Best Cat 5e Unshielded Keystone Jack

iwillink 24 Port RJ45 Through Coupler 1U Cat6 Patch Panel STP Shielded 19-Inch with Back Bar, Wallmount or Rackmount, Compatible with Cat5, Cat5e, Cat6 Cabling

  • Unshielded Cat6 Female to Female keystone jack can be used connect two Cat5e/Cat6 Ethernet network cables..
  • Fits all standard keystone wall plates and blank patch panel..
  • Cat6 keystone inline coupler is easy for voice, home networking, home office, video and more DIY project..
  • Phosphor Bronze with Gold plated on plug contact area and easy snap-in retaining clip..
  • Cat 6 keystone inline coupler meets Category 6 performance and in compliance with the TIA/EIA 568 standard..
Check Stock

Iwillink 24 Port Patch Panel, Cat6 Patch Panel with Jack Shutter, 1U Support, RJ45 Keystone Network Patch Panel Rackmount or Wall Mount for Cat6, Cat5e, Cat5 Cabling

  • Unshielded RJ45 Cat6 Keystone Jacks are designed to snap into wall plates, patch panels, and surface connection boxes for quick, seamless deployment with standard sized keystone ports..
  • 180 degree easy termination jack supports impact tool, or crimp tool termination.
  • this design provides easy access and termination..
  • IDC modules can be wired for T568A or T568B wiring. Supports 23 to 26 AWG solid or stranded wire.
  • Cat6A connector is backwards compatible with Cat 6 and Cat 5e bulk cable..
  • High-quality plastic construction with gold-plated contacts provide superior Cat 6 performance..
  • RJ45 ethernet Keystone Jack Will Deliver Maximum Bandwidth Speed With Ease..
Check Stock

Cat6 Keystone Jack, 20Pack Female to Female RJ45 Couplers Compatible with Cat7/6/6e/5/5e Ethernet Devices -White

  • FITS ALL STANDARD KEYSTONE WALL-PLATES:Cat6 RJ45 Keystone jack in-line coupler installs in patch panels, surface mount boxes, or keystone wall plates (face plates) with standard keystone ports.
  • 8P8C female to female keystone jack cat6 used with Cat 6/RJ45, Cat5, CAT5e Ethernet networking cables, Compatible with standard 4-wire RJ11 telephone/fax line, 8P8C Ethernet network jack insert.
  • Female-to-female CAT6 keystone jack RJ45 easily joins two RJ45, CAT5E or CAT6 wiring together, then run your own network throughout the home.
  • CAT6 Keystone inline Coupler is great for voice, home networking, home office, audio, video and more DIY project.
  • RJ45 keystone jack inline coupler meets Category 6 performance and in compliance with the TIA/EIA 568-C.2 standard,.
Check Stock

GearIT 50-Pack RJ45 Keystone Jack Insert for Cat5/Cat6 Keystone Wall Jack, Cat 5 / Cat 5e / Cat 6 / Cat 6a / Cat 6e Ethernet Jack, Keystone Wall Plates, Network Faceplate in White, 50 Pack

  • RJ11/RJ45 KEYSTONE INSERT- Cat6 Keystone Insert fits standard opening in a wall plate for keystone jacks and compatible patch panels and wallplates. Works with Decora Levitron Wall Plates.
  • FOR KEYSTONE WALL PLATE - Fits RJ11/RJ45 Ethernet Network Ports. Can be used as Cat 5, Cat 5e, Cat 6 Port Cover..
  • CATEGORY 6 KEYSTONE - Heavy Duty RJ45 Keystone modular jack for patch panels, boxes, wall plates, face plates with standard keystone ports. Future proof your network for 10-Gigabit Ethernet with cat 5e multi-pack bulk price..
  • CAT 6 KEYSTONE JACK - Reusable snap in network keystone category 6 KJ modules insert construction makes it easy to connect and disconnect from keystone wall plates..
  • COMPATIBLE WITH - Keystone Jack Inserts work with 1-port, 2-port, 3-port, 4-port, 6-port Keystone Wall Plates. Use the blank keystone for a cat5/cat5e/cat6/cat6a ethernet or network install for a more professional looking home or office network. Package contents: 25x RJ45 keystone inserts in white..
Check Stock

iwillink Waterproof RJ45 Coupler, Shielded Female to Female Waterproof Ethernet Coupler, IP68 Ethernet Outdoor LAN Cable Connector for Cat5e/Cat6/Cat7 Ethernet Cable, (2 Pack)

  • Unshielded Cat6 Female to Female keystone jack can be used connect two Cat5e/Cat6 Ethernet network cables..
  • Fits all standard keystone wall plates and blank patch panel..
  • Cat6 keystone inline coupler is easy for voice, home networking, home office, video and more DIY project..
  • Universal networking compatibility: Cat 6 Ethernet patch cable uses an RJ45 connector to provide universal connections from computers, printers, servers, routers to network media players, network storage devices, VoIP phones, and other standard office equipment..
  • Premium quality materials: The CAT-6 Ethernet patch cable gold-plated contacts and strain-relief boots provide durability for accurate data transfer and corrosion free connections.Meets or exceeds Category 6 performance in compliance with the TIA/EIA 568-C.2 standard..
Check Stock

CAT5E Plenum (CMP), Ethernet Cable 1000ft, Unshielded Twisted Pair (UTP) 24AWG, Solid Pure Bare Copper, 350MHz, UL Certified, Easy to Pull, No Kinking, Bulk Networking LAN Cable - Yellow

  • CABLE: Cat5e Plenum (CMP) bulk cable in 1000ft, 4 Pair, Unshielded Twisted Pairs (UTP), 24AWG, Solid Bare Copper Conductors for optimal signal strength. Top rated performance with 3-5 dB extra margin over EIA/ TIA-568.2-D standards. Suitable for PoE, PoE+. Our Cat5e cables have been tested with a Fluke DSX-8000 Versiv Cable Analyzer..
  • INSTALLATION: Install Cat5e unshielded plenum cable in areas with air flow, drop ceilings and between raised flooring. Plenum cable can also be installed in Riser rated areas: in the walls, between floors and in risers. Constructed with high quality FRPVC to reduce the spread of flames and emit less toxic smoke. Insulated with FEP for greater performance at higher temperatures. Run this Cat5e plenum cable up to 328 Feet (100 meters). Connect this cable with unshielded Cat6 keystone jacks, RJ45's.
  • SPECS/APPLICATIONS: Cat5e plenum cable supports 1Gb (Gigabit) Ethernet and up to 350MHz at 328 Feet. Achieve up to 5Gb at shorter distances with standard IEEE 802.3bz (2.5GBase-T and 5GBase-T). Power devices such as: PoE (Power Over Ethernet), computers, routers, IP Cameras, switches, keystone jacks, RJ45's, modems, Xbox, PlayStation, Apple TV, ethernet adapters, Fax Machines, Smart TV's, Mesh networks, access points, cctv and mu....
Check Stock

Cable Matters UL Listed 5-Pack RJ45 Keystone Jack Coupler Gender Changer in Black

  • Heavy duty Cat6 RJ45 couplers for patch panels or wall plates (face plates) with standard keystone ports.
  • Future-proof your network for 10-Gigabit Ethernet at a Cat5e price with this convenient and cost effective 5-pack keystone couplers for Ethernet.
  • Gold plated contacts and easy snap-in retaining clip ensure a secure and corrosion free connection.
  • This 8P8C female to female Ethernet coupler keystone jack is backwards compatible with Cat5e network.
  • RJ45 inline keystone jack coupler meets Category 6 performance in compliance with the TIA/EIA 568-C.2 standard.
Check Stock

Cable Matters 5-Pack Shielded RJ45 Cat 8, Cat8 Keystone Jack

  • Full metal jacket RJ45 Shielded for Category 8 channel network switch and server connections.
  • Robust die-cast housing provides superior shielding and mitigates alien crosstalk.
  • Cat8 connector supports 22 to 24 AWG Shielded wire with an outside diameter between 5.5 and 9.0mm.
  • Cat 8 performance in an RJ45 keystone jack for a 10GBASE-T, 25GBASE-T or even a 40GBASE-T channel compliant network up to 30 meters.
  • Fully backwards compatible with Cat 5e (Cat5e), Cat 6 (Cat6), or Cat 6A (Cat6A) Ethernet networks.
  • 180 degree easy termination jack supports impact tool-free, or crimp tool termination for Cat 8 cables.
  • A 180 degree wide-angle, hinged design with a removable cap provides easy access and termination of bulky Shielded cable.
  • IDC modules can be wired for T568A or T568B wiring.
  • compatible with Cable Matters Cat 8 Easy Crimp Tool for Metal Keystone Jacks (Model 180088).
  • Superior construction combines a one piece metal keystone with an integrated silencing cylinder to suppress EMI and NEXT electromagnetic noise and crosstalk.
  • Copper foil tape and cable ties ensure a professional installation and additional shield.
  • Snap-in Cat8 keystone jack with a retaining clip ensures a secure connection.
Check Stock

Cable Matters 110 Punch Down Tool with 110 Blade

  • Punch down tool cuts and terminates cable into a 110 patch panel or keystone jack.
  • Removable blade of impact style tool with twist and lock sockets can be stored in the tool body for transport.
  • Adjustable impact force settings (Lo/Hi) for cable termination into a jack, block, or patch panel with 110 IDC terminals.
  • Keystone jack compatible with Cat 3, Cat 5, Cat 5e, Cat 6, and Cat 6A network or voice cable.
  • Pair with a keystone jack punch down stand for a safe a secure installation.
  • 110 block tool uses spring-action for fast, low-effort cable seating and termination with reversible cut/punch blade.
Check Stock