Best Carbon Steel Valve

Ultimate Washer UW11-PWABV038 Power Washer Ball Valve Kit 3/8-Inch Male Plug X 3/8-Inch Female Quick Connect, 3000 PSI for High Pressure Hoses

Carbon steel ball valve kit designed for high-pressure hoses..
Switch wands, tips, or hoses quickly and easily..
Valve is easy to turn and provides good leverage under high pressure..
Inlet: 3/8 in. Male Quick Connect Plug — Valve: 3/8 in. High-Pressure Ball Valve.
Outlet: 3/8 in. Female Quick Connect — Max PSI: 3,000 PSI.

Check Stock

Zurn GT2700-10-2NH - Steel Grease Trap, 10 GPM 2\ with Flow Control

...e interceptor, whose flow rate is about 35 GPM (132.49 LPM). The interior space is divided into three different filter areas. The solid waste and grease will be stopped by the filter baffle firstly, and then the oil and filtered water will be discharged from the outlet valve and drainage outlet successively..
Coated Carbon Steel: Our 70 LB commercial grease trap is made of heavy-duty carbon steel, around 0.07 in (1.8 mm) in thickness, featuring durability and sturdiness. There is a rust & corrosion-proof coating on its exterior surface, which is easy to clean and hard to deform..
Reliable Sealing Effect: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
Ease Of Connecting：You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet pipe to the lower outlet hole, then it will work properly. A piece of connecting pipe is provided, with which you can place ....

Check Stock

4PCS 12" Braided Dual Tire Valve Extension Stem + 90 Degree Extender Rod For Truck RV Trailer Wheel 300mm

4pcs 12 inch Valve stem extension +4PCS 90 degree can be applied to various types of vehicles with a single tire width of less than 12 inch, or a dual tire width of less than 12 inches. Small and convenient, easy to carry, suitable for fast inflating the vehicle in any situation..
High-strength carbon steel U-shaped chuck and screw design. The U-shaped chuck can be fixed on hubs of different sizes (0-0.59inch). The chuck is tightly locked on the hub by rotating the screw, which prevents the extension stem from falling off the valve core..
Our connector adopts a 360-degree rotating universal size, which can fit 99% of the valve cores and air pumps of car models. For example: RVs, truck, bicycles, car, Balance car, motorcycles, ATVs, Trailer and more..
The Valve Extension Stem Rod uses 304 stainless steel braided flexible hose and arrow-shaped weaving technology. The precise weaving technology protects the inside of the product from damage and improves the service life of the product..
Package included:4pcs 12 inch Valve Extension Stem + 4PCS U-Chuck +4pcs 90 Degree Stem.

Check Stock

Aootf Carbon Fiber License Plate Frame- Heavy Duty Black Aluminum Car Tag Cover, Slim Front & Rear Holders Mount Hardware Kit- Stainless Steel Screws Bolts, Nut, Tire Valve Caps, Rattle Proof Pad

Carbon Pattern License Plate Holder- Aluminum car license frame, carbon pattern printed on the surface (NOT REAL CARBON FIBER LICENSE PLATE FRAME). 1.6mm Thick aluminum, Heavy Duty, corrosion-resistant, rust-resistant and weather-resistant, protect the License Plate Rust Proof. 3D Twill weave pattern carbon printing, clear, UV resistant, will not fade, more cost-effective than real carbon holder. Cool car tag frame is suitable for BMW, Mercedes-Benz, Audi, Porsche and other models.
4 Hole Slim Frame For USA License Plate- The black frames for front and rear license plates are designed according to the American standard license plate, suitable for all Universal/novelty/customized 12*6 inch plates in the United States/Canada.Thin edge design , Will not cover the registration sticker on the metal license plate, and guarantee 100% legal street. 2 pack frame suitable for front bumper bracket and back trunk license plate holder for all cars, trailers, trucks, SUVs, 4runners.
Easy To Install- License Plate Mounting Hardware in the kit, including stainless steel license plate screw bolts, nylon inserts, carbon fiber screw caps. M6*20mm screws are suitable for plate mount of most models, and the license plate fasteners can lock the license plate firmly. 4 machi....

Check Stock

Fish Tank Check Valve 2 Pc Stainless Steel Co2 Carbon Dioxide Fish Tank Check Valve Check Valve for Aquarium Planted Tank

【HIGH QUALITY】-The check valve is made of premium stainless steel materials. It’s very durable and sturdy. It is also rust-resistant, easy to clean and break-resistant..
【HIGH PERFORMANCE】-This stainless steel check valve is anti-leak and anti-backflow. It can prevent water flow from returning and keep the function and service life of carbon dioxide bottle. It is also anti-high pressured..
【FOR CO2 SYSTEMS ONLY】- The check valve is suitable for co2 supplying system and NOT air pumps. It is suitable for the tube of inner diameter 4mm and outer diameter 6mm..
【FUNCTION】- The check valve can ensure that the water and air circulations are consistent and going in the right direction without any backflow. It’s great for sensitive fish species.This can only be used with the pressure of steel cylinders. Air pumps, generators, and DIY cylinders are all useless..
【100% SATISFACTION GUARANTEE】-We support our best service, high quality products, if you have any questions about our products, please do not hesitate to contact us, we will try our best to help you and reply within 24 hours..

Check Stock

Valve Cover Engine Valve Carbon Fiber Style Spark Plug Cover, Valve Cover Gasket is Compatible with Honda VTEC B18 B16 B Series（Black）

【Perfectly Matched Engine Valve Cover】 The valve cover is installed on the car engine, which can protect your car engine and keep it clean (features: seal the engine so that the lubricating oil does not leak).
【Valve Cover Gasket Set Compatible Models】 Compatible with 1992-2001 Acura Integra (GS-R), compatible with 1997-2001 Acura Integra (R type), compatible with 1999-2000 Honda Civic sports car (Si), compatible with 1994-1997 Honda Del Sol (VTEC) Etc..
【High-Quality Valve Cover Gasket】 It is made of durable plastic carbon fiber, has a striking twill weave, and adds a unique engine valve spark plug cover, which is light in weight, high in strength, stylish & durable..
【Valve Covers Light Weight】Lightweight carbon fiber, release the old wildness of your car, is definitely an ideal substitute for old parts, and improve dynamic performance. For power enthusiasts, carbon fiber hood should be their real choice..
【Low Price & Low Noise & Easy Installation】 The engine cover is affordable, and the plastic carbon fiber style is cheaper than metal, and it can insulate noise better than metal. Easy to install, no need to drill and cut. (The weight is only 0.2kg).

Check Stock

53021077 Lifters replacement For 4.7 Dodge/Chrysler Lash Adjusters HLA Replaces Part # 53021077 5073596AA (16 Packs)

...that has two 8mm (5/16 inch) steel shanks to fit your drill and the included suction cups.
Electric drill attachment provides increased control and productivity with less user fatigue while you put the finishing touches on your tune-up.
EASY TO USE: Clean all carbon deposits off valve and valve guide.
Use a thin layer of engine valve lapping compound (not included) around the valve and install the valve in valve guide, Press correct size valve suction cup tool firmly onto head of valve, and use your power drill to slowly spin the small lapping tool until a suitable finish is obtained.
PACKAGE CONTENTS: Package includes (1) small engine valve lapping tool attachment, (4) suction cup adapters for use with your automotive, motorcycle, ATV, and small engine valves.
The small suction cup tool 20mm adapter stands at 1 inch (2.5cm), 30mm adapter stands at 1.1 inches (2.8cm), 35mm adapter stands at 1.5 inches (3.8cm), and 45mm adapter stands at 1.5 inches (3.8cm).
Power drill and engine valve grinding compound not included.

Check Stock

AFWFilters BWF-CRB15-56SXT Digital Carbon 1.5 Cu. Ft. Backwashing System with Fleck 5600SXT Valve (Remove Chlorine, Chloramines, Chemicals, Tastes, and Odors), BLACK

Backwashing carbon system for chlorine, chloramines, chemicals, tastes, and odors.
High activity carbon (GAC) provides high surface area for maximum treatment results.
System treats up to 2.7 GPM of CONTINUOUS flow at maximum contaminate levels*.
Fleck 5600SXT digital valve is a reliable, user-friendly valve with advanced digital control.
Complete with 5600SXT valve, 1.5 cu. ft. carbon, 10″ Structural USA resin tank and 3/4″ bypass valve.

Check Stock

Honeywell V5011N2089 1 2\ 2-Way F-NPT Globe Valve

Class 800 inline globe valve with non-rising stem and bolted bonnet for on/off actuation and flow control (throttling) in a pipeline.
Carbon steel valve body for tensile strength and hardness.
Bolted bonnet for tight assembly and reduced risk of leakage.
Socket-weld ends for welding to unthreaded pipes.
Maximum working pressure of 200 pounds per square inch (psi).

Check Stock