Best Cemented Carbide Tricone Bit

RedLine Tools - #53 (.0595) Circuit Board Drill Bit (10 Pack), 2 Flute .4200 Flute Length, 1/8 (.1250) Shank Diameter - RMD0595

Material: Cemented carbide, high speed stee. Fine grinding process makes bit more sharp cutting edge.
Drill bit has a large scraps discharge space, little resistance and smoothly during the scraps discharge.
Reduce cutting force and broken drill, improve the quality of hole wall.
Easy to change out and do a great job cutting through the PCB for solder holes.
Come in a great storage container that is easy to grab the drill bit you need when you need it.

Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

...receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
The cemented carbide material makes the turning tool durable and adaptable.
Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
cutting angle is 95 degree, cutting direction is right hand.
Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
Tight impact bolts, simple structure, often applied for small hole processing.
Note: due to the slight color change of manual measurement and differen....

Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 3'' 76mm )

✔️┋【More Teeth】Includes 15 teeth for faster cutting and more teeth than other brands..
✔️┋【Dimension】Cutting Dia: 3'' | 76mm.
✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable..
✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..

Check Stock

ASNOMY Tungsten Carbide Tipped Hole Saw Drill Bit for Hard Metal, 3/4 Inch T.C.T Hole Saw Cutter with 2pcs Titanium-Plated Pilot Drill bit for Metal, Steel, Iron, Wood, Plastic

【Top Quality】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
【Size】Cutting diameter：3/4Inch, Cutting Depth: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal.
【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
【Package】Include 1pc T.C.T Hole Saw Cutter and 2pcs Titanium-Plated Pilot Drill bit，each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust)..

Check Stock

K Kwokker 15Pcs Masonry Drill Bit Set 5/8\ to 1/8\

...onry drill bit set with case. Easy to store and take. 16mm 14mm 12mm 10mm 8mm 6mm 5mm 4mm 3mm (5/8" 9/16" 1/2" 3/8" 5/16" 1/4" 3/16" 5/32" 1/8"). There are multiple 9 sizes that will help in drilling by starting with the smallest bit and continuing to the size needed. To meet your more needs..
☺[Ceramic Drill with Cemented Carbide Tip, Hardness is Higher Than Ordinary Drill, More Wear Resistance] Excellent tile drill bits with nice point, make the drilling much more easier, less effort and work with a minimum of pressure. Like a hot knife thru butter! WATER IS THE KEY TO GETTING DRILL BITS TO LAST. PLEASE COOLING WITH WATER AND CONTROL THE SPEED WHEN DRILLING..
☺[Widely Used Range, a Good Beginning is Half Done, Carbide Drill Bits Perfect For] masonry, title, glass, wood, plastic, ceramic, terracotta, brick, stucco, brick, cinder block, steel, laminate flooring, garden pot, marble, pickguard, mirrors, windows, etc. PLEASE NOTE THAT FOR DIFFERENT SIZES, IT IS RECOMMENDED TO USE DIFFERENT DRILLING SPEEDS TO PREVENT DRILL BIT DAMAGE CAUSED BY WRONG DRILLING SPEEDS..
☺[1 x K Kwokker Ceramic Drill Bit Replaces Two Drill Bits (1 x Glass & Tile Drill bit + 1 x Masonry drill bit), Higher Efficiency] Custom triangle spear tip solves drill bit wander and sl....

Check Stock

ASNOMY Tungsten Carbide Tipped Hole Saw Drill Bit for Hard Metal, 4 Inch T.C.T Hole Saw Cutter with 2pcs Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, Plastic

【Top Quality】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
【Size】Cutting diameter：4 Inch (100mm), Cutting Depth: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal.
【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
【Package】Include 1pc T.C.T Hole Saw Cutter and 2pcs Titanium-Plated Pilot Drill bit，each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust)..

Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 1-3/4'' 45mm )

✔️┋【More Teeth】Includes 10 teeth for faster cutting and more teeth than other brands..
✔️┋【Dimension】Cutting Dia: 1-3/4'' | 45mm.
✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..

Check Stock

ASNOMY Tungsten Carbide Tipped Hole Saw Drill Bit for Hard Metal, 4-1/2 Inch T.C.T Hole Saw Cutter with 2pcs Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, Plastic

【Top Quality】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
【Size】Cutting diameter：4-1/2 Inch (115mm), Cutting Depth: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal.
【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
【Package】Include 1pc T.C.T Hole Saw Cutter and 2pcs Titanium-Plated Pilot Drill bit，each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust)..

Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

...receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
The cemented carbide material makes the turning tool durable and adaptable.
Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
cutting angle is 95 degree, cutting direction is right hand.
Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
Tight impact bolts, simple structure, often applied for small hole processing.
Note: due to the slight color change of manual measurement and differen....

Check Stock