Best Butane Heat Shrink Gun

MECCANIXITY Battery Wrap PVC Heat Shrink Tubing 150mm Flat 1.5m Blue Good Insulation for Battery Pack

  • PVC heat shrink wrap tube can be used for big battery or battery pack protection, such as 18650, 21700, AA, AAA battery packs. Battery wraps can be....
  • The PVC heat shrink wrap tube is in size of: 150mm(6-inch) flat width, 1.5m total length, -40°C to +105°C(-40°F to +221°F) temperature range,....
  • Battery wrap tube is with good insulation, can not only wrap and protect the battery pack, prevent dust for the battery pack, but also beautify the....
  • Steps of intallation:1.Prepare heat shrink tube, cut it to the length you want.
  • Notice: Hot air gun is usually used as heating tool. When using the hot air gun to heat, pay attention to move back and forth to make the heat shrink....
Check Stock

Mini Hot Air Gun, 300W Portable Heat Gun for Embossing Shrink Wrapping Paint Drying Crafts

  • Product dimension: 9-in x 1.7-in. The wire length of the heat shrink gun is 39-in. Built in a heat sink makes the internal temperature of the hot air gun is reduced and life is prolonged..
  • Material: the mini heat gun is made of high-quality ABS plastic exterior and stainless steel inside, portable, simple and durable..
  • Function: the portable hot air gun heats up in seconds and quickly gets hot temperature up to 200°C/390°F. Please DO NOT make it work more than 8 minutes in one time, also please DO NOT get too close to the material..
  • Application: NEX heat shrink gun Comes with an additional replaceable protecting cap, it's great for rubber stamp, embossed powder, heat shrinkable film, heat shrink tubings and drying paint, etc..
  • Customer First: any issue about the product, please do not hesitate to reach out to us, we will be glad to assist you!.
Check Stock

Shrinkfast 998 Heat Gun, 200000 BTU Propane Heat Gun, Ready to Use with 25' Hose, Regulator, Hard Case, and Wrench Made in the USA

  • Shrinkfast 998 Heat Gun has up to 260,00 BTUs of power, which can easily heat and shrink materials such as polyolefin (PO), polyethylene (PE), shrink wrap, polyvinyl chloride (PVC), and more. The 998 can allow you to bend and weld plastics as well..
  • Sleek design which can be handled easily. It weighs only 2.2 lbs and is considered very light compared to competitive heat guns. It was designed for excellent balance, operator comfort, and quick and simple usage..
  • The Shrinkfast 998 Heat Gun Kit includes the heat tool, 25' propane hose, adjustable regulator, wrench for tightening fittings, high-impact-plastic carrying case and an owners’ manual. The manufacturer’s recommended regulated pressure is 22.5 PSI. We also provide a full 1-year manufacturer’s warranty on parts..
  • The heat gun is very lightweight, durable, and suitable for a variety of jobs. This heat gun is perfect for crafters, DIYer, or handymen. It's also durable and powerful enough to be used on professional jobs..
  • The Shrinkfast heat gun has a wide range of applications, there are so many uses for a heat gun from domestic and crafty, to car maintenance and home improvement. Heat gun is ideal for shrink wrapping, removing old wallpaper, paint strippping, plastic & tarpaulin welding, and oth....
Check Stock

FloweryOcean 300W Mini Heat Gun 200℃ Handheld Portable Hot Air Gun and 328 Pcs Heat Shrink Tubing for Shrink Wrapping Epoxy Resin Supplies Embossing Crafts Candle Making Phone Repair DIY Pink

  • 【Classic Design】: Pencil shaped handle and non-slip design, light weight, make the heat gun fit comfortably in your hand. Retractable bracket....
  • 【High Efficiency】: 300W mini heat gun tools with two vents at the end, can quickly reach 200℃/392°F in seconds, mini heat gun is especially....
  • 【Safety Usage】: Adopted high quality ABS material, stainless steel inside makes this hot air gun more safe and durable, heat gun tools with nozzle....
  • 【Widely Used Heat Gun】: Can be used for crafts, epoxy resin supplies, shrink packaging, candle making, embossing, watercolor drying, shrink....
  • 【Professional 328 pieces heat shrink tubing】: Manufactured from high quality thermoplastic polyolefin and offer excellent electrical properties. 8....
Check Stock

Heat Gun for Crafts, Huepar Tools 446°F/752°F Mini Dual Temp Hot Air Gun Tool for Shrink Wrapping, Embossing, Candle Making, DIY, Including 164PCS Heat Shrink Tubes, 2 Silicon Brushes and 2 Nozzles

  • 【Various Accessories】(1) 164PCS heat shrink tubes of different sizes help you better complete the shrinking work.
  • (2) 2 Silicon brushes make it easier to evenly apply resin and epoxy resin to the flash cup.
  • (3) Fishtail nozzles and hook nozzles can handle different situations, such as Shrink Wrapping, Vinyl Wrap and Shrinking Tubes. A variety of accessories can be combined and matched to make your handicrafts convenient and efficient..
  • 【Variable Speed & Heat】 Huepar Tools mini heat gun HG35 has dual temperature and speed settings - 446°F(230°C) low speed & heat for delicate or detail work.
  • 752°F(400°C) high speed & heat for heavy duty or high volume work. Two different adjustable temperatures allow the HG35 mini hot air gun to meet your different work requirement..
  • 【Powerful Motor and Fast Heat Dissipation】The HG35 mini heat gun has a high-power motor, which can quickly heat up in a short time. 446°F(230°C) low speed & heat can reach 180L/min, 752°F(400°C) high speed & heat can reach 250L/min. The hollow design on both sides of the tail of the heat gun can ensure the rapid heat dissipation of the product..
  • 【Ergonomic Design】The HG35 mini heat gun has a streamlined design, compact, lightweight & low-noise. The sides of the fuselag....
Check Stock

Pointool Heat Shrink Tubing Kit-Wire Shrink Wrap Tubing Wire Heat Shrink Tube Kit Insulation Electrical Colored Assorted Heat Shrink Tubing Assortment Electronics for Wires Shrink Ratio2 1,650Pcs

  • MULTIPLE SIZES AND COLORS-Contain any size you may need for anything from professional repair to DIY work at home, so the shrink tube is very convenient when working with different size wires. You may not use these wire shrink wraps a lot, but when you do, there's always a size that comes in handy. This heat shrink tubing kit affords wide variety of sizes and colors, especially the smaller size which hardest to find..
  • SHRINK QUICKLY, DURABLE and EVENLY-This shrink tube is well made of high quality material, thick and durable. Cover the area with them and shrinking them with a heat gun, then the wire shrink wraps will wrap the wire tight and evenly within 10 seconds. With this heat shrink tubing kit you will become more confident in your soldering work..
  • EASY TO USE-You can just shink the shrink tube with a lighter or hair dryer when you don't have a heat gun on hand. Of course, if you'd like to use the heat shrink tubing kit more professional, standard heat gun will be much better lol. The wire shrink wraps are all pre-cut into the most common sizes you'll need which makes your work a lot faster..
  • KEEP ORGANIZED-The heat shrink tubing comes in a nice compact case and the semi-modular container keeps each size separately. You can throw the heat shrink tu....
Check Stock

IRONWALLS Digital Hot Air Gun with LCD Display & 4pcs Nozzles, 650W Mini Heat Shrink Tubing Gun Portable Heat Gun with 212-896°F Adjustable Temperature & Airflow for Electronic Repair, Shrink Wrapping

  • 【Light Weight Heat Vinyl Shrink Gun Kit】The overall dimension of IRONWALLS mini heat gun is 12” x 2.36” (30.5cm x 6cm), 1.3lbs Light weight, compact size for comfortable holding, flexible working and effectively reduce the fatigue of holding. Besides, the removable bracket stand allows it stand stably for hand-free operation or mounted on wall for convenient storage..
  • 【650W Fast Heat Heat Gun for Crafts】Equipped with 650W powerful motor, this heat gun for soldering can be fast heated in seconds and be switched freely from 212℉(100℃) to 896℉(480℃), wide temperature range & high efficiency..
  • 【High Accuracy Temperature & Airflow Dual Setting】The temperature (from 212℉ to 896℉) and the air volume (MAX.:120L/min) can be easily & precisely adjusted, which is best for precision soldering or desoldering jobs and can satisfy different needs of different projects. What’s more, the LCD digital temperature display is for easy & clear reading when operating..
  • 【Safe & Reliable Digital Heat Gun】Built-in cooling fan, when the heat gun for resin shutting down but not cutting of the power, the fan will work automatically until the temperature of the device return to normal statue, preventing the device damaging from overheat and avoid sc....
Check Stock

Mini Heat Gun, 350W/662°F Hot Air Gun with 6.56Ft Long Cable-HGP35AC

  • ...t tool due to the excellent scientific ergonomic design which can prevent repetitive strain injuries and other musculoskeletal disorders.
  • Non-slip rubber grip makes your hand comfortable and easier to hold the product tightly..
  • Easy and Long Endurance: Just put on plug and turn on switch, then starting to work. heat shrink gun can be used for 250 hours constantly because of its long endurance which is the guarantee of your successful project..
  • Wide Application and Product Service: With the reflector nozzle, you can use the small heat gun for shrink wrapping, epoxy resin, crafts, vinyl wrap, wire connectors, candle making, shrink tubing, embossing, phone repair, electronics, remove painting, shrink tubing, defrost, remove mud dirt and so on. PRODUCT SERVICE: if you have any questions about our product in 2 years, please contact us, we are happy to help..
Check Stock

Heat Shrink Tubing Kit + Mini Heat Gun for Shrink Tubing - 328pcs 2:1 Wire Shrink Wrap Tubing + 300W Heat Shrink Gun with Storage Box - for Shrink Wraping,Wire and Cable Repair,Insulation Protector

  • The kit includes 328pcs, 5 colors, 8 sizes of heat shrink tubing, A 300W small heat gun, A storage box that can be divided into DIY compartments for storage and carrying, You can DIY the box to store other items..
  • The heat shrink tube is made of polyolefin, which has excellent flame retardant, insulation, acid and alkali resistance, high temperature resistance, anti-aging, and durability. Environmental protection meets RoHS standards, 2:1 shrink ratio, tight shrinkage, and good airtightness after heat shrinking..
  • The air outlet of the hot air gun is made of stainless steel, which Will not be damaged by high temperature. The outer shell is made of ABS plastic, and has a convex anti-slip design, light and small in size, and comfortable to hold. Designed with a metal bracket, it can be easily placed on the table without causing any objects to come into contact with the high-temperature air outlet..
  • The heat gun has a fast heating speed, the highest temperature can reach 200 ℃, it is easy to realize the heat shrink tube wrapping. The rear part of the heat gun is designed with a heat dissipation port, which can quickly dissipate heat and effectively extend the service life of the heat gun..
  • You can use the kit for electronic data line protection, Wire and c....
Check Stock