Best Check Discharge

Zoeller 284-0004 Non-Automatic Cast Iron Single Phase Submersible Sewage/Effluent Pump

  • Pumps up to 4800 gallons per hour,, pumps water up to 25 vertical feet.
  • 1/2 HP Cast Iron Sewage Pump with Vertical Float Switch.
  • 19 in. x 30 in. 30 gallon structural foam basin, 4 In. rubber inlet hub fits DWV schedule 40/80 pip, 2 In. discharge and vent, built-in torque stops.
  • Premium structural foam cover with 8 bolt configuration, air tight molded reusable PVC seal.
  • Check valve features, heavy duty rubber boots, stainless steel clamps, full flow design, 2 in. connections.
Check Stock

LiPo RC Battery GOLDBAT 5200mAh 2S 7.4V 50C LiPo Battery Pack with Hard Case Deans Plug for RC Evader BX Car Truck Truggy Buggy

  • 【Specification】- Battery voltage: 7.4V.
  • 【Notice】- Suggest use 0.5C-1C. Check carefully the battery condition before using or charging. Don’t over charge more than 4.2V and don’t over discharge below 3.2V. Stop charging once the battery is fully charged. Do not charge the battery unattended..
  • 【Application】- Specially designed for 1/8 and 1/10 rc car, Losi, HPI Strada XB 1/10 RTR Electric Buggy, Team Associated, Axial, Tamiya, Duratrax, Jammin, Redcat Racing, Exceed RC, ElectrixRC, Emaxx, Bandit, Rustler version. (Only if the voltage, dimension and the plug match, then it will fit)..
  • 【High Performance】- Fast charge capability 1C-3C, highly suggest 1C. Long Cycle Life, up to 200Wh/kg energy density.
Check Stock

GOLDBAT 5000mAh 2S 7.4V 60C Shorty Hardcase LiPo Battery Pack with 4.0mm Bullet Deans Connector for RC 1/10 Scale Vehicles Car Trucks Truggy Boat Racing

  • 【High Performance】- Fast charge capability 1C-3C, highly suggest 1C. Long Cycle Life, up to 200Wh/kg energy density.
  • 【Specification】- Dimension: 3.7*1.77*0.98 inches.
  • 【Notice】- Suggest use 0.5C-1C. Check carefully the battery condition before using or charging. Don't over charge more than 4.2V and don’t over discharge below 3.2V. Stop charging once the battery is fully charged. Do not charge the battery unattended..
  • 【Application】- Fits models like 1/10 Scale Vehicles, especially those in need of shorty battery dimensions. (Only if the voltage, dimension and the plug match, then it will fit)..
  • 【AFTER-SALES】- Please contact us immediately if you have any problems, we will reply you within 24 hours..
Check Stock

Hanchen Liquid Filling Machine Automatic Bottle Filler 1-135 Fl Oz Digital Liquid Filler Cosmetic Oil Filling Machine for MCT Oil, Milk, Water, Juice, Essential Oil with 2 Heads Diaphragm Pump

  • ... filling equipment for small batch production in cosmetics, beverage, daily chemical, and other industries. It is suitable for thin (water-like or oil-like), particle-free, non-corrosive liquid, such as cosmetic oil, beer, beverage, essential oil, MCT oil, 45% alcohol, water, glass detergent, etc..
  • [SUS304 ANTI-DRIP DISCHARGE NOZZLE] Unlike plastic discharge nozzle used by other vendors, we adopts SUS304 material to make a long hollow discharge nozzle. 4mm and 6mm nozzles are included in the package, for bottles/pouches with different openings. Equipped with an check valve, nozzle ensures a stable filling process too..
  • [ONE-KEY TO CLEAN] No need to disassemble the filling machine. Only one key operation is required! Put mesh filter into clean water or detergent, press and hold “INCHING” to quickly and easily clean the whole tubing of the machine. In addition, mesh filters, check valves, and filling nozzles can be disassembled..
Check Stock

LiPo Battery 5200mAh 2S 50C 7.4V GOLDBAT RC Battery Hard Case with Deans Plug for RC Evader BX Car Losi Buggy Team Associated Truck Truggy (2 Packs)

  • 【Specification】- Battery voltage: 7.4V.
  • 【Parameter】- Dimension: 5.47*1.85*1.02 inches.
  • 【Notice】- Suggest use 0.5C-1C. Check carefully the battery condition before using or charging. Don’t over charge more than 4.2V and don’t over discharge below 3.2V. Stop charging once the battery is fully charged. Do not charge the battery unattended..
  • 【Application】:Fits models like 1/8 and 1/10 rc car, Losi, Slash, HPI Strada XB 1/10 RTR Electric Buggy, Team Associated, Axial, Duratrax, Jammin, Redcat Racing, Exceed RC, ElectrixRC, Emaxx, Bandit, Rustler version (Only if the voltage, dimension and the plug match, then it will fit)..
  • 【AFTER-SALES】- Please contact us immediately if you have any problems, we will reply you within 24 hours..
Check Stock

GOLDBAT 4S 1500mAh 100C 14.8V LiPo Battery Pack with XT60 Plug for Heli Airplane Drone FPV Racing (2 Packs)

  • 【HIGH QUALITY】- Durable and powerful energy, discharge high voltage instantly, long cycle life, up to 200Wh/kg energy density..
  • 【Application】- Skylark m4-fpv250, Mini Shredder 200, Indy250 plus mojo 280, Qav250, Vortex and Emax nighthawk 250, Nemesis 240 Mini, HOVERSHIP MHQ2 (270), ZMR 250, Mini H, QAV250, QAV180/210, Danaus, Vortex 285, FLIP FPV FRAME, HOVERSHIP MHQ2, etc.. (Only if the voltage, dimension and the plug match, then it will fit)..
  • 【NOTE】- Built-in protection mechanism ensures safe charging and use. Never leave battery unattended when charging. Don't overcharge more than 4.2V and don’t over discharge below 3.2V. Check carefully the battery condition before using or charging. Don't over charge more than 4.2V and don’t over discharge below 3.2V. Stop charging once the battery is fully charged. Do not charge the battery unattended..
  • 【AFTER-SALES】- Please contact us immediately if you have any problems, we will reply you within 24 hours..
Check Stock

3.7 Volt 4000mAh Rechargeable Battery with Wire and JST Connector

  • 【CELL SPECIFICATIONS】 4000mAh 3.7V rechargeable type. Note: Please charge it In order to avoid a dead battery when using it for the first time.
  • 【WIDE APPLICATION】:This 3.7V 4000mAh rechargeable battery can be used in battery-powered equipment, such as replacing rechargeable battery roller motors, mobile power supplies, solar generators, electric bicycles, power walls, etc..
  • 【HIGH PERFORMANCE】DIY Professional Battery Pack with the nominal voltage of each cell = 3.7 V. High continuous discharge rate, short circuit and over-current protective.
  • 【SAFETY ASSURANCE】:Temperature protection,Intelligent protection IC board,Stable Capability,Durable,A+ battery cell,Over charge protection,Over discharge protection,Short-circuit protection..
  • 【BATTERY SIZE】: Φ19mm*L:69mm. The connection length is 2.7 Inches. Please Check the battery size and connector type..
Check Stock

iMeshbean® Deep Well Submersible Pump,1 hp, 115V, 60 Hz, 33 GPM, 207' Head, Stainless Steel, 4\

  • ★【Technical Specifications】4",1HP, 115V, 10.2 Amps , 60 Hz,1-1/4” NPT discharge. 8 Impellers;Fits in a 4" casing..
  • ★【Economy & Effective】33GPM max & 207ft head;33′ lengthy electric cord -allows for easy connection,.
  • ★【Outstanding Performance】Stainless steel body& thermoplastic impellers -industrial grade heavy duty - guarantees high durability and long-lasting use.
  • ★【Widely Application】 Perfectly convenient for use at home and for factory usage.
  • can be implemented in different types of wells-ash pipe wells, steel pipe wells, or soil wells;Can be used for extracting water from reservoirs, canals, rivers, open water tanks and other water lifting works.
  • ★【 Built-in Controlbox & Check Valve】This item is with a built-in control box, it is for thermal protection, short-cut protection and overload protection;★【NOTICE】This pump has a built in check valve. However installing additional check valve is recommended.
Check Stock

Grundfos 10SQ10-290 96160143 3\ Submersible Water Well Pump and Motor 10GPM 1HP 200-240V

  • ...er control box, provides large flow and high head. It can move water up to 2166GPH or lift water up to 207ft. Designed for 4'' or larger deep well. This submersible well pump is perfect for domestic water boosting, irrigation and Industrial grade heavy duty.
  • Durable & Compact: Qulity stainless steel pump housing and discharge ensures corrosion and abrasion resistance. Durable impellers provide high efficiency and stable performance. Stainless steel inlet strainer screen filters out debris to prevent clogging. Please add a layer of gauze in front of the filtration inlet for a newly drilled well that may contain excessive granular sediment.
  • Easy Installation: Premium mechanical seal prevents water leakage effectively and provides long service life for this irrigation pump. It's compatible with a pressure tank and pressure switch (both not included) and can work as a pressure booster pump. Rustproof 1-1/4" NPT discharge with built-in check valve is easy to install and maintain. Please install extra check valves at outlet pipe to prevent flowback.
  • Safe Operation: Thermally protected motor will prevent the pump from overheating and burning. 10ft copper power cord comes with splice kit for easy and secure connection. This deep well pump has a small footprint ....
Check Stock