Best Cheap Red Dot Pistol Sight

Ade Advanced Optics NUWA (RD3-021) Micro Red Dot Sight for Canik TP9 Elite SC, Canik Mete SFT, Sig Sauer 365XL, Ruger Max9 and Springfield Hellcat OSP/PRO

  • ..., Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens..
  • ADE NUWA is the first(and the only)red dot with RMS/RMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting. 2MOA Red Dot. Weight approximately 15.5 grames(0.55oz), (Length)1.5" x (Width)..88" x (Height).89".
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun..
  • Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols,....
Check Stock

SAWKE Glock Sight Mount Plate - Glock 17 19 22 23 26 27 34 Mounting Plate Mini Red Dot Sight,Glock Mount Plate Red dot Burris Sightmark Vortex

  • CAUTION: Not fit for RMR, RMS, DOCTOR and Glock m.o.s. system. NOT fit Glock 19 mos..
  • Glock red dot base plate fits Glock 17 19 22 23 26 27 31 34 35..
  • This glock red dot mount fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight..
  • Fits Vortex/Viper/Venom, Burris Fastfire micro red dot sight..
  • Attaches firmly to your pistol for excellent performance in tactical situations Replace the rear sight slot with mini red dot base plate..
Check Stock

Pinty Pro 3.5 MOA Red Dot Sight with Built-in Picatinny Weaver Rail Mini Red Dot Reflex Sight w Multicoated Lenses

  • RED DOT SIGHT: This little reflex sight by Pinty offers a red dot reticle with 4 daytime intensities and a night mode of 2 settings (dusk and night)....
  • USER-FRIENDLY DESIGN: It takes only a few quick presses to help you find the optimum light among all brightness settings.
  • BUILT TO LAST: This pistol and rifle sight's anodized aluminum construction resists shock, wear, tear, and corrosion at a lightweight 2.5 ounces.
  • WIDE APPLICATION: Our red dot sight's 3.5 MOA dot size and 3' parallax ensure accurate and efficient close and midrange targeting ideal for home....
  • SATISFACTION GUARANTEED: Pinty backs this firearm accessory with our usual strong warranty and friendly 24/7 customer service, ensuring that you'll....
Check Stock

Picatinny Rail Mount plate for Glock 17 19 22 Taurus G3C-Work with All railed red dot such as Vortex Venom, Doctor, Trijicon RMR, comes with builtin screw hole for Sig Romeo Zero, Holosun 407k/507k

  • ...aces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply “plug and play”. We recommend having a qualified gunsmith to install.
  • This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE:....
Check Stock

Mirco Red Dot Reflex Sight, Mini Dot Sights, 3 MOA, 7 Brightness with Picatinny Mounts,Compatible with MOS Adapter Plates for G17/G19/22/23/26/34/35/37/41,Reflex Optics Scope for Outdoors

  • MICRO RED DOT REFLEX SIGHT: It comes with 2 picatin ny mounts so it is also compatible with varies handgun mounting plates MOS system. It is also compatible to optics-ready pistols such as G L o ck G17/19/22/23/26/27/34/35/37/41. Pistol rear sight replace mount plate compatible with Trijicon RMR VISM red dot sight..
  • WATERPROOF / SHOCKPROOF RED DOT OPTICS: Stealthy, scratch resistant matte anodized finish.Unlimited Eye Relief. Powered by a CR2032 battery (2 batteries Included)..
  • COMPACT REFLEX SIGHT: 7 levels of brightness, automatic brightness sensor adjusts brightness to match the different conditions..
  • DIMENSIONS: 1.7″ L x 1″ W x 1″ D with a weight of .65 ounces. Light weighted to use..
  • 3 MOA HIGH ACCURACY: Sight features a clear 3 MOA red dot reticle for easy target acquisition..
Check Stock

Kingslayer

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

Red Dot Sight，4 MOA Reflex Sight，Multi Coated/Adjustable Brightness Red Dot Scope，Pistol red dot Sight for Day & Night Time，Rifle Scope with Glock Mount Plate and Picatiinny Rail Mounts

  • 【Red dot sight】This little reflex sight by inxaric offers 6 levels of brightness to work in bright and dim lighting with equal ease.
  • 【User-friendly design】Inxaric red dot scope was designed to be easy to install, fully adjust the dot, windage & elevation quickly ，Can be easily....
  • 【High-quality mirco red dot sight】This pistol and rifle sight's anodized aircraft aluminum construction，O-ring sealed，resists shock, wear,....
  • 【Built to Last and Complete accessories】the shockproof reflex Sight has been tested for 1000 rounds on all types of guns without losing....
  • ✔【Satisfaction guaranteed】--Including glok plate and Picatinny rail mounts, suitable for glocks and product with Picatinny rails，If there is....
Check Stock

Kingslayer [Blu-ray]

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

Twod Laser Sight Red Dot Quick Release Picatinny Mount w/Remote Pressure Switch

  • Quick Detachable Mount: Twod Laser Sight can be easily and quickly mounted on a Weaver or Picatinny style rail with the knob. It fits most full and mid-size pistol rails..
  • Additional Remote Pressure Switch: This Upgraded Sight includes a remote pressure Switch with a mini jack that plugs into the side jack port. Lasers can be activated by side button or from the Remote Pressure Switch..
  • Low-profile Laser Sight: Twod Red Dot Laser delivers precision aiming for your pistol for unbeatable accuracy. It makes your handgun more tactical and more accurate with this setup..
  • Adjustable Windage / Elevation: Two allen head screws provide easy adjustment of windage and elevation for the laser beam, making zeroing in your gun simple..
  • Tactical Compact Low Profile Pistol Red Laser Sight – Weaver/Picatinny Rail is the perfect accessory for home defense or sport shooting to give you pinpoint accuracy with your shot, and the confidence to perform your best in any situation..
Check Stock