Best Clamp on Temperature Probe

Fieldpiece SC680 - Wireless Power Clamp Meter

  • Mid-size clamp meter has every parameter for electrical and thermal HVACR testing in one meter.
  • One of the most durable clamp meters in the industry that gives higher accuracy VAC & AAC readings on VFD with True RMS sensing technology.
  • Ranges include temperature, capacitance, microamps DC for flame diode tests, and everyday electrical ranges for HVACR.
  • Auto and manual ranger with safety features including a high-voltage LED and beeper, a continuity warning, push button non-contact voltage (NCV).
  • Detachable leads and alligator probe tips for safe and easy one-handed testing.
Check Stock

Inrush Current Clamp Multimeter, BTMETER BT-570N TRMS 5999 Display Clamp-on Amp Meter for AC/DC Voltage Amperage Ohm Temperature Test

  • ✅TRUE RMS CLAMP ON MULTIMETER - 6000 Counts accurately measures AC DC current to 1000A , voltage , resistance, capacitance, frequency, duty cycle. Even more testing on Temperature (℃/℉), Inrush Current, Continuity test with buzzer, Diode test..
  • ✅BOTH AC/DC CLAMP-ON AMMETER - High resulotion, True RMS allows you get accurate measurement regardless of waveforms. Relative mode for Capacitance, DC Inrush, Zero out for lower amps measurement, data hold, max/min, auto power off, polarity and low battery indicator..
  • ✅SAFE AND EASY TO USE - Overload protection on all ranges. Use this clamp amp meter for unidentified wire testing, Contactless amperemeter test for amperage, Avoid electric shock without touching any wires..
  • ✅HIGH ACCURACY AMPERAGE METER - 0.1 amp resolution for AC DC Amps measurement for 200A, 1A amp resolution for 1000A. Ideal inrush clamp meter for troubleshoot electrical mechanical problem of cars motors boat HVAC household appliances safely and accurately..
  • ✅LARGE DIGITAL DISPLAY - Well built with backlit LCD for visibility in dimly light areas. Extensible t....
Check Stock

STEELMAN PRO 78752 Bluetooth ChassisEAR Lite Kit

  • NO WIRES - Bluetooth connected transmitter attaches to clamp or probe to wirelessly transmit data to a connected device.
  • COLOR CODED MODULE - Kit includes a single vibration and noise sensor clamp and Bluetooth transmitter module with a color coded silicone rubber boot.
  • STETHOSCOPE PROBE - Aluminum probe works with the Bluetooth transmitter as an electronic stethoscope for hands-on diagnostics.
  • USB BLUETOOTH DONGLE - Includes a USB Bluetooth dongle for use with laptop PCs that do not have built-in Bluetooth capability.
  • EARBUD HEADPHONES - Earbud style headphones plug into 3.5mm audio jack on smart device.
Check Stock

Simple Deluxe PTCLAMCR150MCTRL 150W Reptile Heat Bulb & 150W Clamp Light with 8.5\ Reflector & Digital Thermostat Controller Combo Set, Black, Heat Lamp+Clamp Light+Thermostat

  • Multifunction: great for reptile and amphibian terrariums, incubating poultry heater.
  • Perfect 24h heat source: heat bulb does not emit any visually detectable light, would not disturb pets sleep. 150W, E26 lamp base. Material: ceramic, NiCrAl. To avoid scald, please wait at least 1 hour to cool down after turning off the bulb..
  • Multifunctional clamp light: scratch-resistant sleeves covered clamp would not leave marks on your surfaces, 360° adjustment and 8.5inch aluminum reflector can focus light where you need. Volt: 120V, Watt: 150W (E26). have convenient on/off button..
  • Temperature range: digital thermostat provides temperature control between 40-108℉, temperature display range: 32-140°F. Support Celsius or Fahrenheit readout. Volt: 120V 60Hz.
  • Max Loading: 8A 1000W. Do not immerse controller or probe into water..
  • Package include: 1-pack 150W ceramic heat bulb, 1-pack digital thermostat (easy plug-in operation with LED illuminated indicator lights and three-prong grounded plug), 1-pack clamp light with 8.5 inch reflector..
Check Stock

Simple Deluxe 150W Reptile Heat Bulb and 8.5 inch Clamp Light, 40-108℉ Digital Thermostat Controller and Thermometer Included, for Amphibian Pet & Incubating Chicken, Silver

  • Perfect 24h heat source: heat bulb does not emit any visually detectable light, would not disturb pets sleep. 150W, E26 lamp base. Material: ceramic, NiCrAl. To avoid scald, please wait at least 1 hour to cool down after turning off the bulb..
  • Multifunctional clamp light: scratch-resistant sleeves covered clamp would not leave marks on your surfaces, 360° adjustment and 8.5inch aluminum reflector can focus light where you need. Volt: 120V, Watt: 150W (E26). have convenient on/off button..
  • Multifunction: great for reptile and amphibian terrariums, incubating poultry heater.
  • Temperature range: digital thermostat provides temperature control between 40-108℉, temperature display range: 32-140°F. Support Celsius or Fahrenheit readout. Volt: 120V 60Hz.
  • Max Loading: 8A 1000W. Do not immerse controller or probe into water..
  • Package include: 1-pack 150W ceramic heat bulb, 1-pack digital thermostat (easy plug-in operation with LED illuminated indicator lights and three-prong grounded plug), 1-pack clamp light with 8.5 inch reflector, 1-pack thermometer..
Check Stock

OWON Current Clamp Meter Multimeter CP-05+ Clamp Current Probe 200KHz 400A for Oscilloscope 4A 40A 200A 200-400A Test Range with BNC Connector

  • ¡¾High Performance¡¿The current clamp can take accurate current readings .The current clamps are the ideal tools to extend the current ranges of Oscilloscope tools.Support Auto zero at power on, relative zero correction function.It has Band wide up to 200KHz,support low battery indication .Adopt of amorphous alloy core, with high performance, low loss ..
  • ¡¾BNC connector¡¿The current clamp Multimeter features a BNC connector and can be plugged directly use. After connected well, switch the current clamp on (power LED should light) and then clamp the jaws around the current carrying conductor as shown. Typical Uses The AC/DC Current Probe simply offers the best value for money without compromising resolution..
  • ¡¾Multiple Test Ranges¡¿The OWON CP-05+ current clamp is ideal for use with automotive oscilloscopes for measuring currents between 1 mA and 400 A. Various current test range, 4A, 40A, 200A, 200-400A test range are available.Low noise level, and high detection accuracy..
  • ¡¾Easy to Use¡¿The current clamp has range selection settings, set by a slider switch on the handle of the probe. In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No ele....
Check Stock

Pipe Clamp K-Type Thermocouple Probe, Measures temperature range -40 to 392 °F(-40 to 200 °C), Yellow, Hti-Xintai

  • This probe is able to maximum measure surfaces up to 200°C (390°F)..
  • Spring-loaded jaw for secure grip on pipes from 0.25" (6.35mm) to 1-3/8" (up to 3.5 cm) diameter..
  • The cable extends 38" (98cm) from the handle to the thermocouple connector with the meter..
  • Works with any Multimeter, Clamp Meter, and a Thermometer that accept a type K temperature probe..
  • Reliable measurements for HVAC and environmental testing..
Check Stock

4 Pieces Thermometer Probe Clip Thermometer Probe Clip Holder Stainless Steel Thermometer Probe Holder Mutifunctional Probe Clip BBQ Grill Probe Clip for Temperature Reading Silver

  • Made of quality stainless steel, not easy to rust and deform, durable..
  • Easy to use and clean, when inserting the temperature probe, just squeeze the middle of the clamp..
  • It can keep your thermometer probe stable and level for accurate temperature readings. Fit for thermometer probes with a diameter of 4 mm..
  • Suitable for ovens, grills, BBQ, coffee pot,fryer, smokers, etc..
Check Stock

Autel MaxiSys MSOAK Oscilloscope Accessory: Work with MaxiFlash VCMI MSUltra MS919 & MP408, 65A&650A AC/DC Current Clamp, Coil On Plug Probe Included with Carrying Case Accessory Kit

  • 【Autel MaxiSys MSOAK for MSULTRA, MS919 & MP408】Autel MaxiSys MSOAK, compatible with the MaxiFlash VCMI included with the MSUltra and MS919, and the MP408 4-channel oscilloscope (sold separately), includes the 65A AC/DC Current Clamp, 650A AC/DC Current Clamp, Coil On Plug Probe, HT Extension Lead (2pcs) and Battery Clip (2pcs), within a blow-molded carrying case. To enable screen reader support, press Ctrl+Alt+Z To learn about keyboard shortcuts, press Ctrl+slash.
  • 【Autel MaxiSys MSOAK for MSULTRA, MS919 & MP408】 Includes 65A AC/DC Current Clamp, 650A AC/DC Current Clamp, Coil on Plug Probe, HT Extension Lead (2pcs) and Battery Clip (2pcs).
  • 【Autel MaxiSys MSOAK for MSULTRA, MS919 & MP408】The current clamp measures a maximum current of 65A with a frequency up to 20 KHz. It works with jaws that open to allow clamping around an electrical conductor. And the 650A AC/DC current clamp measures a maximum current of 650A with a frequency up to 400 KHz..
  • 【Autel MaxiSys MSOAK for MSULTRA, MS919 & MP408】COP Probe can catch the ignition waveform of automobile engine easily. The ignition waveform is a window, through which we can see what happened in the engine combustion chambers. It determines whether the ignition plug needs to be replaced or clea....
Check Stock