Best Ccmt32 5 Carbide Insert

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set with 10 Extra Carbide Inserts in Fitted Box, 2387-2004plus

Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..

Shank Diameter: 5/8''. Overall Length: 8''. Min. Bore: 0.866''..
Boring from light roughing to finishing in small bores. Insert CCMT 32.51 Included & Key Included.
Accepts Inserts CCMT 32.51 and CCMT 32.52. Profiling bar for semi-finishing and finishing operations.
Bar hardness approximately 45HRC. Extreme gloss finish.
Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.

Insert: Grooving Insert MGMN300,External Threading Inserts 16ER A60 ,Turning Insert WC32.51（WCMT06T304),CC32.51 (CCMT09T304), DC32.51(DCMT11T304).
Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
Designed for Steel, cast iron and non-ferrous materials.
Used for turning and finishing on a wide range of materials.
7 pieces Carbide inserts for replace our 5/8” or 3/4" Lathe turning tool holder set,or other brand same size holder, you can search Asin:B07RBPHTZR or B07S9DDL6X buy tool holders.

Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
For semi-finishing and finishing operations.

Shank Size (H x W): 3/4" x 3/4". Overall Length: 4-1/2". Insert screw and wrench included.
Including 2 of MGMN300, 16ER, WCMT32.5, CCMT32.5, DCMT32.5 Carbide Inserts.
Black oxided smooth finish on each turning tool holder style and shank size..
Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
Including: 7 pcs indexable turning tool holder.
The cutting-off tool can only do cut off jobs. In regard to the other regular cutting, it's better to use the other 6 pieces of the set..

7 piece indexable carbide lathe turning tool set. Shank size: 1/2 inch x 1/2 inch. Overall Length: 4".
Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, parting, part-off, finish turning, facing, external grooving, etc..
Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.Insert screw and wrench included.
*** Insert kit Item#: 2387-2004INSERTS (Sold Separately on Amazon)***.

Size: CCMT 21.51(CCMT060204), 3/32" Thick,1/64" Radius..
Material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
Designed for Steel, cast iron and non-ferrous materials.
Used for turning and finishing on a wide range of materials.
80 degrees diamond single sided insert with molded chipbreaker, 10pcs/pack.

♥PACKAGE INCLUDES : 5pcs lathe turning tools (S12M-SCLCR06 + S10K-SCLCR06 + S08K-SCLCR06 + S07K-SCLCR06 + S06K-SCLCR06 )+ 5PCS CCMT21.51( = ISO CCMT060204 ) carbide inserts + 5PCS T8 wrench , Comes with individual package, packed in Plastic box with Size mark on the box..
♥5PCS BORING BAR : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
♥Lead cutting angle: 95 Degree, cutting direction: right hand, turning insert: CCMT21.51( = ISO CCMT060204 ), clear mark on the wrench, easy to identify bar holder..
♥ 5PCS CCMT21.51 INDEXABLE INSERTS : inserts are made of carbide and the coating material is Multilayer ,the Inserts can be used for finishing or semi-finishing stainless steel and cast iron..
♥ADVANTAGE : the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability .If you need more CCMT21.51/CCMT060204,you can search for ASIN: B09495PCR6.

Insert: Grooving Insert MGMN200,External Threading Inserts 11ER A60 ,Turning Insert WCMT050304(WCMT2.521),CCMT060204(CCMT21.51),DCMT070204(DCMT21.51).
Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
Designed for Steel, cast iron and non-ferrous materials.
Used for turning and finishing on a wide range of materials.
7 pieces Carbide inserts for replace our 1/2” or 3/8” Lathe turning tool holder set , or other brand same size holder, you can search Asin: B07PLYG1Y4 or B07MDC5LMX and buy tool holders.