Best Cable Pin Connector

SATA to 3 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Splitter Y Power Cable 2-Pack

  • 15 pin SATA to 3 x 3 pin / 4 Pin 12V PC case fan splitter Y power adapter cable.
  • Power three 3pin or 4pin (PWM Connector) PC case fan with a 15pin SATA connector.
  • High density black sleeving cable, 10.6 inch length, cable is backwards compatible with standard 3-pin fans.
  • Fans will be operated at the fixed SATA voltage of 12V.
  • SATA to 3 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Splitter Y Power Cable 2-Pack.
Check Stock

YOUKITTY PWM Fan Splitter, 4-Pin Adapter Cable Y Splitter PC CPU Fan Splitter PC 4-Pin Fan Extension Power Cable 1 to 4 Converter 10 inch (2 Pack)

  • Connector 1: 4-pin female connector port..
  • Connector 2: 4-pin male connector (1 of which is 4-pin and 3 of which are 3-pin)..
  • Compatibility: the cable is compatible with all 4-pin and 3-pin chassis fan coolers and with 4-pin and 3-pin PMW fan connectors..
  • Functionality: a 4-pin female connector on one end connects to the motherboard port and a 4-pin male connector on the other end (1 of which is 4-pin and 3 of which are 3-pin) allows 4 computer case fans to be connected to a single motherboard fan header, with the fan distributor cable providing additional fans to increase airflow in your computer case..
  • Parameter specifications: Length 10 inches (25 cm) (approx.). Quantity: 2 pieces..
Check Stock

2 Pack 4-Pin Molex (Actual 2-Pin) to 2 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to Molex Computer Cooler Cooling Fan Splitter Y Power Cable

  • Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer.
  • 4 Pin Molex (Actual 2-Pin) to 2 x 3 pin / 4 Pin 12V PC case fan splitter Y power adapter cable.
  • Power two 3pin or 4pin (PWM Connector) PC case fan with a 4pin molex connector.
  • High density black sleeving cable, 10 inch length, cable is backwards compatible with standard 3-pin fans, Fans will be operated at the fixed Molex voltage of 12V.
  • 2 Pack 4-Pin Molex to 2 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to Molex Computer Cooler Cooling Fan Splitter Y Power (Molex-3Pin/4Pin Cable (Splitter)).
Check Stock

ATX CPU 8 Pin Power Extension Cable CPU 8 Pin Female to 8(4+4) Pin Male EPS-12V Extension Cable for Motherboard 32 Inches TeamProfitcom

  • Connector 1: standard ATX CPU 8 pin EPS-12V female (connect to power supply 8 pin EPS).
  • Connector 2 : EPS-12V 8(4+4) pin male (connect to Motherboard 8(4+4) pin EPS).
  • This cable is compatible with ALL power supplies !!!.
  • EPS 8 Pin Power Extension Cable features one ATX CPU 8 Pin 12V female connector and one 8(4+4) Pin ATX 12V male connector, extending your cable length from the power supply to the CPU motherboard by 32-inches.
  • Length :32 inshes, Gauge:standard 18 AWG - UL1007 , Max Rated power : 500W.
Check Stock

FBHDZVV 4Pin PMW Fan Splitter Cable to 3Pin/4Pin PC Case Fan Sleeved Adapter Cable 1 to 3 PMW Fan Splitter Extension Power Cable Splitter Y Power Adapter Cable PC Computer Cooling Fan Wire Connector

  • The PWM molex fan extension cable for PC motherboard cooling fans are constructed using high-quality material, 10.5 inches cable is strongly braided, sleeved and wrapped to provide long-lasting performance as well as to avoid dust..
  • The PC case fan sleeved adapter cable is designed with a 4-pin (Actual 2-Pin) mol-ex connector on the one end and on the other end it splits into 3 X 3/4-pin connector, the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case..
  • The molex fan connector types of PWM fan extension cable includes one 4-pin(Actual 2-Pin) molx connector and 3/4-pin male plug connector. Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer..
  • Motherboard 4-pin interface, PWM speed control, can be used for multiple cooling fans, expand and expand motherboard 4-pin interface suitable for CPU or computer chassis fan..
  • Molex fan splitter easy to plug, the fan extension cable offers greater flexibility between motherboard and CPU cooling fans.Easily realize the parallel connection of 4-pin PWM temperature-controlled fans, so that the fans can achieve a quieter effect and better heat dissipation..
Check Stock

Cable Matters 2-Pack 3 Way 4 Pin PWM Fan Splitter Cable - 12 Inches

  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans.
  • PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans.
  • PWM fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans.
  • 3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans.
  • Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer.
  • Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with t....
Check Stock

2 Pack 4-Pin Molex to 3 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin / 4-Pin (PWM Connector) to Molex Computer Cooler Cooling Fan Splitter Y Power, Molex-3Pin/4Pin Cable Splitter

  • Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer.
  • 4 Pin Molex to 3 x 3 pin / 4 Pin 12V PC case fan splitter Y power adapter cable.
  • Power three 3pin or 4pin (PWM Connector) PC case fan with a 4pin molex connector.
  • Fans will be operated at the fixed Molex voltage of 12V. High density black sleeving cable, 10.6 inch length, cable is backwards compatible with standard 3-pin fans.
  • 2 Pack 4-Pin Molex to 3 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin / 4-Pin (PWM Connector) to Molex Computer Cooler Cooling Fan Splitter Y Power, Molex-3Pin/4Pin Cable Splitter.
Check Stock

Cable Matters 2-Pack ATX Power Supply 4-Pin CPU Extension Cable - 8 Inches

  • PSU to mobo CPU extension cable lengthens the connection between an existing power supply and the P4 connection on a motherboard.
  • 4 pin CPU extension cable extends the power connector from a 12V ATX power supply to a motherboard CPU power connection.
  • Cable management solution for connecting an older power supply to a new motherboard in a bottom mount computer case.
  • PC builder essential cable for ATX power supplies that ship with a short 4 pin CPU power cable.
  • Cost-effective 2-pack provides a spare cable to keep in your toolkit.
  • Sturdy ATX PSU extension cable has a male 4-Pin P4 connector and a female 4-pin P4 connector with latches for a secure connection to prevent accidental disconnections.
  • Compatible with popular ATX power supplies such as the Antec Basiq BP350 350 Watt Power Supply, Logisys Corp. 480W 240-Pin Dual Fan 20+4 ATX Power Supply, Rosewill 350-Watt Power Supply.
Check Stock

OwlTree 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard 10.6 inch

  • Compatible: work with motherboard with ATX 4 pin, 8 pin or 8+4 pin ports.
  • Connector A: EPS 12V 8 Pin CPU Female Connector. Connector B: ATX 12V 8 Pin (4+4 Detachable) Male Connector. Connector C: ATX 12V 4 Pin Male Connector.
  • Length: 10.6inch/27cm, UL1007 18AWG, 34*0.178TS Tinned Copper Wire, Higher Quality than Regular Cable.
  • Solution: The CPU 8 Pin Female to CPU 8 Pin (4+4) +4 Pin Male Cables provide a good solution for the motherboard required 8+4 pin ATX ports,Compatibility: Compatible with all PSUs - ATX, SFX, Fanless PSU.Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket..
  • This cable only works with motherboard, not PCI-Express video cards. Serious damage can be caused if your use it in place of PCI-Express video cards..
  • Package: 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male CPU Power Adapter (10.6in).
Check Stock