Best Chamfering Beveling

KOPO KP-5702 Manual Chamfering Machine Mini Portable Linear Pneumatic Tool Hand-Held 45 Degree Light Weight Elbow

  • This 45-degree chamfering machine has a new lightweight design, small and exquisite, and can be easily operated with one hand. Use the matching wrench to easily adjust the chamfer size and replace the blade..
  • Pneumatic chamfering machine is made of high-quality imported accessories, chamfering Machine keeps accuracy assembly with stable performance for long life..
  • It can withstand high impact and high speed, with little vibration, low resistance and lower loss. The speed is increased and the chamfer is smoother, and the machine is more durable..
  • Equipped with a 360-degree rotating exhaust port, which can quickly exhaust and reduce the temperature of the machine..
  • Pneumatic chamfering machine is entitled with high performance according to strict rule, such a power tool is made via accuracy craft by many experts..
Check Stock

Fafeicy Carbide Chamfer End Mill, 3 Flute 60° Milling Cutter V Groove Router Bit Tungsten Steel CNC Carving Polishing Router Bit, for Plywood, Soft Wood(D4*60°*50L), Milling Cutter

  • The chamfering mill is mainly used for the 60 ° chamfer or conical hole of the workpiece, and the edges and angles of each surface are champened..
  • This hard alloy chamfered milling cutter unique single-piece design makes debris generated during the cutting process without clogging the tool..
  • The chamfering cutter is of standard size and can be used as aluminum-copper milling tool and engraving milling cutter bit..
  • This hard alloy chamfering cutter uses 3 flute design to complete the processing of tapered surfaces at a time, suitable for small cutting processing..
  • This chamfering cutter has a wide range of applications, suitable for hardwood, plywood, cork, oak, MDF and metal in HRC 55..
Check Stock

OWDEN 3Pcs Leathercraft Modeling Tools 3Pcs Sizes S,M,L Leather Carving Modeling Tools kit.

  • OWDEN Brand 3Pcs. modeling tools kit with a red PVC pouch..
  • There are 6 worktips in 3 different size tools (S,M,L).
  • The small size tool (point and stylus) to draw beautiful and smooth lines on the leather..
  • The medium size tool (medium and large points spoon) for figure carving and to smooth beveling marks..
  • The large size tool (Medium and large round spoon) for figure carving and to smooth beveling marks..
Check Stock

Chamfer End Mill 3 Flute Chamfering Router Bit 90° Tungsten Steel CNC Polishing Carving Tool for Small Cutting Amount(D3*90°*50L)

  • 3 FLUTES: The chamfering knife is designed with 3 flutes, which can complete the operation of conical surface at one time, and is suitable for small cutting amount..
  • ONE-PIECE DESIGN: The unique one-piece design makes the debris generated during the cutting process easier to fall without clogging the tool..
  • EASY TO USE: The milling cutter bit dopts professional chamfer design, which can polish and engrave the workpiece without unloading..
  • STANDARD SIZE: The end mill chamfer bit has standard size and can be used as an aluminum‑copper milling cutter tool and an engraving milling cutter head..
  • APPLICATION: The chamfering tool is compact design, easy to carry and store, mainly used for 90° chamfering or taper hole processing on the workpiece..
Check Stock

RIMKOLO 107-Piece Bit Socket Set,1/4

  • DURABLE S2 Material: The bit socket is made of S2 alloy steel, which is strong and has good toughness, not easy to break.The chamfering design of the head increases the contact area, not easy to wear,more durable..
  • HEAT TREATMENT CR-V: The socket base is made of chrome vanadium steel with stronger hardness after heat treated and provides higher torque.The surface is mirror chrome plated,and the E-Torx Sockets with manganese phosphate coating are more anti-corrosive and anti-rust than Black oxide coating, extending the service life..
  • CHAMFERING DESIGN: Each bits head has a unique chamfering design, which makes it easier to insert the bit head into the fastener. And increase the contact area with the fastener, reduce wear, protect the fastener.Complies with ANSI standards..
  • COMPLETE ACCESSORIES: 107PCS high quality bit socket set,including 1/4", 3/8" and 1/2"drive Torx / extra long Torx / tamper proof Torx/hex / ball end hex SAE & metric bit set. Complete accessories to meet your needs..
  • EASY TO IDENTIFYWith a storage toolbox, easy to carry. Specifications are clearly printed on the tool box and socket, which is convenient for identification and sorting, saving you time..
Check Stock

TAOZUA Guitar Fret Beveling File for Fret End Dressing Hard Merbau Made Guitar Fret Crowning End Bevel File 35/90 Degree Luthier File Too

  • 『Material Upgrade』Made of high-quality merbau wood, this guitar file is lighter and more artistic than other acrylic products on the market..
  • 『Humanized design』The notch design on both sides of the tool is easy to grasp and does not hurt hands when using this tool..
  • 『90 Degree』90-degree right-angle file for initial smoothing and flush-filing..
  • 『35 degree』35-degree angled bevel file for perfectly beveling fret ends before final dressing..
  • 『Double-Cut Design』 Double-cut mill file for fast material removal, Larger size good for beveling the entire neck at once.....
Check Stock

DEWALT 7-1/4-Inch Circular Saw with Electric Brake, 15-Amp, Corded (DWE575SB) , Yellow

  • DEWALT 7 1/4 circular saw is among the lightest saws in its class (8.8 lbs.).
  • Electric brake of the corded circular saw stops the blade after trigger is released.
  • 15 amp motor of the compact circular saw delivers power for even the toughest applications.
  • 57degree beveling capacity with stops at 45 degree and 22.5 degree.
  • Ball bearing lower guard provides long life in harsh environments.
  • Durable high grade Aluminum smooth base for accurate cuts.
  • Lower guard design improves performance when making bevel cuts and cutting shims.
  • An integrated dust blower allows the user to clear its line of sight while cutting.
  • Patented Tough cord protection system, provides 3x durability against cord pull-out.
  • 57-Degree beveling capacity with positive stops at 45-Degree and 22.5-Degree.
Check Stock

Pipe and Tubing Inner-Outer Reamer 5/16-Inch to 2-1/8-Inch Diameter Stainless Steel/PVC Pipe Chamfer Anti-Slip Aluminum Alloy Shell Deburring Tool

  • STAINLESS STEEL TUBE REAMER: trimming, chamfering and deburring the outer wall.
  • trimming, chamfering and deburring the inner wall. At the same time, the outer wall is made of aluminum alloy with anti-skid pattern..
  • APPLICABLE OBJECTS: refrigeration copper pipes, stainless steel pipes, plumbing bellows, gasoline pipelines (aluminum pipes), galvanized pipes for water engineering, etc..
  • INNER/OUTER BLADE: Multi-blade alloy steel core design, triangular scraper-the triangular support of the blade is more powerful, convenient and fast..
  • MACHINABLE RANGE: 8-54mm (5/16"-2 1/8") inner diameter/outer diameter can be used, most household pipe diameters are covered, a reamer can solve all deburring and chamfering..
  • USAGE: Rotate and cut directly by hand, or use an electric drill with an adapter for processing..
Check Stock

LOYALHEARTDY Mini Electric Table Saw Tablesaw 8000RPM, Portable Electric Precision Table Saw Woodworking DIY Bench Saw with 60mm HSS Saw Blade

  • 【Precise Cutting】 Aluminum alloy panel design, accurate scale, durable and not deformed, ensuring flatness and high quality of cutting.
  • 【Portable】 Small size, easy to carry, transparent protection, acrylic board, you can see the entire production process, very suitable for DIY model makers.
  • 【Low Noise】 The maximum speed of the motor can reach 8000RPM, the cutting force is super strong, the noise is low, and it can be used at home..
  • 【Safety】 The cutting table is equipped with a ruler and a baffle to meet your precise cutting needs and safety.
  • 【Applications】 Used for tearing, cross-cutting, beveling, beveling and non-penetrating cutting of wood, plastic and other soft materials.
Check Stock