Best Carbon Pipe

Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\

Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.

Check Stock

Scotte Stainless Steel Reamer Tool 6 Blade Tobacco Pipe Carbon Scraper

Tobacco pipe reamer tool,carbon dioxide cleaner/carbon scraper.
Adopt import high quality stainless steel, very upscale atmosphere, show aristocratic temperament.
Bit pass needle design, can clean pipe, can change part of flue, very practical.
Can be fine-tuned to control the thickness of retained carbon pie.
Thicken design, material, strong and durable, beautiful and generous, ideal choice.

Check Stock

CATUDIY Intake Pipe Valve Cleaner Machine for Car Engine Fuel System Cleaners, Fuel Cleaning Tool Automotive Engine Carbon Deposit Cleaner 110V Valvetronic System Walnut Powder Sand Carbon Deposition

Intake Pipe Valve Cleaning Machine -- An advanced equipment (3-Year Warranty) used to deeply remove highly sticky carbon deposits on the engine intake manifold and intake&exhaust valves. Regular carbon cleaning keeps the engine in healthy condition so as to provide high quality power continuously (Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio).
Working Principle of Engine Cleaner -- Close the intake valve and then spray walnut powder into engine intake via air pump, while it will recycle the walnut powder through vacuum. This is a closed loop. Walnut powder will impact the carbon deposits on the inner wall of the intake pipe. After thousands of impacts, carbon deposits will be clear thoroughly.
Safe & Efficient -- As an eco-friendly pure natural polish material, walnut sand has advantages of hardness, pressure resistance and wear resistance. It can clean the intake pipe and backside of the intake valve thoroughly without pipes damage and corrosion different from a pollution-caused chemical intake valve cleaner.
Integrated Design -- Walnut sand can be sprayed and recy....

Check Stock

PVC Pipe Cutter Exhaust Pipe Cutter Tailpipe Cutter, Universal Chain Pipe Cutter Exhaust Pipe Cut Off Tool Copper Pipe Cutter Carbon Steel Cutting Pliers w/Non-Slip Handle

... the pipe, hand rotate chain around pipe until pipe is cut. Tips: Lubricating the exhaust cutter cutting wheels before use will give a more smooth cutting operation and extends the life of the item.
【Wide Application】The maximum cutting size is 0.09inches(2.5mm). This Pipe Cutter is suitable for cutting most low-carbon steel pipes, copper pipes and plastic (PVC, CPVC, PP, PEX, PE, rubber) pipes.
【Comfortable Grip】14.5 inch (37cm) exhaust pipe cutting tool has rubberized handles.
Cushioned for comfort and non-slip security.
【Withsatnd the Test of Time】This quality metal pipe cutter's cutting wheels were made of high quality 45# carbon steel, which won’t easily get dull. The head of the exhaust cutting tool won’t bend from during rotation. Sharp, Durable and Long life service time.

Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
Nominal size of the tap is that of the pipe fitting being tapped..
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..

Check Stock

Acrylic Tobacco Pipe Mouthpiece Long Stem 9 mm Activate Carbon Filter Reading Smoking Pipe Mouthpiece

Acrylic pipe mouthpieces,durable and portable..
Bent taper mouthpiece design, long pipe, very useful tobacco pipe stem ..
Smoking pipe Length:210 mm,Reading Pipe Long Bent Taper Mouthpiece.
Outside of filter is 10 mm ,wood and activate carbon filter can be inserted..
Package included :1 x Reading Pipe Long Bent Taper Mouthpiece.

Check Stock

PQY Red Flame Led Exhaust Muffler Tip Carbon Fiber Racing Automobile Car Tail Pipe Light 2.5 Inch Inlet 2.5 Inch Outlet Pack of 2

✿Universal Fit Cars/Trucks: 2.5 inch inside diameter inlet, 3.62 inch outside diameter outlet, 6.4 inch overall length.
✿Tail Pipe with LED Light:Creative design with LED Light when it's connected with the your car/truck, producing amazing visual effects. A must-have....
✿Carbon fiber suface texture:Carbon fiber muffler tip is resonated to enhance sound while protecting the exhaust pipe from sun/rain and avoiding....
✿Bolt On Type:Clamp on design, Easy to install in minutes.Carbon Fiber Sleeve with ROLL Edge Design..
✿PQY provides 1 year's warranty for the pipe.If you have any question ,please send us mail and we will respond you in 24 hours except weekend and....

Check Stock

Omninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees

High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..

Check Stock

Zurn GT2700-10-2NH - Steel Grease Trap, 10 GPM 2\ with Flow Control

...e interceptor, whose flow rate is about 35 GPM (132.49 LPM). The interior space is divided into three different filter areas. The solid waste and grease will be stopped by the filter baffle firstly, and then the oil and filtered water will be discharged from the outlet valve and drainage outlet successively..
Coated Carbon Steel: Our 70 LB commercial grease trap is made of heavy-duty carbon steel, around 0.07 in (1.8 mm) in thickness, featuring durability and sturdiness. There is a rust & corrosion-proof coating on its exterior surface, which is easy to clean and hard to deform..
Reliable Sealing Effect: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
Ease Of Connecting：You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet pipe to the lower outlet hole, then it will work properly. A piece of connecting pipe is provided, with which you can place ....

Check Stock