Best Cable Railing Kits 2

Muzata 330Feet 1/8inch Stainless Steel Wire Rope Aircraft Cable Railing Decking 7x7 Strand Indoor Outdoor DIY Balustrade with 1pc Cable Cutter WR01,WP1

  • This is Non-Turnbuckle System according to principle of screwing L&R handed thread lag at the same direction and the both lags will go into the opposite direction，So the cable will be tightened by the R&L handed thread lags without torsion force and damage.
  • The length of cable spanning capability of this kit is the same as other common cable railing kits；.
  • This cable railing hardware was made of Marin Grade T316-Stainless Steel, and it can be used indoor and outdoor.
  • The total length of this lag is 4.1 inch，Length of thread bar is 2 inch，this cable railing lag fit standard 1/8 inch（3.2mm）steel wire rope；and the length of cable is 1 inch shorter than the distance of inner edges of posts which on both sides usually to be recommended；.
  • This Right&Left hand thread screw lags are connected with cable need by using hydraulic crimper(This item not include)，and this item go with a correct size dill bit and a special wrench.
  • When you really understand this non-turnbuckle system，you will find the swage turnbuckles and other trivial parts are not necessary in cable railing system，And this system will be more durable and beautiful..
Check Stock

WELWIK 5PCS 304 Stainless Steel Wing Nut Wire Rope Cable Wire Rope Clips Clamps Locking Device Wing Nut

  • These wire rope locking devices are made of high quality stainless steel with 3 / 32 inch and 1 / 8 inch diameter wires or cables. The cable clamp is used for tightening steel wire rope, which is widely used in industry or home decoration, such as tent rope / wiring / railing cable tightening..
  • You will get: 5 packs of high-quality stainless steel wire rope locking devices..
  • Cable clamps are ideal for rigging ropes, wires and cables in unlimited applications, mainly for shading hardware kits and cable railing installation, rigging, temporary guardrail systems, fixed loads, ships, boats, hanging banners, flags and signs, and basically any cables involved..
  • The wire rope locking device is specially designed to clamp the wire rope on itself, which is very suitable for fixing the thimble of cables and ropes..
  • Perfect match of cable railing Kit. The cable clamp is used for tightening steel wire rope, which is widely used in industry or home decoration, such as tent rope / wiring / railing cable tightening..
Check Stock

Muzata 40Pack Cable Railing Kit Protector Sleeve Adhesive Grommet Protective for 1/8\ 5/32\ Wire Rope Wood Metal Posts T316 Stainless Steel Cable Deck Stair Railing CR66,CP2

  • Clean Finished Look - The protector sleeves could be used on INTERMEDIATE posts to cover ugly holes and present a clean look of your deck railing. They can also work with cable railing kit on END posts to for a neater look. Please note that adhesive sleeves are ONLY for decorative function, not for load-bearing applications. Package includes: 40pcs washers and 80pcs adhesives (Extra adhesives as backup and do not throw them away).
  • SPEC&Application - ID-3/16"(4.5mm), OD-5/8"(16mm), thickness-1/32"(1mm). These adhesive washers work for both wood and metal posts, fit 1/8" 5/32"cable on level applications, ONLY fit 1/8" cable on 30°angle. Please check the image to find the compatibility table for further models. Cable railing kits Muzata CR26 is recommended to work with CR66 to let your cable railing system look neater.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System -We pre-designed a WoodHidden cable railing system to help you get a fully customized project, which includes cable railing kit CR26, angled beveled washer CR60, 1/8” wire rope WR02, adhesive sleeve CR66, protector sl....
Check Stock

Muzata 4Pack Level drilled Cable Railing Post 42 x2 x2 Post Body 39 Adjustable Top Level Line Post Top Mount Stainless Steel Black Finish Wood Concrete Level Deck PS01 BH4L

  • Level line post - This square (2"x2") cable railing post (39" height) is designed for building 42" cable railing projects. It is pre-drilled with 12 level line holes. It can work as both structual end posts and middle posts in level sections.
  • Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, if your project is located near the seaside or humid areas, Muzata aluminum posts PD01/PD02/PW01 are highly recommended for its super strong salt tolerance.
  • Code compliance - This structural post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add an intermediate post between two structural posts. Search Muzata PS11 to get matched rectangular intermediate posts. Pls consult local building offices about the rules since there might be different requirements in some states.
  • Related Posts - You might need several post types to build a complete project: search PS01 BH4L for structural line posts, PS11 BH4L for intermediate posts, PS01 BC4L f....
Check Stock

Muzata 4Pack Level drilled Cable Railing Post 36 x2 x2 Post Body 33 Adjustable Top Post Level Line Post Top Mount Stainless Steel Black Finish Wood Concrete Level Deck PS01 BH4S

  • Level line post - This square (2"x2") cable railing post (33" height) is designed for building 36" cable railing projects. It is pre-drilled with 10 level line holes. It can work as both structual end posts and middle posts in level sections.
  • Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, if your project is located near the seaside or humid areas, Muzata aluminum posts PD01/PD02/PW01 are highly recommended for its super strong salt tolerance.
  • Code compliance - This structural post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add an intermediate post between two structural posts. Search Muzata PS11 to get matched rectangular intermediate posts. Pls consult local building offices about the rules since there might be different requirements in some states.
  • Related Posts - You might need several post types to build a complete project: search PS01 BH4S for structural line posts, PS11 BH4S for intermediate posts, PS01 BC4S &....
Check Stock

Walrkaur 304 Stainless Steel Deck Railing Brackets for 2'' x4''(Actual 1.55'' x3.5'') Railing Wood Post (16pcs)

  • Patent Design - With a flexible separation design, Muzata angle protector sleeves fit 1/8" wire rope and are easy to install on stair railing and ramps at 10 30 35 degrees. If you need angles larger than 35°, pls choose CR69(45°Angle Protector Sleeve). Note: these cable railing kits are ONLY for WOOD posts. Package includes: 40packs angle sleeves, 40packs adhesive sleeves, 80pcs adhesives, 1pc drill bit(9/32").
  • Protective and Decorative Function - These stainless steel protector sleeves help protecting wood post and stainless steel cable from friction wear. Adding these protective sleeves will make it easier to stretch cable through posts and also beautify the rough edges of the drilled holes to create a clean look. Note: It works for wood posts only, not for metal posts.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather. Ideal for indoor and outdoor, even coastal applications subject to high humidity and salt air.【Muzata's Guarantee】: Please feel free to contact us if you find any quality problems after installation. We'll provide you with the most attentive after-sales service.
  • Pre-Designed System - To help you construct a cable railing system, we pre....
Check Stock

Muzata 4Pack Level drilled Cable Railing Post 36 x2 x2 Post Body 35 Fixed top Level Line Post Top Mount Brushed Stainless Steel Wood Concrete Level Deck PS02 LH4S

  • Key feature - This square cable railing post (brushed finish) is designed for 36" residential cable railing projects. It is pre-drilled with 10 pairs of level holes to work on horizontal sections and save your labor. It can act as both structural end post and middle post in level sections. Pls search Muzata DG01 to find matched cable railing gate.
  • Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PD01 PD02 PW01 to find the aluminum cable railing posts.
  • Code Compliance - This structural square post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 or PS12 to find slice or rectangular stabilizer posts to get a broader view. It is important to consult local building offices about the rules since there might be....
Check Stock

48 Pack Swage Lag Screws Left & Right for 1/8\ Cable Railing kit,T316 Stainless Steel Stair Deck Railing Wood Post of Cable Railing Kit, Decking Railing Hardware, DIY Baluster Kit

  • 【LEFT & RIGHT DESIGN】 With the Left hand lag screws and Right hand Lag Screws design, it can rotate wire rope in the same direction, which resolves the problem of twisting the wire rope. Products without Left & right design might damage the cable. The wrench multi-tool is handy, it will help you drill the lag screw into the wood easily..
  • 【PROTECTOR SLEEVES】 These stainless steel protector sleeves will prevent the wire cable from wearing into the post, and maintain the cable rail tension for preventing wire rope vibration..
  • 【COMPATIBILITY】 These Cable Railing Kits are suitable for 1/8" diameter wire rope cable railing system, perfect for DIY your own wood baluster post stair or decking railing project, good for indoor or outdoor applications..
  • 【HIGH-QUALITY 】 Made of premium stainless steel for weather-tough durability, super-strong resistance to rust and corrosion, low maintenance and lasting beauty..
  • 【WHAT YOU WILL GET】 The cable railing kit includes 30 PCS left handed thread swage lag screws, 30 PCS right handed thread swage lag screws, 80 PCS protector sleeves, 2 PCS drill bits (The 6.5mm drill bit is used for drilling the protector sleeves holes, and the 5mm drill bit is used for drilling the lag screws holes), 1 PCS wrench..
Check Stock

Muzata 30 45 90 Degree Multi-Angle Drill Guide with Drill Bits Cable Railing Kit Stair Visible Drilling Template Drill Jig 4 Sizes for Straight Angle Corner Hole Lag Screw for Wood Post CT21, CT1 PG1

  • Multi-Angle and Accurate – This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight holes, 30 and 45 degree angle holes for the wood post. You can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with it. Package includes: 1pc drill guide, 1pc allen wrench, 3pcs set screws, 1pc blowing dust ball, 4 sizes of drill bits：3/16”,9/32”, 5/16”,13/32”.
  • Various hole sizes and Portable- This cable railing drill template guide jig offers 4 different size guide track holes (fit 3/16”, 9/32”, 5/16”, 13/32” drill bit), which are compatible with most cable railing kits hardware. The hole drilled by 5/16’’ drill fit most 1/8″ cable railings lag screws. This drill guide for cable railing is light and small pocket carrying, compact, and easy to carry.
  • Visible and Easy Operate – The handrail drill guide is made of transparent acrylic with excellent visibility that you are easy to lock your selected position on the decking wood post. The fixing metal sleeve of the desired size can be replaced by adjusting the set screw. Use with the attached F clamp and 4 Sizes of drill bits to ensure steady drilling and precise angles.
  • Pre-Designed System – We pre-design....
Check Stock