Best Ceramic Igniter

Round Gas Range Oven Ignitor for GE 41-208 ER4342528 SGR401 SGR400

  • Gas Igniter for Stove Range, Replacement Part No. SGR403.
  • SPECS:This igniter’s amperage range is 2.5 – 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long,one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included,This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4,Fits many different range manufactured including Whirlpool, Kenmore, Roper..
  • Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
  • ignitors are fragile and will break easily..
  • Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
  • Description:Use your wire cutters to cut the wires on the old ignito....
Check Stock

Gas Oven Bake & Broil Round Igniter for WB2X9154 4342528 Ignitor AP2014008, PS243425

  • Gas Igniter for Stove Range, Replacement Part No. SGR403.
  • SPECS:This igniter’s amperage range is 2.5 – 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long,one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included,This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4,Fits many different range manufactured including Whirlpool, Kenmore, Roper..
  • Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
  • ignitors are fragile and will break easily..
  • Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
  • Description:Use your wire cutters to cut the wires on the old ignito....
Check Stock

Exact Replacement Igniter for Samsung NX58H5600SS/AA-0000 NX58H5650WS/AA-0000 Range Oven

  • Gas Range Oven Igniter part number 41-230..
Check Stock

Snap Supply Range Igniter for GE Directly Replaces WB13K21

  • This Range Igniter Directly Replaces the following Part #’s: ERWB13K21, WB13T10045, WB13K14, WB13K13, WB13K12, WB13K10026, WB13K10009, WB13K0021, WB13K0014, WB13K0013, WB13K0012, AP3202322, 1085573, AH952863, EA952863, PS952863, AP2020569, 2494, AH231280, EA231280, PS231280.
  • Quality you can Trust! All Snap Products are made with premium materials and are tested so they last..
  • Buy with Confidence! Snap Supply Parts always come with a 1 Year Warranty..
  • Installation Instructions available on our website! Oven igniter assembly. Short ceramic style igniter with mounting bracket and wire nuts for installation. Amperage range is 3.3 to 3.6. *Connector may need to be cut off and wires spliced to range wiring with porcelain wire nuts..
  • Compatible with the following Range brands: General Electric, Kenmore, Hotpoint..
Check Stock

GASPRO 67847 Grill Igniter Kit Replacement for Weber Genesis E/S-310 Genesis 300 Series Side-Mounted Control Gas Grill 1819-51 Igniter

  • 【Works Perfectly】 Replacement for Weber Genesis 300 series (with side-mounted control), including E/S-310, 320, EP-310, 320, CEP-310, 320....
  • 【Durable & Long-Lasting】 Constructed from high-quality material for longevity.
  • 【Great Value】The igniter is as good as the original but half the price.
  • 【Easy to Install】With just a couple of screws to remove the old one and replace with this igniter kit. Can install within a few minutes.
  • 【Complete Set】 Includes igniter module, push button, white ceramic U-shaped sparking device (AAA battery is not included).
Check Stock

ATKKE 67847 Igniter Kit for Weber Genesis 300 Series with Side-Control Battery Ignition Starter Part 2008-2010 Gas Grill for Weber E/S-310 E/S-320 310 320 Series Grills Replacement

  • AN EFFECTIVE WAY TO RE-ACTIVE YOUR GAS GRILL - Nothing beats using a gas grill to make quick and delicious foods while the ignition system plays an....
  • FITS FOR WEBER 67847 GENESIS SERIES GAS GRILL - This igniter kit is designed to replace the tired, worn out ignition system in your Weber gas grill.....
  • PACKAGE INCLUDED - This igniter kit includes one white ceramic U-shaped spark device with electrodes and wires, one electronic igniter module and one....
  • HIGH QUALITY MATERIAL FOR DURABLE AND LONG-LASTING - This igniter kit is made of premium plastic, metal and ceramics. All the components are durable....
  • EASY TO INSTALL - The installation is simple and easy. Please prepare a screwdriver in advance. Just remove a couple of screws then you can remove the....
Check Stock

Weber 67847 Battery Electronic Igniter Kit with Ceramic Collector Box for Genesis (2008-2010)

  • Replacement igniter kit for 2008-2010 Genesis 300 series grills (67847).
  • This 67847 igniter includes a white ceramic U-shaped sparking device.
  • Please Note: 2007 Genesis models take a different part (67726).
  • DOES NOT fit Genesis 2011-present models w/ control knobs on front of the grill.
  • See below to confirm your grill model number will work with this part.
Check Stock

MENSI 11.8” Long Grill Replacement AA Igniter With Electrode Wire High Effiency Pulse Ignition Kit

  • AA battery type igniter one exit with ceramic electrode wire 300mm (battery is not included).
  • Grill replacement ignition part thin type igniter can save more space in your grill.
  • Red push button just small force and many sparks more effiecient.
  • 18mm mounting hole threads on your grill.
  • CSA Certified, Durable and Lasts Longer, Universal Spark generator BBQ Gas Grill Replacement.
Check Stock

GasSaf Igniter Kit Replacement for Weber 67847 Genesis E-310 E320 E330 S310 S320 S330 300 Series Grills 2008-2010 with Side-Control 2 outlet

  • Replacement for Weber 67847 igniter kit for - Genesis 300 Series (Model Years 2008 - 2010) include: E-310, E-320, EP-310, EP-320, S-310, S-320,....
  • This ignitor kit includes 1 igniter module, 1 push buttons,1 white ceramic U-shaped sparking device. But NOT INCLUDED AAA battery..
  • Replacement for Weber model part numbers (number located inside cabinet doors below cooking box): 83740101, 83741001, 83741301, 83750101, 83750201,....
  • Aftermarket replacement parts, not original weber parts. Replacement for Weber 67847 Electronic Battery Igniter Kit for Genesis (2008-2010).
  • Please Note: 2007 Genesis models take a different part. DOES NOT fit Genesis 2011-present models w/ control knobs on front of the grill..
Check Stock