Best Cable Hole Cover Plate

1-1/2 Inch Cable Grommets Petal-Shaped Buckle Type Wire Hole Cover for Cord Management and Protection of Cabinet, 5PCS 38mm

  • Package include 5x wire hole grommets, suitable for metal plate/wooden board/acrylic board with thickness less than 3.2mm..
  • Made of nylon material with fire rating 94V-2, safer to use..
  • The bottom diameter of the coil is 37.3mm (applicable to 37.4~38.8mm openings), the top panel diameter is 41.7mm, the middle hole diameter is 8.5mm, and the cable grommets can extend through a maximum diameter of 29mm..
  • The petal-shaped design helps prevent the cable from shaking, and the buckle design on both sides can better install and fix the wire protection gasket..
  • The cord hole cover is commonly used in scenarios where cables such as cabinets and electrical equipment pass through panels, which can effectively organize and protect cables..
Check Stock

AIMADI 10.23 Inch Single Hole Cover Deck Plate for Kitchen Sink Faucet

  • Kitchen Sink Faucet Hole Cover Deck Plate.
  • Allows single hole kitchen faucet to be installed on 3 hole sink.
  • This stainless Steel is constructed of high quality stainless steel,ensuring quality.
  • premium surface treatment, keeps the escutcheon resist scratches.
  • The deck plate enough to cover all the unused 2 or 3 outer holes of your kicthen or bathroom sink,the single hole faucet can be installed on 2 or 3 hole sink.
Check Stock

ORICO Desk Grommet, 4 Port USB 3.0 Hub, 5Gbps Data Transmission with 4.9ft Cord for Diameter 2.36" or 60MM Hole, Office Accessories, for PC, Flash Drive, HDD Enclosure and Other USB Devices

  • ... Fits 2.36" Standard Grommet Hole: Only fit for 2.36"/60mm standard grommet hole, please make sure your desk hole diameter is 2.36" before purchasing..
  • Easy to Installation: Follow the operation steps to put the hub into the table hole. And it can detach the cable hole so that the big plug of the data cable can be passed through, which is a more user-friendly and practical design. Plug and play and support hot plugging. In addition, the blue LED light can easily show its working status..
  • Dustproof and Cover: It can be hide into the table hole when not use by the cover plate insert fits into the outer sleeve to prevent all ports from dust. Cables neatly feed through your desk, work surface, sales counter etc..
  • It can be swiveled away to allow multiple cables to pass through..
Check Stock

2 Pcs Stainless Steel Kitchen Sink Tap Hole Cover ，Kitchen Faucet Hole Cover ，Faucet Hole Cover，Sink Tap Hole Cover，Kitchen Faucet Hole Cover Stainless Steel (1.2 to 1.6 Inch in Diameter)

  • Material: Sink Tap Hole Coveris made of durable stainless steel and plastic,to prevent rusting ​and will not fade ，Can be used for a long time。.
  • Applicable size： Kitchen Faucet Hole Cover for holes between 1.2 to 1.6 inch. The thickness of the sink should be less than 0.4 inch. (This is not long enough for granite counter tops) Most household Kitchen Sink Hole Cover are standard sizes.please check its size before buying..
  • Easy to install：Kiut the sink hole cover stainless across the faucet hole, then under the sink, tighten the bottom screw,It covers the spray hole, no need tools, Kitchen Sink Tap Hole Plate Stopper Cover ​is equipped ​with a rubber gasket to achieve a good seal and avoid leakage..
  • Stainless Steel Kitchen Sink Tap Hole Cover device is decoration and leakage prevention,preventing water from leaking onto the floor,keep the kitchen clean and tidy.Kitchen Sink Tap Hole Plate Stopper Cover very small, which convenient to store and don not take too much space..
  • We believe that our Premium Sink Tap Hole Cover，will exceed your expectations. If you have questions, please contact us any time. We will try our best to solve your problems..
Check Stock

SMALLRIG Mounting Plates and HDMI Cable Clamp for Atomos Ninja V CMA2338

  • ▶ Multiple Threaded Holes: Both the top plate and the bottom plate are mounted to the monitor by a 1/4’’-20 screw and two locating pins.
  • Multiple 1/4’’-20, 3/8‘’-16 holes and an ARRI locating hole are also provided.
  • ▶ HDMI Cable Clamp Plate:The HDMI cable clamp plate is mounted to the monitor side by two M3 screws.
  • The HDMI cable clamp works with a range of Atomos cables protecting both the cable and port.
  • ▶ Built-in NATO Rail: On the top and bottom plates are integrated NATO rails for quick release of monitor by SMALLRIG Ballhead Arm 2071 or 2072.
  • ▶ Compatibility with Atomos Master Caddy II: For backwards compatibility with Atomos Master Caddy II, this kit also features Drive locks that incorporate the additional size of standard 2.5’’ drives into the its form factor.
Check Stock

Rexka 20pcs 10mm Hole Bumper Engine Cover Fender & Grille Clips Compatible with Subaru 909140007 Baja Forester Impreza Legacy Outback Tribeca 2011-2000

  • Other Names:Under Cover Clip, Grille Clip, Fender Liner Clip, Splash Shield Clip, Fender Liner Retainer Clip, Lower Cover Clip, Sight Shield Clip, Cover Clip, Reinforced Beam Clip, Side Cover Clip, Bumper Cover Retainer Clip, Lower Bracket Retainer Clip, Fender Liner Retainer, Suspension Cross-Member Clip, Wheelhouse Liner Retainer, Grille Assembly Clip, Plate Clip, Pad Clip, Bumper Cover Fastener, Reinforcement Fastener, Guide Clip, Side Retainer Rivet, Upper Quarter Trim Fastener..
  • Upper Seal Clip, Corner Support Clip, Protector Clip, Under Cover Retainer Clip, Upper Bracket Clip, Grille Bracket Clip, Lower Bracket Clip, Retainer Plate Clip, Upper Plate Clip, Bracket Clip, Fog Lamp Assembly Clip, Side Bracket Retainer Clip, Upper Cover Retainer Clip, Cover Plate Clip, Hole Cover Clip, Pillar Trim Clip, Closure Panel Clip, Spoiler Clip, Protect Shield Clip, Backup Lamp Clip, Duct Clip, Outer Cover Clip, Bumper Cover Retainer, Bumper Cover Side Bracket.
  • Replaces Subaru: 90914-0007 Fits: Subaru: Ascent, B9 Tribeca, Baja, BRZ, Crosstrek, Forester, Impreza, Legacy, Outback, Tribeca, WRX, WRX STI, XV Crosstrek.
  • Head Diameter: 21mm Stem Length: 15mm Fits Into 10mm Hole.
  • This is the most common Clip for Subaru cars. Commonly Used in Front Bumper, Front Grille,....
Check Stock

COOLWEST Deck Plate 10Inch for Single Hole Kitchen Sink Faucet Commercial Kitchen Faucet Hole Cover Escutcheon Stainless Steel

  • Faucet Deck Plate: Durable stainless steel construction, ,ensuring quality and longevity, brushed stainless steel finish..
  • 3Hole Cover Plate: 10” deck plate enough to cover all the unused 2 or 3 outer holes of your kitchen sink. Resists scratches, corrosion and tarnishing..
  • Compatible all kitchen faucets with 1 3/8" faucet base, allows single hole bathroom or kitchen faucet to be installed on 2 or 3 hole kitchen sink..
  • Easy to Install: easy to install with all single hole kitchen faucet,please refer to dimension chart for details..
  • Reliable Quality: 30 days money back through amazon, 12 months replacement. Any issue, please feel free to contact us from your order directly..
Check Stock

BWE Faucet Cover 10 Inch Deck Plate for 1 or 3 Hole Kitchen or Bathroom Sink Faucet Brushed Nickel Outside Escutcheon Plate Stainless Steel Plate Round Vessel Vanity Base Sink Hole Cover Round

  • Stainless Steel Construction:This faucet cover is constructed of solid stainless steel,ensuring quality and longevity,and plate with premium surface treatment, keeps the escutcheon resist scratches.
  • Perfect match:,the faucet hole cover matchs most single hole kitchen sink faucet and 1-3 hole bathroom sink faucet,the single hole faucet can be installed on 2 or 3 hole sink.
  • Easy maintenance:The deck plate with high quality brushed nickel finish,corrosion and rusts,It can be cleaned only by a soft cloth,that will not fade or tarnish over time.
  • Easy to install:The faucet plate includes a foam gasket for light sealing,it can be directly install and use,you can install it by yourself without any tools..
  • Suitable Size:The length of the escutcheon plate : 10.2.
Check Stock

Wi4You Cable Wall Plate 2 Pack Decotive Recessed Wall Plate with Easy Mount Wings Side Opening for Low Voltage Wall Plate WI1010-2

  • Recessed cable wall plate is for wires and in wall cable management kit - low voltage wall plate, effective Cable Hider for TV, hide wires in wall behind the flat TV or other electric media.
  • Single Gang cable pass through wall plate Side opening cable management wall plate - Recessed outlet wall plates for cables management, 1 gang wall plate for wall cable pass through.
  • Smart mount wings multimedia cable wall plate - easy mount cable cover, no additional bracket needed, perfect for wall wire pass through, great solution for data cord outlet.
  • ABS cable wall plate pass through - the 1-Gang wall plate is made of non-broken ABS material, solid low voltage cable pass through wall plate.
  • Pack & Warranty - 2pcs 1 Gang ce tech low voltage recessed cable plate for TV.
  • Serach "Wi4You" for more single gang wall plate solution.
Check Stock