast Iron Clamp for Metalworking, Woodworking and Frame Assembly, Red

  • MADE OF CAST IRON - This wood gluing pipe clamps are constructed of premium heavy duty cast iron, which is durable and sturdy. The surface of pipe clamp is finished by baking varnish, and the surface is smooth and shiny. The thread spindle is coated with black oxide..
  • ERGONOMIC DESIGN - Woodworking cast iron clamps with ergonomic handle makes clamping easier and reduces hand fatigue. The H-style base prevents the clamp from tipping out. Equipped with multiple steel sheets, the spring clamp clamping ability is stronger..
  • EASY TO USE - The wood gluing pipe clamp is easy to operate. Just slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped..
  • MULTI-PURPOSE - The quick release pipe clamp is multifunctional. It is often used in metalworking, woodworking and frame assembly, ranging from DIY to industrial production. Owning a pipe clamp can bring convenience and fun to your life..
  • 100% GUARANTEE - If our pipe clamp have any quality problems, you can request a full refund and return within 30 days after receiving the products. Quality and customer satisfaction are our top prioriti....
Check Stock

112pcs Hose Clamps Stainless Steel,Stainless Steel Clamps,Hose Clamp Assortment Kit,Adjustable Worm Gear Heavy Duty Pipe Clamps

  • Stainless Steel Material: All fittings on the hose clamp are made of 304 stainless steel, which is sturdy and durable, with good acid and corrosion resistance. You can safely use pipe clamp to fix outdoor pipes without worrying about rusting and cracking.
  • Adjustable Design: All hose clamps stainless steel can be adjusted by screws according to the diameter of the pipe, so that the pipe can be fixed more firmly..
  • Tightly Bound: The tube clamp is very flexible and can be tightly tied to the pipe without loosening, thus preventing liquid leakage.
  • 8 Specifications: There are 112pcs o clamps, including 8 size specifications. Their adjustable range is 24 pieces of 8-12mm, 18 pieces of 10-16mm, 18 pieces of 13-19mm, 12 pieces of 16-25mm, 10 pieces of 18-32mm, 10 pieces of 19-29mm, 10 pieces of 21-38mm and 10 pieces of 21-44mm. Comprehensive size specifications to meet your various needs.
  • Wide Application: The hose clamp kit has a very wide range of applications, and can be used to fix hoses, pipes, cables, pipes, fuel pipes, etc..
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

Piutouyar 50 Pack 12MM Two Hole Strap U Bracket 304 Stainless Steel Rigid Pipe Strap Clamp Heavy Duty Tube Strap Tension Clip (1/2 Inch)

  • 【SIZE】- Fit Pipe Diameter: 60mm/ 2.36".
  • Total Size: 107 x 18 x 60mm / 4.21" x 0.71" x 2.36" (L*W*H).
  • 【MATERIAL】- Made of 304 stainless steel, strong rust and corrosion resistant for a long time use.
  • 【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
  • 【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
  • 【PACKAGE CONTENT】- 5Pcs × Rigid Pipe Strap.
Check Stock