Best Cadence Bluetooth Headphones

Magene S3 Cadence/Speed Sensor

[Battery] Remove the insulating sheet of the pre-installed battery before usage.
re-install the battery to switch between the speed and cadence mode..
[Mode] 1 sensor can ONLY select one mode (Speed or Cadence) at the one time.So you need 2 sensors to test both speed and cadence.(1 for speed,1 for....
[Device] When using the Bluetooth protocol 1 sensor can ONLY connect to 1 APP or device concurrently.
When using ANT+ protocol it can be connected to....
[Connection] When using a smart phone APP, you need to search for the sensor in the APP, searching through the phone system’s Bluetooth setting is....
[Hibernation] S3+ sensor will automatically enter the sleep state for 1 minute to save power after the sensor is stationary, the sensor will ONLY....

Check Stock

MEILAN Oval GPS Bike Computer and C3 Speed and Cedence Sensor

...y GPS chip, It supports three systems: Beidou, GPS and GLONASS, fast global positioning, real-time tracking distance and speed, and record the cycling track automatically..
【Speed and Cadence 2 in 1】Accurately track speed, cadence and distance in real time, and transmit it to your smartphone or bike computer via Bluetooth..
【Compatible with Bike Computer and Sport Watch via BLUETOOTH 4.0】C3 speed and cadence sensor only supports Bluetooth connection, and can be compatible with bike computers and sports watches. C3 does not support devices compatible with the ANT+ protocol, such as Garmin, Bryton, etc..
【Work with Zwift for indoor trainer】 C3 works with most bikes and frame sizes, It can be used for indoor training with most bikes which is inserted into the indoor trainer platforms. Capture speed and cadence on your favorite indoor cycling platform and display on your phone or PC via Zwift app. Unsuitable installation notice: Some bikes have large flat fork spans, or most indoor bicycles, spinning, and the trainer, which is not suitable for installing this product..
【2.4 inch large screen & Full screen backlight】Oval uses a full-screen backlight and anti-dazzling design with a 2.4-inch large screen display, allowing you to clearly view the....

Check Stock

LIVLOV V4 Bike Cadence Sensor, Bluetooth & ANT+ Cycling Cadence Wireless Bicycle Cadence Sensor IP67 Waterproof for Zwift Elite HRV Endomondo Peloton Bike Computers

【BLUETOOTH & ANT+ DUAL-PROTOCOL】Use the LIVLOV V4 sensor to accurately track your cycling cadence in real-time. Connect the cadence sensor to the bicycle computer/indoor trainer via ANT+ and connect to smart device apps via Bluetooth..
【WIDE COMPATIBILITY】The RPM cadence sensor is compatible with most mainstream iOS and Android fitness apps: Zwift, TrainerRoad, Rouvy, Cyclemeter, Openrider, Tacx, RideWithGPS, Peloton, etc. If you want to confirm compatibility with your app, please send us a message on Amazon..
【LIGHTWEIGHT and EASY to INSTALL】Size only 38.5mm×38mm×12mm & weight only 10.5g. No magnets, wireless sensor, it can be easily attached to your bike’s crank arm or shoes through the included rubber-elastic rings and double-sided tape..
【BUILD QUALITY】V4 cadence sensor is waterproof, sweatproof and dustproof. Built-in replaceable CR2032 button battery, battery life up to 500 hours / wireless signal strength up to 20 feet. Easy to replace, use the coin to unscrew and replace the battery. Please remember to remove the battery insulation sheet before installation..
【NOTE】Remove the insulating sheet of the pre-installed battery before usage, re-install the battery to switch between the speed and cadence mode. Unlimited cadence se....

Check Stock

moofit Cadence Sensor Bluetooth/ANT+ IP67 Waterproof Wireless RPM Cycling Spin Bike Cadence Sensor for Wahoo/Zwift/OpenRider/Endomondo/TacX/TrainerRoad (MooFit app Unavailable)

BLE 4.0 & ANT + TECHNOLOGY -Connect the cadence sensor to your bike computer/indoor trainer via ANT+ and connect to smart device apps via Bluetooth..
REAL-TIME DATA -Tracking cadence data in real-time on your bike computer or smartphone with compatible training apps..
EASY TO INSTALL -NO magnets needed, the Bluetooth / ant+ cadence sensor attaches to your bike’s crank arm..
IP67 WATERPROOF -You can cycling with the cycling cadence sensor even on rainy days, enjoy your cycling every day in all weather..
WIDELY COMPATIBLE -The cycling sensor campatible with most of mainstream fitness APPs, such as Wahoo Fitness, Zwift, Endomondo, E-lite HRV, Uhr, RideWithGPS, Cyclemeter, Peloton(only support iOS version), Openrider, etc..

Check Stock

Magene Outdoor Speed/Cadence Sensor for Cycling, Wireless Bluetooth/Ant+ Bike Computer RPM Sensor, Compatible with Wahoo Fitness, Strava

[Battery] Remove the insulating sheet of the pre-installed battery before usage.
re-install the battery to switch between the speed and cadence mode..
[Mode] 1 sensor can ONLY select one mode (Speed or Cadence) at the one time.So you need 2 sensors to test both speed and cadence.(1 for speed,1 for cadence).
[Device] When using the Bluetooth protocol 1 sensor can ONLY connect to 1 APP or device concurrently.
When using ANT+ protocol it can be connected to multiple devices at the same time..
[Connection] When using a smart phone APP, you need to search for the sensor in the APP, searching through the phone system’s Bluetooth setting is invalid..
[Hibernation] S3+ sensor will automatically enter the sleep state for 1 minute to save power after the sensor is stationary, the sensor will ONLY start sending broadcasts after it is properly woken-up..

Check Stock

MOOFIT Speed/Cadence Sensor,ANT+ Bluetooth Cycling Cadence Sensor,Wireless RPM Sensor for Bicycle or Spin Bike,IP67 Speed and Cadence Sensor Compatible with Wahoo, Zwift, Strava,Openrider,Peloton

✅Effective Tracking: Moofit 2nd generation cadence sensor helps track and caputer real-time cycling cadence/speed date effectively.Built-in with reliable geomagnetic and upgraded chips for enhanced RPM cadence or speed date accuracy..
✅ANT+&Bluetooth Dual Protocol: ANT+&BLE Dual-Modes Technology enables the bike cadence sensor to be connected with bike computer,cycling apps,fitness equipment and smart watch..
✅Third-party App Compatible : Moofit Cycling cadence sensor compatible with most popular cycling apps such as Wahoo fitness, Zwift, Rouvy, Peloton, Cyclemeter,Openrider,TrainerRoad,CoospoRide,etc..
✅Speed or Cdence Mode: Re-install the battery to switch the speed and RPM cadence mode.Red light indicates speed mode,Blue light indicates cadence mode.You can not use speed and cadence sensor at the same time..
✅Magnet-less, Lightweight: Weighs only 8g,with no magnets or other exposed parts to line up, these wireless cadence sensor are easy to install to your crank arm or bike hub..

Check Stock

XOSS Vortex Cadence and Speed Sensor Wireless IPX7 Waterproof - 300 Hours Dual Modes Bike Sensor ANT+/Bluetooth 4.0 Compatible for Cycling Computer

【Attention】The VORTEX speed & cadence sensor support connecting with your indoor training APP to record indoor cycling data..
【Speed & Cadence Dual Mode】XOSS VORTEX Cycling sensor can be used in two modes: Speed/Cadence Mode. Connects Through ANT+/Bluetooth, You can fast switch mode via XOSS APP anytime you want. VORTEX also compatible with other devices, you can consult us for details *To get both speed and cadence data, you need to install two sensors. Only one mode is available at the same time..
【Accurate Data & XOSS APP Support】Through VORTEX speed and cadence sensor, your cycling data is more accurate than GPS. Real cadence in real-time to pace your cycling on XOSS bike computer and XOSS App. Measure range: Cadence max 250RPM/Speed max 85KM/H..
【New Design】The shell of the XOSS VORTEX bike sensor uses a spiral trapezoid shape which not only fits better to the surface of the crank and hub but also conforms better to the principles of aerodynamic design and The sense of speed of riding..
【IPX7 Waterproof】Prevent water and dust, make your riding better and better in extreme weather..

Check Stock

iGPSPORT Bike Cadence Sensor CAD70 for Cycling Computer with Dual Module Bluetooth and ANT+

✔ Capture cycling cadence data from bike computer via ANT+ or from training APP in mobile via Bluetooth.
✔ Easy to install, maintain and move between bikes - No magnets. Cadence sensor easily attaches to your bike's crank arm.
✔ ANT+ and Bluetooth: Compatible with any ANT+ equipment such as Garmin,Bryton,Polar,Wahoo,iGPSPORT bike computer and more.
✔ Compatible with most of mainstream training APP (via Bluetooth) ,such as Wahoo fitness,iGPSPORT,Zwift,Runtastic Road Bike and many more.
✔ Long battery life: Normal use for a year(one hour per day).

Check Stock

CYCPLUS Bike Computer Set Include Speed Sensor and Mount Wireless Bicycle Speedometer Odometer Waterproof ANT+ Bluetooth MTB Tracker

【Dynamic GPS Positioning】Higher sensitivity, Higher accuracy, Faster positioning. The navigating chip is imported from Switzerland. The GPS signal tracks your route. After connecting to your phone with bluetooth, your journey is synchronized with the app, so you can see exactly which route you've taken for your ride..
【2.9-inch Screen】The glare-free backlit screen introduces FSTN technology, which is highly visible in sunlight. The LCD screen will light up automatically which depending on the sunrise and sunset time in different time zones. You can read your data easier and clearer day or night. High quality tempered glass, do not worry about nails scratches the screen. (Note: When using the product for the first time, be sure to set the time zone first. And then all functions can be run normally.).
【ANT+ Sync Sensor and App】It supports simultaneous recording of various data such as speed, cadence, heart rate, power, route traveled, altitude, etc. Strava account can be added via our APP to synchronize the data on cycling computer. Helps you monitor workout data and gives you scientific training experience. (Search for "XOSS" in the Google Play Store or Apple App Store to download the app).
【SPEED SENSOR & CADENCE SENSOR】The bike comp....

Check Stock