Best Chamfer Boring Bar

Oregon 90PX100U AdvanceCut Saw Chain, 100' Reel

• Oregon 90PX100U 3/8" Low Profile .043" Gauge Saw Chain - 100' Reel.
• Narrow .043" gauge helps reduce the weight of the bar-chain combination approximately 15%.
• Always install 90PX chains on a .043" gauge Double Guard bar (MLE part numbers) to obtain all the advantages of the Micro-Lite system.
• Low-vibration chamfer chisel cutters have an angular shape with twin cutting corners for excellent performance and edge-holding durability.
• Recommended Bar Lengths: Up to 16in. (40cm) Recommended Saw Sizes: Up to 42cc.

ASZLBYM 5/8'' x 7'' Carbide Indexable Boring Bar Turning Tool Holder S16Q-MCLNR12 with 10pcs CNMG431 / CNMG120404 Indexable Carbide Turning Inserts

• ★S16Q-MCLNR12 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction：right hand..
• ★CNMG431 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts..
• ★The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
• ★Package : 1pc S16Q-MCLNR12 boring bar + 10pcs CNMG431 carbide insert + 1pcs wrench.

ASZLBYM 5/8'' x 7'' Carbide Indexable Boring Bar Turning Tool Holder S16Q-MTJNR16 with 10pcs TNMG331 / TNMG160404 Indexable Carbide Turning Inserts

• ★S16Q-MTJLNR16 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction：right hand..
• ★TNMG331 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts..
• ★The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
• ★Package : 1pc S16Q-MTJLNR16 boring bar + 10pcs TNMG331 carbide insert + 2pcs wrench.

2\ Boring Head SET 9 Pcs Carbide Boring Bars with R8 Shank 1/2'' Mill

4\ BORING HEAD SET 6 PCs CARBIDE BORING BAR WITH R8 SHANK 4 INCH BORING 1'' MILL

HGC BT30 Tightening Fixture CNC Tool Holder Tapers For BT30 Machine Tool Handle

• For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
• Heavy Duty Boring Bar Holder to holds 3/4" tool with bushing, 1" diameter without bushing.
• Equipped with a split bushing to accommodate a boring bar of smaller diameter.
• Precision ground and hardened. Completely sealed for maintenance free operation.

Accusize Industrial Tools 1/2 x 1/2 x 4 in. (Width by Height by Oal) Hss+5% M35 Cobalt Lathe Tool Bit, 5095-0032

• M35 Cobalt (HSS + 5%) square lathe tool bits blank, much harder and more durable than M2 high-speed steel lathe tool bits.
• Ground for heavy-duty cuts on casting and forgings. It has significantly higher wear resistance than M2 HSS。.
• You may machine it to turning tools to do any lathe turning operations. The possibilities are infinite..
• Step turning, taper turning, chamfer turning, contour turning, facing, grooving, parting, cut-off, internal threading, outside threading, boring, knurling, etc..

ASZLBYM SNR0013M16 CNC Lathe Internal Threading Boring Bar Turning Tool Holder With 10pcs 16IR AG60 Carbide turning insert

• ♥Package includes ：1PC SNR0013M16 boring bar + 11PCS 16IR AG60 carbide thrading turning insert + 1PC T15 wrench.
• ♥SNR0013M16 : overall length : 150mm=5.9inch , shank diameter : 13mm=0.51inch, cutting direction : internal thread right cutting.
• ♥ Thredaing boring bar : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
• ♥16IR AG60 carbide inserts : 16IR AG60 inserts are made of carbide and the coating material is TiN , processing pitch range : 0.5~3.0mm.
• ♥16IR AG60 carbide inserts Can be used for processing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..

Boring Head Set, Carbide Boring Bar MT2 -M10 F1-12 50mm Boring Head with 9pcs 12mm Boring Bars Milling Machine Accessories for Boring and CNC Milling Machine Tools

• SUITABLE FOR : The product is the main accessories of boring and CNC milling machine tools like coordinate boring machine, horizontal boring machine, ordinary boring..
• USED FOR : This tool set is made of high quality material, good wear resistance, and durable in use.It can be used for boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cut the hole and the outer ring groove and other processing..
• PACKAGE LIST : This tool set contains 1 x drawbar thread: MT2 M10*1.5 1-1/2"-18UNF,1 x F1-12 50mm boring head with 12mm hole accept ,9 x boring carbide tips with 12mm shank,3 x keys ,1 x plastic case.
• QUALITY ASSURANCE :100% brand new and the quality of our products is guaranteed.We supply fast and convenient return or replace service to insure purchasing without worries. If you have any questions about our products,please feel free to contact.