Best Bushing Fittings

SJZBIN 4pcs Brass Lock Nuts Pipe Fitting 1/2\ NPT Female Lock Nut Gasket NPT Female Brass Flange Hex Lock Nut

  • Easy installation: 1/2" NPT female lock nut for connecting tank fittings, etc..
  • Function: Precision machined threads and the relative softness of brass ensure reliable installation of the bushing reducer for a tighter seal..
  • Wide range of applications: for plumbing applications and connections, for various measurable devices, collectors, garden and water connections, etc..
  • Package list: 4 pieces of brass locknut washers..
Check Stock

T TANYA HARDWARE 1/8 x 1/4 Brass Hex Bushing Female Pipe x Male Pipe NPT Pack of 10

  • Hex bushing for connecting two pipes with different diameters.
  • Male NPT threads on one end and female NPT threads on the other for connecting pipes with different ends.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Brass Pipe Reducing Bushings are designed for use in water, oil, natural gas, and steam applications..
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

HUZTL Fuel Shut Off Valve Two-Way Replaces for 1-633347 Hustler 745059 Scag 482212 E633347 Zero Turn Lawn Mower ZTR Garden Tractor

  • ✅ Two Way cut off valve replaces for EXMARK 1-633347, HUSTLER 745059, SCAG 482-212.
  • ✅ 1/4" fuel shut off valve for Yazoo 102679 Rotary 11273 ZTR Mowers.
  • ✅ Dual tank switching valve replaces for Husqvarna Electrolux Jonsered 539102679 ZTR.
  • ✅ Gas Fuel Shut Off Valve 1/4" Barb Fittings, Two-Way, Dual Tank Configuration, On-OFF-On.
  • ✅ Package include: 1 shut off Valve,2 Fuel Filter, 4 Hose Clamps, 2 Fuel Tank Bushing Grommet.
Check Stock

GTW 6" Double A-Arm Golf Cart Lift Kit for Club Car DS Gas/Electric 1982-2003.5

  • [Easy Installation] Our No Cutting and No Weld Design makes for an easy bolt on application | Easy to Follow FULL COLOR Instructions Included.
  • [Adjustable Camber & Toe] Complete with pivot point grease fittings for easy maintenance.
  • [A Better Ride] The lift kit Increases suspension travel providing a smoother off-road experience | 6 inch Lift Allows up to 23" Tall Tires.
  • [Sleek & Strong] Durable urethane bushing with a high gloss black powder coated finish.
  • [Important Note] Must have Metal Steel Dust Covers on Front Hub to Fit.
  • if cart has plastic dust covers, alternate lift kit is needed.
Check Stock

2-Pack Besosay Brass Reducer Hex Bushing Threaded Pipe Fitting 1 Inch NPT Male x 3/4 Inch NPT Female Adapter

  • ✅ SPECIFICATION - Standard brass pipe fitting 1" NPT male to 3/4" NPT female reducer adapter. For connecting pipes with different ends size..
  • ✅ MATERIAL - This brass reducer bushing adapter is made of high quality brass for corrosion resistance, high temperature ductility and low magnetic....
  • ✅ EASY INSTALLATION - The deep threads design allows the fittings to be better engaged with the object to enhance fixation, and the smooth threads....
  • ✅ OPERATION PRESSURE & TEMPERATURE - Max. Pressure: 150 PSI ,Temperature range：-65 to 250 F..
  • ✅ PLEASE TAKE NOTICE - This pipe fitting can not be installed for potable water use. And, NPT thread size does not actual diameter, it is only....
Check Stock

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
  • The OEM Tools bushing driver set includes 20 different size cups for versatile use.
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
  • Don’t have to remove components from vehicles with this bushing tools set.
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
  • Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
  • Cups with bushing press and pull kit allow for hundreds of combinations.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check Stock

JKS 2018-2020 Compatible with Jeep Wrangler JL 2020 Gladiator JT Quicker Disconnect Fits 0-2.0' Lift JKS2032

  • Special Notes:Not compatible with aftermarket swaybars, Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel..
  • Fits vehicles with 0-2.0" Lift Only, Includes a pair of frame mounted retention brackets to keep the links and sway bar in place when disconnected, Gain up to 30 percent more axle articulation by disconnecting your front swaybar, Dramatically improve off-road performance on stock or modified Jeeps.
  • Variable length design adapts to your vehicle and future modifications, Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation, Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces.
  • Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability.
  • Costs far less than lockers, tires, lift kits, and other accessories with comparable performance benefits.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
Check Stock