Best Centrifugal Air Upper Intake

Power Blades Power Fan - Crawl Space Vent Fan

Durable: The fan has a strong motor which features a permanently lubricated bearing that operates quietly and requires no maintenance.
Compact But Efficient: This duct fan is compact and lightweight enough to be installed in areas with little available space.
With a diameter of 4 inches, speed of 2930 RPM and 100 CFM air flow.
Low Noise: Superior balanced centrifugal impeller for long service life & quiet operation.
A less than 30 dB noise level does not have any harm and will not disturb your work.
Wide Applications: You can have it in bathrooms, kitchens, workshops, basements, attics and etc, in order to boost airflow in HVAC systems.
Also, it can be used in grow rooms as intake fans or exhaust fan.
Specifications: Voltage 110/120V, Power 14W.
Max Operating Temp of Motor is 130℃ / 266℉.
Note: Please turn the fan off immediately if the blades get stuck by other objects.

Check Stock

iPower 4 Inch Booster Fan 90 CFM with Low Noise, Inline Duct Exhaust HVAC Vent Blower in Grow Tent, Basements, Bathrooms and Kitchens, 2 Pack

Efficient with low noise: Lead to great effects with a diameter of 4 inches, speed of 3200 RPM and 90 CFM air flow. A less than 54 dB noise level does not have any harm and will not disturb your work..
High safety and easy to install: With insulating coating, high safety factor. Portable, lightweight and easy to install. Sufficient 4.9' grounded power cord inside is convenient to use..
Durable: Superior balanced centrifugal impeller and high strength housing for long service life. The motor features a permanently lubricated bearing that operates quietly and requires no maintenance..
Wide application: Exhaust air for HVAC to remove heats & odors or intake fresh air, used in grow tents, kitchens, bathrooms, basements, attics, garage, workshops etc..
Max ambient temp is 60℃ / 140℉. Note: Please turn the fan off immediately if the blades get stuck by other objects and turn on after clean..

Check Stock

iPower 6 Inch 174 CFM Inline Fan Duct Exhaust Booster with Speed Controller for HVAC in Grow Tent, Basements, Bathrooms and Kitchens

Variable speed controller: Enable you to adjust the speed and airflow of the fan. Note: Please turn the fan off immediately if the blades get stuck by other objects and turn on after clean..
Efficient and high safety: Feature a diameter of 6 inches, speed of 2800 RPM and 174 CFM air flow. With insulating coating, high safety factor. Portable, lightweight and easy to install..
Durable: Superior balanced centrifugal impeller for long service life. The motor features a permanently lubricated bearing that operates quietly and requires no maintenance. Note: Not enclosed motor, not used in high humidity environments..
Wide application: Used as intake fan to bring fresh air into grow rooms, help to boost airflow in HVAC units to remove exhausts and odors from workshops and ventilate basements & attics, etc..
Power Cord: 4.9FT. Max operating temp of motor is 130℃ / 266℉.

Check Stock

iPower 4 Inch 90 CFM Inline Fan Duct Exhaust Booster with Speed Controller for HVAC in Grow Tent, Basements, Bathrooms and Kitchens

Variable speed controller: Enable you to adjust the speed and airflow of the fan. Note: Please turn the fan off immediately if the blades get stuck by other objects and turn on after clean..
Efficient and high safety: Feature a diameter of 4 inches, speed of 3200 RPM and 90 CFM air flow. With insulating coating, high safety factor. Portable, lightweight and easy to install..
Durable: Superior balanced centrifugal impeller for long service life. The motor features a permanently lubricated bearing that operates quietly and requires no maintenance. Note: Not enclosed motor, not used in high humidity environments..
Wide application: Used as intake fan to bring fresh air into grow rooms, help to boost airflow in HVAC units to remove exhausts and odors from workshops and ventilate basements & attics, etc..
Power Cord: 4.9FT. Max operating temp of motor is 130℃ / 266℉.

Check Stock

AGV Corsa R Helmet - Casanova (Medium-Large) (Black/Red)

Offering most of the same features as the top-of-the-line Pista GP R but in a carbon-fiberglass shell with adjustable vents, the Corsa R is designed for uncompromising performance on the track..
A new interior construction provides a stable, pressure-free fit, and the patented, reversible crown pad features two distinct fabrics, allowing riders to select between warm and cool sides depending on conditions or personal preference..
A removable nose guard and wind deflector are both included, and the Integrated Ventilation System (IVS) places intake ports at areas of maximum airflow.Shell in CAAF (Carbon-Aramidic-Fiberglass) engineered in four sizes with five-densities EPS structure.
Rear shape is engineered to minimize interference with racing suits structures in racing position.IVS (Integrated Ventilation System) ventilation with five large front vents and two rear extractors hollowed in the shell which direct air to the rider’s.
The unique central upper air intake has been strategically placed to capture maximum air flow in highest air pressure point..

Check Stock

Air Intake Hose - Compatible with Honda Accord V6 2003-2007 and Acura TL 2004-2006 - Replaces 17228-RCA-A00 696-001

Replacement Air Intake Hose - This air intake hose some times known as an intake duct, intake boot, or intake tube is located between the air intake....
Compatible Replacement for Honda Accord & Acura TL - This air intake hose is a direct replacement for the factory air intake hose on Accord V6 3.0....
Replaces Part# - 17228-RCA-A00, 17228RCAA00, 17228 RCA A00, 696-001, 696001 This air intake hose is a direct replacement for these part numbers which....
OEM Fit, Quality, Finish - This air intake hose is constructed of a high temperature rubber that will not break down and crack like the factory hose.....
Lifetime Warranty - This air intake hose for your Accord or TL comes complete with a Lifetime warranty. If the intake hose cracks, chips, or breaks in....

Check Stock

iPower 6 Inch Inline Booster Fan 174 CFM with Low Noise, Duct Exhaust HVAC Vent Blower in Grow Tent, Basements, Bathrooms and Kitchens, Silver

Efficient with low noise: Lead to great effects with a diameter of 6 inches, speed of 2800 RPM and 174 CFM air flow. A less than 60.7 dB noise level does not have any harm and will not disturb your work..
High safety and easy to install: With insulating coating, high safety factor. Portable, lightweight and easy to install. Sufficient 4.9' grounded power cord inside is convenient to use..
Durable: Superior balanced centrifugal impeller and high strength housing for long service life. The motor features a permanently lubricated bearing that operates quietly and requires no maintenance..
Wide application: Exhaust air for HVAC to remove heats & odors or intake fresh air, used in grow tents, kitchens, bathrooms, basements, attics, garage, workshops etc..
Max operating temp of motor is 130℃ / 266℉. Max ambient temp is 60℃ / 140℉. Note: Please turn the fan off immediately if the blades get stuck by other objects and turn on after clean.o turn off the power immediately, clean it up, turn the power back on when handled properly..

Check Stock

Air Intake Hose - Compatible with Honda Accord 2.4L 2003 - 2007 - Replaces 696-739 17228-RAA-A00

Replacement Air Intake Hose - This air intake hose some times known as an intake duct, intake boot, air filter hose, or intake tube is located between....
Compatible Replacement for Honda Accord Vehicles - This air intake hose is a direct replacement for the factory air intake hose on Accord 2003, 2004,....
Replaces Part# - 17228-RAA-A00 , 17228 RAA A00 , 17228RAAA00, 696-739 This air intake hose is a direct replacement for these part numbers which are....
OEM Fit, Quality, Finish - This air intake hose is constructed of a high temperature rubber that will not break down and crack like the factory hose.....
Lifetime Warranty - This air intake hose for your Accord comes complete with a Lifetime warranty. If the intake hose cracks, chips, or breaks in....

Check Stock

Bell M8 Carbon FIA8859/SA2020 Racing Helmet, Size 58 (7 1/4)

Ultra-lightweight carbon shell AND Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance..
Large eyeport for enhanced visibility AND versatile ventilation system featuring lower front chin bar ventilation and upper manual lever air intake vents that can be opened and closed..
APPLICATION: maximum versatility allowing the helmet to be used in all forms of racing. It features an ultra-lightweight carbon shell, premium interior, superior ventilation, and large eyeport for racers who require eyewear or prefer maximum visibility..
CERTIFICATIONS: Snell SA2020 AND FIA 8859 approved..
IN THE BOX: M8 Carbon Helmet, Clear SRV-8 Shield Installed, Manual Lever Air Intake Vents Installed, Draw String Helmet Bag, Plastic Tearoff Posts Kit, 3 Stainless Circle Grommets & Hex Wrench Key..

Check Stock