Best Carbide Insert Reamers

33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades

  • Package: you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace.
  • Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
  • Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade.
  • Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12.
Check Stock

Accusize Industrial Tools 3/8 x 3/8 Cut-Off Holder Parting Tool Mgehr06-2 of 2387-2003 with 10 Carbide Inserts for Cutting Aluminum

  • Insert model for this holder: Carbide insert TiN Coated MGMN200 Double End Cut-off.
  • Double End Cut-Off Carbide Inserts for Cutting Aluminum.
Check Stock

Polishing Bonnet, 9 to 10 In, Wool (Pack of 10)

  • Package Content: 10pcs x Carbide Insert, 1 x Plastic Case.
  • Overall Size: 11 x 6 x 3mm / 0.43" x 0.24" x 0.12"(L*W*T).
  • Hole Diameter: 4mm / 0.16"(Max), 3mm / 0.12"(Min).
Check Stock

04529 for PPRK6 Plastic Pipe Fitting Reamer 6 Piece Kit fit into standard 1/2" drills PVC pipe reamer tool Contains PPR75, PPR100, PPR150, PPR200, PPR300 and PPR400

  • ...e labor time and materials costs by reusing the fittings..
  • 【Set combination】：Kit with PPR75, PPR100, PPR150, PPR200, PPR300, PPR400, 6 Piece,Fits into standard 1/2 inch drill.Shaft Size: 3/8" hex..
  • 【Advantage】：Its carbide cutting insert provides a cutting edge on each side.Rotate before replacement and receive three bonus cutting edges.Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems..
  • 【Professional customization】: Specially designed for North American pipe diameters, So they as they fit specific ID/OD for reaming work.It is made of the latest hard alloy with high strength,high precision, durability and long service life. The surface is not easy to rust after coating treatment..
  • 【100% Satisfaction Guarantee】: Your satisfaction is our top priority, We strive to provide customers with quality services.If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days. Premium Support & 12-Mo....
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56018P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #3, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56065P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 3/16\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56026P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/4 " flute length, Partial Flute Length Carbide.
  • 1" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock