Best Can Ethernet Transceiver

Logitech USB Unifying Receiver - 2 Pack

  • Applications: This device can be wildly used to wireless remote control,wireless audio,somatosensory devices, RFID, NFC, smart grid, smart home, etc..
  • NRF24L01 Wireless Transceiver Module with 125 Communications channels, multi-point communication and frequency hopping to meet the communication....
  • NRF24L01 wireless transceiver module built-in 2.4GHz antenna, small size, 15x29mm (including antenna).
  • it can be directly connected to a variety of....
  • The operating voltage of the wireless module is generally 3.3v, while the ordinary 51 microcontroller is 5v. This module is convenient to shop....
  • NRF24L01 Socket Breakout Adapter with NRF24L01 Wireless Transceiver Module.
Check Stock

AnyTone AT-5888UV 50W Dual Band Ham Mobile Radio VHF 144-148MHZ / UHF 420-450MHz Car Transceiver

  • 1.The transceiver is a ruggedly-built,high quality Dual-band transceiver providing 50Watts of power output. Quad band transceiver for the widely....
  • 2.Dual-band mobile radio has four independent receiving bands, consist of UU,UV,VU,VV for dual receive and dual output, plus receiving for signal of....
  • 3. Cross Band Repeater: 758 memory channels, full duple operation with independent volume and squelch controls, compander and built-in CTCSS/DCS,....
  • 4.CHIRP SUPPORT. Free software also can download at Anytone office website..
  • 5.Package contents: 1 x Anytone 5888UV Transceiver, 1 x Microphone, 1 x Mobile Mounting Bracket, 1 x DC Power Cable with Fuse Holder, 1 x Screws for....
Check Stock

Wiitek SFP+ to RJ45 Copper Modules, 10GBase-T Transceiver Compatible for Cisco SFP-10G-T-X, Ubiquiti, Netgear, Mikrotik, Unifi (Cat 6a/7 or Better, 30-Meter)

  • WIDE COMPATIBILITY:This 10G Copper SFP+ Transceiver is 100% compatible for Cisco SFP-10G-T-X, Ubiquiti, D-link, TP-LINK, Supermicro, Netgear, Mikrotik, Unifi and Other Open Switches, connecting 10g ethernet Switch, Edge Router, media converter.
  • CABLE DISTANCE:10GBase-T SFP Module supports Links up to 30m using Cat 6a/7 or Better Cable , works for 5GBase-T, 2.5GBase-T using Cat 6a/7, and 1000Base-T using Cat 5e cable or better(10G SFP+ Ports).
  • PROTOCOLS: 10Gb RJ45 SFP Compatible SFF-8431 and SFF-8432 MSA , IEEE 802.3az.
  • Each Module is individually 100% tested on the 10G RJ45 Ethernet Switch before delivery.
  • HOT SWAPPABLE:Hot-swappable transceivers that plugs into an 10Gb SFP+ port,plug and play,no need to power down if installing or replacing.
  • SUPPORT: 30 Days Free-returned, 3-year Product Quality Assurance, Free Lifelong Technology Support..
Check Stock

Open SFP Slot A Pair of 1.25G/s Gigabit Fiber Ethernet Media Converter 10/100/1000Base-Tx to 1000Base-SX SMF RJ45 to SFP Slot, Support SFP Gigabit modules up to 120KM(2 Pack)

  • What You Get: 2pcs Gigabit Ethernet SFP Slot media converters.
  • 1 x User’s Manual. Support wide power supply voltage (100V-240V), Power Supply: 5V-1A, UL Certified..
  • Supports Multi-mode or Single-mode fiber using different SFP modules (not including any SFP transceiver).
  • Convert and extend different networks over a LC fiber cable connection up to 120KM (depends on the SFP transceiver).
  • RJ45 Port: 10M/100M/1000M Auto-negotiation, full Duplex or half Duplex, Auto-negotiation, Supports MDI/MDIX auto-crossover, Complies with IEEE 802.3/802.3u/802.3z/802.3ab..
  • Fiber Optical Port: 1.25Gbps 1310-nm wavelength SFP port, connecting the BiDi transceivers up to 30-120km.
  • Fiber Type: SMF, Cable Type: UTP/STP Cat.5e for 100 meters..
  • Plug & Play: Simply plug in optical port and RJ45 port, and it will work immediatelly. Status LED's for TX, FX LINK/ACT, POWER, FDX to easily monitor network status. Supports jumbo frame size 9K bytes.
  • Supports working temperature range from 0°C to 60°C..
Check Stock

A Pair of 1.25G/s Bidi Gigabit Single-Mode Fiber Ethernet Media Converter with 2PCS Bidi SFP LC Transceiver Module Included, 10/100/1000Base-Tx to 1000Base-SX SMF RJ45 to SFP Slot up to 30KM

  • What You Get: 2pcs Gigabit Single-mode Ethernet SFP Slot media converters.
  • 1 x User’s Manual. Support wide power supply voltage (100V-240V), Power Supply: 5V-1A, UL Certified..
  • Fiber Optical Port: 1.25Gbps 1310-nm wavelength SFP port, connecting the BiDi transceivers up to 30km(2 SFP LX Transceiver included).
  • Fiber Type: SMF, Cable Type: UTP/STP Cat.5e for 100 meters..
  • RJ45 Port: 10M/100M/1000M Auto-negotiation, full Duplex or half Duplex, Auto-negotiation, Supports MDI/MDIX auto-crossover, Complies with IEEE 802.3/802.3u/802.3z/802.3ab..
  • Plug & Play: Simply plug in optical port and RJ45 port, and it will work immediatelly. Status LED's for TX, FX LINK/ACT, POWER, FDX to easily monitor network status. Supports jumbo frame size 9K bytes.
  • Supports working temperature range from 0°C to 60°C..
  • 【100% Money Guarantee】15 years OEM factory competency, Most efficient technical support with superb processing technology.★Our committed to provide the best product and services to every customer..
Check Stock

2Pcs NRF24L01+PA+LNA RF Wireless Transceiver Module with SMA Antenna 2.4G 1100m & Wireless Module with Breakout Adapter On-Board 3.3V Regulator

  • NRF24L01+PA+LNA Wireless Transceiver Module is a 2.4GHz ISM band transceiver, compatible with Raspberry Pi. Auto-acknowledge and auto-retransmit abilities.
  • Support up to six channels of data reception.
  • the transceiver come with power amplifier and SMA antenna, which make the effective communication distance has been greatly expanded..
  • A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps)..
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • Applications:It can be wildly used in wireless remote control such as RC planes/vehicles, wireless audio, wireless voice transmission such as VoIP, wireless networks, smart home,somatosensory devices, RFID, NFC etc..
  • Package Included:2 x NRF24L01+PA+LNA Wireless Transceiver Module+2 x SMA Antenna+2 x NRF24L01+ Breakout Adapter.
Check Stock

4PCS 1000BASE-T Gigabit SFP to RJ45 Copper Ethernet Modular Transceiver for Cisco,Meraki,Ubiquiti,D/TP Link,Supermicro,Netgear,Broadcom, 1.25G SFP-T CAT5E/CAT6 up to 100m Mikrotik S-RJ01

  • ...AS), Storage Area Network (SAN), and High Performance Computing (HPC) applications Low power consumption and low EMI emission design SFP RJ45 module.
  • Hot-pluggable with advanced ESD protection..
  • Easy to use & Durable: Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Less than 1.05W power dissipation and heat-conducting gasket provide superior heat dissipation function..
  • GESD is a professional manufacturer and accept customized orders. If you are not sure about the compatibility of your device, please feel free to contact us for customized SKU to meet your needs(We offer many compatible options).★After-sales Service:30-day free return,3-year warranty,lifetime technology support.We produce high quality transceivers,every transceiver has been tested for 28 steps before shipping..
Check Stock

MX62 VHF+UHF Duplexer 144‑148MHz/ 400‑470MHz Different Frequency Indoor Antenna Combiner for VHF+UHF Duplexer Antenna Duplexer Antenna Combiner Transit Station Duplexer Walkie Talkie Accessory Differe

  • Fine Workmanship ---- Can also be used to separate UHF/VHF transmissions from UHF transmissions so that one transceiver can be connected to two antennas..
  • Features----------The duplexer combines the output of the HF/VHF transceiver and the output of the UHF transceiver so that both transceivers can be connected to the same antenna..
  • Feature ---- The MX62N duplexer is a series of inductance coils and capacitors that acts as a band‑pass filter..
  • Note ---- The MX62N duplexer can be used in two different ways, used in different frequency, can not transmit at the same time..
  • Applicaation ---- The MX62 VHF + UHF duplexer is designed for indoor use, usage frequency is 1.6‑55MHz / 144‑148MHz&400‑470MHz..
Check Stock

USB Programming Cable for LEIXEN LX VV-808S/ VV-898 Car Mobile Radio

  • Portable Two Way Radio Mobile Transceiver. The newest transceiver differs from traditional one, built-in 12000mAh Battery, so it can work continuously....
  • A DC 13.8V hole and a power charging hole on the side of the radio. Plug the power cord into the charging port when charging. If you want to use the....
  • The mobile transceiver built-in a mini fan and a temperature sensing system, so when the machine is continuously used in high power transmission, and....
  • Dual PTT function: Dual Push-To-Talk (PTT) speaker mic. Communicate easily with the two easily accessible buttons. There is a speaker switch on the....
  • Measure: 6*8.1*1.8 inches. Package including (main): 1*mobile radio, 1*Instruction, 1*mobile antenna, 1*dual PPT mic, 1*so239 to pl259 adapter,....
Check Stock