Best Chemical Injector For Pressure Washer

Raincovo Downstream Injector for Pressure Washer Power Washer Chemical Injector Kit Soap Injector 3/8 Inch Quick Connect 4000 PSI

Package: Kit Includes chemical injector, 10 feet siphon hose, filter, black nozzle soap with 1/4” quick connect and teflon tape..
Application: When detergent is sucked out separately, the chemical will not pass through the pump, you could use a variety of chemicals without....
Characteristic: Chemical injector kit with a metering valve, which can adjust dilution ratio of soap and water. Avoid clogging of the injector and....
Connector: Downstream Injector has 3/8 inch quick connect. Fits most electric and gas power washer..
Material: Siphon hose is made of high-quality PVC, used for hot and cold water. Adapter is made of brass and stainless steel. Max pressure is 4000....

Pressure washer chemical injector tubing kit includes 10 feet replacement tubing, two filters. The tubing can adjust and cut based on your needs..
ATTENTION: Siphon Hose: Inside Diameter: 7.0 mm.
Application: Used to siphon detergent out of separate container. It allows for a wider choice of chemicals..
The filter can avoid contaminants enter the pressure washer hose, pump or gun..
Works with most brands of gas and electric pressure washer..

2800 psi 2.5 gpm Universal Power Pressure Washer Water Pump 308653052 for Homelite.
Specs - Maximum Pressure: 2800 PSI. Maximum Flow: 2.3 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Shaft. 3 Bolt Pattern: 7 11/16” x 6....
Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube.
This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine). Pump needs at least 5.5HP to handle PSI.....
This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine....

The ROP Shop replacement Horizontal Triplex Pressure Washer Pump.
Specs - Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM. Maximum HP: 6.5 HP, Male Outlet: 22mm Threaded, Standard....
Includes - (1) Horizontal Triplex Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Oil Reader.
This pump mounts horizontal and MUST have the oil dip stick pointing up when mounted. Pump needs at least 6.5HP to handle PSI. Pump head CANNOT be....
Replaces most pumps with 3/4" shaft. The 4-bolt mounting pattern is 2 9/16" center to center.

Pressure Washer Manifold Kit 16031 190627GS 190574GS.
Kit Includes: Chemical Injector, Inlet Check Valve, 4 Mounting Bolts, and 4 Mounting O-Rings.
To fit model number 020228 -- Please be sure to mount it in the proper direction. If it is mounted backwards, it will blow the casting apart as soon as the engine starts, right where the unloader valve comes out of the manifold..
Excell Pressure washer model EXWGV1721 -- It includes a shorter extension but if you like, you can remove the short one and install the longer one that is on the manifold.
Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..

The ROP Shop replacement 7/8″ Shaft, Aluminum Head, Vertical Pump for Pressure Washer with 2800 PSI and 2.3 GPM.
Specs – Maximum Pressure: 2800 PSI, Maximum Flow: 2.3 GPM, Male Outlet: 22mm Threaded, Standard Garden Hose Inlet, 7/8″ Vertical Shaft. Refer to images 2 & 3 for more information.
Includes – (1) Pump, (1) Keyway & (1) Thermal Release Valve.
Pump comes with built in Unloader & Chemical Injector.
When installing, please ensure that the keyway is installed before running your pressure washer.

The ROP Shop replacement 3/4″ Shaft, Horizontal Triplex Pump for Pressure Washer with 3600 PSI and 2.5 GPM.
Specs – Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM, 6.5 HP, Male Outlet: 22mm Threaded, Standard Garden Hose Inlet, 3/4″ Horizontal Shaft. Refer to images 2 and 3 for more information.
Pump comes with built in Unloader, Chemical Injector, Thermal Release Valve, & Oil Sight Glass.
When installing, please ensure that the keyway is in place before running your pressure washer.

... 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".

Pressure Washer Manifold Kit 16031 190627GS 190574GS.
Kit Includes: Chemical Injector, Inlet Check Valve, 4 Mounting Bolts, and 4 Mounting O-Rings.
To fit model number 020228 -- Please be sure to mount it in the proper direction. If it is mounted backwards, it will blow the casting apart as soon as the engine starts, right where the unloader valve comes out of the manifold..
Excell Pressure washer model EXWGV1721 -- It includes a shorter extension but if you like, you can remove the short one and install the longer one that is on the OEM manifold.
Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..