Best Car Amplifier Capacitors

MartinLogan ElectroMotion ESL Electrostatic Floorstanding Loudspeaker - Each (Gloss Black)

  • High frequency transducer: XStat CLS electrostatic transducer.
  • Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
  • MicroPerf panel is housed within a radical aluminum and composite AirFrame.
  • 129 square inches of sound radiating surface on both the front and back.
  • Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 42 - 22,000 Hz ±3 dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-300 watts per channel.
  • Dimensions: 52.1" high, 9" wide, 16.3" deep.
Check Stock

MartinLogan Motion SLM X3 Ultra-Slim 3-Channel Passive Soundbar - Black

  • L-C-R soundbar, Slim design, Binding Posts: Push style.
  • High Frequency Driver: Three 1" x 1.4" Folded Motion Transducers with 5.25" x 1.75" diaphragm.
  • Low Frequency Drivers: Six 4" paper cone, sealed cabinet.
  • Components: Custom air core coil inductors, polyester film capacitors in series and low DF electrolytic capacitors in parallel, overall system thermal/current protection.
  • Frequency Response: 120–23,000 Hz ± 3 dB.
  • Dispersion: 80° x 80°, Sensitivity: 93 dB @ 2.83 volts/ meter.
  • Impedance: 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers..
  • Crossover Frequency: 3,000 Hz (2-way design), Recommended Amplifier Power: 20–140 watts.
  • Dimensions with wall bracket (HxWxD): 6.3" x 48" x 2".
Check Stock

XDUOO TA-26 6N5P 6N8P AMP High Performance Tube Line Out Pre-amp Gold-Plated RCA Headphone Amplifier

  • Adopt 6N8P tube for pre-amp making voice sweet and exquisite..
  • Using 6N5P tube for buffer to bring soft and charming sound..
  • The Line Out can be used as Pre-amplifier： It has one line output, through the tube, and controlled by volume. It can be used as the Pre- amplifier of all kinds of audio amplifier or active speaker, and improve the sound quality of audio amplifier or active speaker..
  • Professional Resistances and Capacitors ；Gold-plated RCA port for amplifiers or active speakers..
  • Aluminum alloy shell sandblasted texture panel ：Sandblasted texture panel and solid aluminum alloy case are high end atmosphere, and can effectively resist external interference..
Check Stock

Martin Logan - ElectroMotion ESL - Hybrid Electrostatic - Each - Black

  • High frequency transducer: XStat CLS electrostatic transducer.
  • Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
  • MicroPerf panel is housed within a radical aluminum and composite AirFrame.
  • Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Recommended amplifier power: 20-300 watts per channel, Crossover frequency: 500 Hz.
  • Convenient push-style speaker terminals for bare wires, pins, or bananas, Sturdy, 1/4-20 ETC spikes.
  • Frequency response: 42 - 22,000 Hz ±3 dB, Dispersion: 30-degrees x 34" line source, Sensitivity: 91 dB/2.83 volts/meter.
  • Nominal Impedance: 6 Ohms, 1.6 @ 20 kHz, compatible with 4, 6, or 8 ohm rated amplifiers.
  • Weight: 35.5 lbs. each, Dimensions: 52.1" high, 9" wide, 16.3" deep.
Check Stock

ALPINE SWT-S10 1200w 10" Car Subwoofer in Bass Tube Enclosure+Amplifier+Amp Kit

  • ... Low Pass Filter: 50Hz - 250Hz. High Pass Filter: 15Hz - 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator. High Level Input with Smart Auto Turn-On. Minimum THD at Rated Power: < 0.05%. Frequency Response: 10Hz - 40KHz. Damping Factor: > 200 @ 100Hz.
  • 50 Amp Maxi Fuse. Dimensions: (W x H x L) 8.5" x 1.8" x 13". CEA Compliant Power Ratings: 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x 370 Watts bridged @ 4 Ohms < 1% THD. RMS Power Ratings. 750 Watts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. Features: RockvilIeRWK818 Gauge 2 Channel Car Amplifier Wiring Installation Kit.
Check Stock

MartinLogan ElectroMotion ESL X Floor-Standing Speaker Each (Satin Black)

  • High-frequency transducer: XStat CLS electrostaic transducer.
  • Panel dimensions: 40" x 8.6" (102cm x 22cm), Radiating area: 344 in2.
  • Low-frequency driver: Two 8” (20.3 cm) high excursion, high-rigidity paper cones with extended throw driver assembly, non-resonance asymmetrical chamber format, bass reflex.
  • Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 41–22,000 Hz ±3dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-400 watts per channel.
  • Dimensions: 59.2 x 9.4 x 20.7 (150.3cm x 23.8cm x 52.6cm), Weight: 52lbs. (23.6kg) each.
Check Stock

Orion Ztreet 2 Channel Car Amplifier – Class A/B Stereo Power Amplifier 2000 Watt Max 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply Car Electronics Amp Audio Speakers Great for Subwoofers

  • Class A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 2 channel car amplifier for subwoofers exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 2000 Watt Car Amplifier has a power rating distribution as followed 140x2 RMS @2 Ohms, 50x2 RMS @4 Ohms. The 2 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Crossovers- The Orion Ztreet Multichannel Car Amplifier for car audio subwoofers offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you ....
Check Stock

Orion Ztreet 2 Channel Car Amplifier – Class A/B Stereo Power Amplifier 3000 Watt Max 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply Car Electronics Amp Audio Speakers Great for Subwoofers

  • Class A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 2 channel car amplifier for subwoofers exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 3000 Watt Car Amplifier has a power rating distribution as followed 160x2 RMS @2 Ohms, 60x2 RMS @4 Ohms. The 2 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Crossovers- The Orion Ztreet Multichannel Car Amplifier for car audio subwoofers offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you ....
Check Stock

Orion Ztreet 4 Channel Car Amplifier – Class A/B Stereo Power Amplifier 2500 Watt Max 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply Car Electronics Amp Audio Speakers Great for Subwoofers

  • Class A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel car amplifier for subwoofers exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 2500 Watts Car Amplifier has a power rating distribution as followed 280x4 RMS @2 Ohms, 50x4 RMS @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Crossovers- The Orion Ztreet Multichannel Car Amplifier for car audio subwoofers offers you the ease of connectivity by providing the feature of crossover. The 4 channel car amplifier provides you....
Check Stock