Best Cars Made In 2000

OBDScar OS601 EOBD OBD2 Scanner Automotive Engine Fault Code Reader CAN Diagnostic Scan Tool (2018 Model)

  • Universal Compatibility: Applicable to MOST US-based cars (made in 1996 or later), EU-based cars (made in 2001 or later), Asian cars, and all OBD II/EOBD/CAN-compliant vehicles..
  • Smog Check: Clearly shows whether the emission-related systems are operating properly or ready for inspection and maintenance testing.
  • turns off the MIL (check engine light) and resets monitors.
  • views freeze frame data, read live PCM data stream, EVAP system test data, On-Board Monitor test data and display live O2 sensor test data..
  • Shows the code and what the code means directly. Able to retrieve generic (PO P2 P3 and UO) manufacturer specific (P1, P3, and U1) codes and pending codes, and vehicle information (VIN, CID and CVN). And can store the data you have viewed (DTCs, freeze Frame, live data, etc)..
  • Supports all OBDII protocols, including ISO9141, KWP2000, J1850 PWM, J1850 VPW and CAN(Controller Area Network)..
  • No battery needed, just plug it into the OBDII port and start diagnosis. Features a 2.5-foot flexible plug and a 7-button panel. Supports DTC look-up, and software upgrade. One-year limited warranty..
Check Stock

vgate OBD2 Bluetooth Scanner vLinker FD Diagnostic Adapter for FORScan, Work with Android and Windows

  • Made for Android FORScan Lite and Windows FORScan. It is no longer a cloned chip solution and boost the speed by at least 200% for quicker and smoother diagnosis experience.
  • The software scanner supports all Ford, Mazda, Lincoln and Mercury vehicles (99% of models after 2000 and around 92% of models after 1996). Please note: New 2019+ Mazda 3 and CX-30 are not supported yet.
  • Works perfectly with most cars, SUVs, MPVs, mini vans and light trucks made in the USA in 1996 or later. [For the purpose of check engine light]..
  • No toggle switch is needed to access the OBD-II network. It supports all OBD-II standard networks, including KWP2000 (ISO 14230-4), SAE J1850, ISO 15765-4 and SAE J1939, Compatible with ELM327, ELM329 and STN instruction sets.
  • [Safe to leave plugged in] Operating current: 51 mA. Automatically turns into sleep mode when not in use. Sleep mode current: 3mA (min.) If you have any questions, please contact us for guarantee.
Check Stock

NewYall HVAC Water Heater Control Valve Solenoid

  • For BMW 323Ci,Z8,328Ci 2000. For BMW 323i,328i 1999-2000.
  • For BMW 525i,530i (Only for cars with Auxiliary Heating) 2001-2003.
Check Stock

vgate vLinker FD Plus OBD2 Adapter Bluetooth BLE Scanner for FORScan, Work with iPhone, Android, and Windows

  • [Recommended by the FOScan team] Made for iOS, Android FORScan Lite and Windows FORScan. It is no longer a cloned chip solution and boost the speed by at least 200% for quicker and smoother diagnosis experience..
  • FORcan software scanner supports all Ford, Mazda, Lincoln and Mercury vehicles (99% of models after 2000 and around 92% of models after 1996). Please note: New 2019+ Mazda 3 and CX-30 are not supported yet..
  • Works perfectly with most cars, SUVs, MPVs, mini vans and light trucks made in the USA in 1996 or later. [For the purpose of check engine light].
  • No toggle switch is needed to access the OBD-II network. It supports all OBD-II standard networks, including KWP2000 (ISO 14230-4), SAE J1850, ISO 15765-4 and SAE J1939, Compatible with ELM327, ELM329 and STN instruction sets..
  • [Safe to leave plugged in] Operating current: 51 mA. Automatically turns into sleep mode when not in use. Sleep mode current: 3mA (min.) If you have any questions, please contact us for guarantee..
Check Stock

elm327 Bluetooth obd2 andoid Reader HS-CAN/MS-CAN Diagnostic Code Scanner

  • 2.STRONG FUNCTION Works on all OBD2 Vehicles (1996 onwards in USA) and EOBD vehicles ( Petrol cars from 2001 and diesel cars from 2003/2004 in Europe).
  • 3.EASY FOR OPERATION No need remove the instrument cluster,just connect with the Bluetooth it’s OK.
  • 4.Can support J1805 support all OBD-II protocols as follows: ISO15765-4 (CAN).
  • ISO14230-4 (KWP2000) ISO9141-2 J1850 VPW J1850 PWM.
Check Stock

Autel MS300 Universal OBD2 Scanner Car Code Reader, Turn Off Check Engine Light, Read & Erase Fault Codes, Check Emission Monitor Status CAN Vehicles Diagnostic Scan Tool

  • ... codes. It enables you to figure out why CEL is on like a pro and turn off check engine light instantly after proper repair..
  • MECHANIC APPROVED: MS300 OBD2 scanner works with most OBDII compliant(OBD2 protocols: KWP2000, ISO2000, ISO9141, J1850 VPW, J1850 PWM, and CAN) sedans, SUVs and light trucks post-1996 for US cars, post-2000 for EU-based and Asian cars..
  • DIAGNOSE IN SECONDS: MS300 auto code reader features easy to use 2 button design to read, clear DTCs to help home mechanics locate car problems fast. With an intuitive interface and easy-to-read backlit screen, this diagnostic code reader is easy to use..
  • SMOG CHECK: MS300 car code reader retrieves I/M Readiness status to check emission-related systems like misfire monitor, fuel system monitor, comprehensive components monitor, O2 sensors, EVAP to help your vehicle ready pass the annual smog check..
  • NO BATTERY NEEDED: MS300 OBDII scan tool communicates with vehicles through standard 16-PIN OBD2 cable and it’s powered by vehicle directly- no battery needed..
  • RETRIEVE VIN NUMBER: MS300 engine code readers can retrieve VIN (Vehicle Identification Number) on 2002 and newer vehicles supporting Mode 9 for quick vehicle identification and cut time spent locating the cause why the check engine light ....
Check Stock

LAUNCH Creader VII+ obd2 Scanner, 2022 Elite LAUNCH OBD2 Scanner CR529, 2 Items Bundle

  • ...pports advanced live data stream for focusing on any suspicious or symptom-specific data parameters, as well as O2 Sensor test and EVAP system test for detecting their faults in time to avoid emission problems..
  • WIDE VEHICLE COVERAGE: You can use this OBD2 scanner to diagnose a wide range of vehicles even 12V diesel cars. The Full OBD2 Functions can be used for all vehicles compatible with OBDII & CAN protocols, and the Four Systems Diagnoses can be used for 2006 and newer vehicles. Notice: To confirm the diagnostic compatibility, please contact us via Q&A or email..
  • 【2022 NEWEST VERSION, DIAGNOSE IN SECONDS】Upgraded of ANCEL AD310➤Lifetime Free Update for fixed more bugs and upgrade car makes up to 2022 models, including cars, SUVs, minivans, light-duty trucks sold worldwide.➤Read vehicle information (VIN, CID, and CVN) ,Turn off Check Engine Light➤2.8" color screen, Red-Yellow-Green LCD Display.➤Live data in the text and graph format,Data record, playback, and print via PC➤One-Click I/M & Help hotkeys make it easy to use..
  • 【ALL OBD2 PROTOCOLS VEHICLE & LIFETIME FREE UPDATE】 Lifetime free updates keep the latest bug fixes, new vehicles, newly added parameters, and functionality. Support all OBD2 protocols: KWP2000, ISO2000, ISO9....
Check Stock

[FANTTIK Day] T8 APEX 2000 Amp Jump Starter, 65W Two-Way Fast Charging, Portable Jump Starter for Up to 8.5L Gas and 6L Diesel Engines, 12V Car Battery Booster Deluxe Package

  • ...NCE IN 2023. Let's enjoy this carnival together!.
  • 65W TWO-WAY CHARGING: You can enjoy 6X faster charge for your laptops, phones, and other devices with 65W high-speed output. Completely input recharges in 1.5 hours, or 10 minutes go from 0% to 20% of charge your jump starter. Over 20% of power can already start your cars..
  • APEX FOR FURIOUS START: Sport car outlook design with super jump starting power for powerful engines starts. 2000 amp peak current allows jumping start up to 8.5L Gas / 6.0L Diesel vehicles. It can achieve 50 times jump-start with 20000 mAh battery capacity when fully charged..
  • MANUAL OVERRIDE: T8 APEX has a forced start function for dead cars, safe and spark-free operation. Press both the power button and light button at the same time for 3 seconds to get force output, when the "START" indication is shown on the screen, start the vehicle..
  • POWERFUL PERFORMANCE: 2000 amp peak current allows jump start up to 8.5L Gas / 6.0L Diesel vehicles. With 24-Month standby period after full charge, you can activate T8 APEX portable jump starter anytime without losing power during storage.
  • MULTI FUNCTION: Real-time battery status on a 3 inch informative screen offers a more intuitive user experience, you can start your cars easily. 400 lumen LED lig....
Check Stock

SKYRC Wireless Corner Scale Setup System for RC Cars

  • A compact corner scale system for radio-controlled cars. Includes 4 individual scale pads, download and use app to see data in an easy to use app..
  • App-enabled (Android and Apple app available in app stores) and data display in realtime via Bluetooth using lightning-fast Bluetooth 5.0 connection. Scale pads powered by button-style batteries.
  • Ideal system for those looking to get their chassis balance dialed, measure the car's corner weight, front and rear distribution and adjust as necessary..
  • Each scale can weigh up to 2000g/4.4lbs (8000g/17.6lbs for the entire system). Measurement selectable between grams and ounces..
  • Measure the car's corner weight, front and rear distribution and make adjustments if necessary. For radio-controlled cars. Phone not included..
Check Stock