Best Cap Locking Machine Cap

ATPEAM Car Steering Wheel Puller | Automotive Steering Wheel Compressor Remover Set | Vehicle Steering Wheel Lock Plate Removal Tool Kit

  • Built to Last: Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
  • Function: Remove steering wheels of most vehicles with or without telescoping tilt steering columns.
  • Use to apply equal pressure so you can safely remove steering wheels, Perfect for the home or professional mechanic.
  • Tips: We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
  • Various Steer Wheel Cap Screws: Includes 4 sets of cap screws to be used for various thread requirements. Size of Cap Screws: M8-1.25 X 90 Mm, 3/8"-16 X 3-1/2", 5/16"-24 X 3-1/2", 5/16"-18 X 4".
  • Package Includeds: This steering wheel removal kit includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements and a carrying case for your convenience.
Check Stock

1/4 Quarter Turn Aluminum Non Locking Diesel Fuel Cap for 3 Inch Semi Truck Fuel Tank Locking Gas Cap Fit for Freightliner Cascadia Columbia Century Coronado M2 Replace 03-37017-000 S2136

  • Compatible Models: Non locking diesel fuel cap fit for Freightliner Cascadia 108SD Argosy Century Columbia Coronado M2 112 114SD 122SD. Please pull down to view the specific adaptation.
  • Replacement Part Number: Replace 3-37017-000 S21361, 600148, 0337017000, 337017000. The inner diameter of the fuel tank cap is 3.5", the outer diameter of your fuel filler should be 3", Please measure the outer diameter of your fuel tank fill tube prior to ordering.
  • High-quality Material: The fuel gas cap is made of high-quality die-cast aluminum alloy, which is not easy to corrode and oxidize. The fuel tank cap is equipped with a rubber sealing ring, safety chains and rings, which will not leak after installation. Semi-trailer diesel fuel tank only, ventilated, 220°F heat release, longer life.
  • Anti-theft and Anti-leakage: The non locking diesel fuel cover has a high-quality lock cylinder to prevent diesel theft. 8 inch chain and 6.5 inch steel retention wire to prevent loss of fuel cap.
  • Products Include: 1 x fuel tank cap, inside the cap there are rubber seals, safety chains, lifting rings. When installing, please clean the fuel port part, pay attention to cover the fuel tank port to prevent impurities from entering the fuel tank, and then tighten the fuel tank cap....
Check Stock

Locking Screw-in Ratcheting Chrome Vented Key Lock Gas Cap Motorcycle Tank Sportster Harley Davidson Dyna Chopper Similar Fuel Caps 03-0320A-A Drag Specialties 141892 Softail 1996-2017 J&P 7200843

  • Excellent Quality ( Not Made in China ) New Chrome Locking Key Lock Vented Screw-In Gas Cap Bobber Motorcycle Fuel Tank 1996 to new Sportster Dyna Softail.
  • Locking Key Lock Without Slide Cover Chrome Harley stock style Screw-In Vented Gas Cap Sportster style gas caps are vented and are chromed steel. An inexpensive cap that does the job and works with stock and aftermarket This vented cap will work on single-cap model gas tanks or for the right-side gas cap Replaces Harley-Davidson 2 Keys included.
  • Thanks for Looking at our Quality items Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
Check Stock

Knurled Screw-in Ratcheting Gloss Black Vented Gas Cap Motorcycle Tank Sportster Bobber Harley Davidson Dyna Chopper Fuel Caps 61272-92A Drag Specialties 0703-0817 390281 V Twin 38-0325 Softail Knurl

  • Excellent Quality ( Not Made in China ) New Gloss Black Locking Key Lock Vented Screw-In Gas Cap Bobber Motorcycle Fuel Tank 1996 to new Sportster Dyna Softail.
  • Locking Key Lock Without Slide Cover Gloss Black Harley stock style Screw-In Vented Gas Cap Sportster style gas caps are vented and are Gloss Black steel. An inexpensive cap that does the job and works with stock and aftermarket This vented cap will work on single-cap model gas tanks or for the right-side gas cap Replaces Harley-Davidson 2 Keys included.
  • Thanks for Looking at our Quality items Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
Check Stock

TRANSMISSION FLUID DIPSTICK TOOL | For select mercedes benz, vehicles | w/Instructions + Free Cap + Free Pin + Seal 722.6 Transmissions – Replaces OEM 140589152100/917-321

  • 【EASY TO USE: HOT and COLD】 markings let you check your fluid level easily without the need for remembering numbers and measurements..
  • 【INSTRUCTIONS INCLUDED】 so you can accurately mantain and monitor fluid level without going to the Dealership..
  • 【INCLUDES NEW TRANSMISSION CAP LOCKING PIN】INCLUDES NEW TRANSMISSION CAP LOCKING PIN which will need to be replaced to "re-seal" the transmission..
  • 【 VEHICLE TOOL PART # 】Reference Part Numbers: 140589152100 / 1409910055.
  • 【DEALER Style MULTI VEHICLE TOOL】 : Not to be left in vehicle! Refit sealing cap after fluid level check..
Check Stock

Safe Rx Locking Pill Bottle | Combination Lock | Prevent Pill Theft Secure Medication or Small Valuable Items | Certified Child-Resistant Senior-Friendly | 4.5″ x 1.5″ 1-Pack Blue

  • SAFE RX LOCKING PILL BOTTLE: Our small locking pill bottle is 4.5” tall and 1.5” wide. Opaque hard plastic keeps contents safe from light and....
  • PREVENT PILL THEFT: Opioid addiction often involves sneaking 1-2 pills at a time. Our patented design makes undetected pilfering near impossible. ....
  • TAMPER EVIDENT: If the bottle is broken into, you’ll have clear evidence. When the cap has been forcibly removed, the grey tabs in the locking ring....
  • EASY TO USE AND SENIOR FRIENDLY: Simply turn the rings to align the 4-digit code and pull the cap straight off. Replace the cap and scramble the rings....
  • CERTIFIED CHILD RESISTANT: Proved 100% effective when tested on kids age 5 and under, and easier to use than the existing child-resistant bottles that....
Check Stock

Gloss Black Locking Screw-in Ratcheting Vented Key Lock Gas Cap Motorcycle Tank Sportster-2022 Harley Davidson Dyna Chopper Fuel Caps 03-0320AB-A DS Softail 1996-2017 61100117A 0703-0816 0815 Two keys

  • COMPATIBLE--Our UTV fuel gas lock cap is compatible with 2015-2021 Polaris RZR Ranger 900 1000 XP PRO XP Sportsman 570 800 Turbo S..
  • MORE SECURE--Help to lock your fuel to STOP thefts and damage. It is a must for anyone..
  • EASY INSTALLATION & USE--We provide installation video. LOCK & OPEN with key, turn 1/4 after locking to make sure lock complete. No other tools are needed for installation, it is simple, convenient, and quick..
  • WATERPROOF--The rubber keyhole cover of our UTV locking fuel gas cap is easy to avoid mud, dust, sand, and water.
  • helps to keep the keyhole clean, which increases the service time of the RZR fuel gas cap..
  • DURABLE--The UTV fuel gas cap made of high-quality ABS is strong, and the lock cylinder made of high-quality alloy is easy to open and close, which can provide good protection and have a long lifetime..
  • WHAT YOU GET--1 x UTV gas lock fuel cap with 2 keys. 1-YEAR WARRANTY & LIFETIME CUSTOMER SERVICE. If there are any questions, the after-sale team will give you a satisfied solution within 24 hours..
Check Stock

Kuryakyn 7657 Motorcycle Accessory: Receiver Hitch with 1-7/8\ Diameter Trailer Hitch Ball for 2014-19 Harley-Davidson Touring Motorcycles, Black/Chrome

  • ...h sides for optimum structural support.
  • This Black and Chrome Receiver Hitch for Touring Models remains hidden when ball mount is not installed and is the most simplistic bolt-on installation using simple hand tools.
  • Includes (1) Left Side Strut Hardware Kit - CONTINUED: (1) Right Side Strut, (3) 5/16-24 Nylon Insert Locking Nut, (1) Left Side Drawbar, (2) 3/8-24 Nylon Insert Locking Nut, (1) Right Side Drawbar, (2) 1/4-20 X 0.5 Hex Head Cap Screw, (1) Hardware Kit, containing: (1) 5/16-24 X 1.5 Full Thread, Hex Head Cap Screw, (2) Black Spacer .36, (2) Pin, 5/16 X 1.5, (2) Black Spacer .71, (2) 5/16 Lock Washer, (4) 5/16-18X1.75 Black Button Head Cap Screw, (6) 5/16 Flat Washer, (4) 5/16 Black Flat Washer, (2) 3/8 Split Lock Washer, (4) 5/16 Black Split Lock Washer, (2) 3/8 Flat Washer, (2) 5/16-24 X 1.5 Hex Head Cap Screw, (1) 1-7/8” Hitch Ball, (2) 3/8-24 x 2.75 Hex Head Cap Screw, (1) 3/4 Split Lock Washer, (1) 3/4-16 Hex Nut.
  • suggested tools for smooth installation: Combination Wrench Set, Torx Wrench Set, Hex Wrench Set, Torque wrench.
  • This Kuryakyn part is most compatible with Harley: '14-'19 Electra Glides, Road Glides (except '19 FLTRXSE), Road Kings & Street Glides (except '15-'19 FLHXSE).
  • Will not fit with accessory Saddlebag Guard Rails P/....
Check Stock

Baseball Cap Hat Washer for Washing Machine, 2 Pack ULG Hat Cleaner for Baseball Caps, Hat Organizer/Cap Washer for Dishwasher, Washing Hat Rack Hat Holder

  • 【Energy- & Time-Saving】Easy to install and operate. The hat washer for washing machine would help you save so much of your precious time and energy since you do not have to wash hats by hand. Our hat cage for washing really helps to bring new life to your caps..
  • 【Patented Design】 Our baseball hat / cap washer is patented for its special design—mesh bag with cap rack inside, unlike most hat cleaner for baseball caps that have only racks. The witty design secures the zipper slider in place and keeps the cap washer closed in the washing machine, preventing the cap from falling out..
  • 【Washing Machine & Dishwasher Compatible】 The cap cleaner works with washing machines, dryer and dishwashers, whether they are front-loading washing machines or top-loading ones. This design works great for maintaining shape of your caps as well as protecting your washing machine and clothes from being scratched or tangled..
  • 【Solid Structure】 The hat rack for baseball caps is made of ultra-sturdy plastic (PP), with great durability. The mesh bag has a slightly curved bill to be compatible with both flat brim and curved bri....
Check Stock