Best Bus Bar Connector

Sintech M.2 NVMe SSD Adapter Card for Upgrade 2016 2017 13" MacBook PRO A1708 Non-Touch Bar Models(Only For Late 2016-Mid 2017 Year)

Notice:It can't support recovering from internet for first time installing,important to prepare bootable USB disk driver(M.2 PCIe has no OS systerm inside,it must be erased first). Because Mac OS software's bug, pls unplug power cord from USB 3.1 port if Macbook can't reboot..
Only Fit 2230/2242 type key M nvme M.2 SSD, does not supports SATA bus key B/B+M SSD.
Compatible with MacBookPro13,1 (Late 2016) and MacBookPro14,1 (Mid 2017) Non-Touch Bar Models only.
Connects to a PCIe 3.0 x4 slot with the 22+34 pin connector.
Notice: Before you buy it, pls confirm if your Macbook PRO is A1708 Non-Touch Bar model..

PARALLEL CONNECTION KIT : Contains 2ea 120w solar panel, 1 pair of 6feet 10awg solar extension cable and 1 pair of solar y branch connector, you can....
INNOVATIVE TECHNIQUE -- BougeRV 120 Watts portable solar panel innovative adopted the 9BB (9 Bus-Bar Cell) mono solar cell, promoting significantly....
PORTABLE -- Adjustable kickstands, twist latch and protective bag included, the solar panel is foldable, which is easy to set up and easy to pack up,....
WATERPROOF -- BougeRV 120W lightweight solar panel consists of EVA, monocrystalline cell, PET and superior metal frame, which is meet the IP67....
COMPATIBILITY -- Solar connector to DC adapter conversion cable included, the 120w solar panel can charge any generator with DC 7909/ DC 5521 input....

WORKING RATING - Power stud size: 1/4".Maximum working voltage is DC 48V & up to 150 Amps.The battery bus bar is measured 1.77" x 1.69" x 1.4"..
EASY TO USE - Each bus bar with a cover can prevent short circuits and is completely safe.The cable can be installed with a wrench without removing the cover..
DURABLE & DEPENDABLE - The bus bar has good electrical conductivity and corrosion protection for durability.Terminal block's material is stainless steel, insulated base..
EFFICIENTLY DISTRIBUTE POWER - With these power distribution block, you can organize your wiring cleanly and keep your environment clean and tidy..
APPLICABILITY - Battery junction block is widely used in motorcycles, cars, trucks, RVs, etc..

【Size】It is a solid bar of copper: 12''L x 1''W, 0.24'' thickness and weight is 14.11 ounces, no more no less, good size for the electrical project you're looking for..
【Material】Copper flat bar is made of copper, grade as C-110. It's thick enough and conducts heat well, so burn through is mitigated, if you need something to soak up heat this works well..
【Features】Easy to cut and drill, and work great for your intended use. My uncle easily fabd a bus bar system for his new X-S-3400s, good investment compared to custom machined pieces that are 3-4x the cost..
【Copper 110 Flat Bar】It would carry current with no issues and work well for your project such as make a bud bar for electrical project, or bus bar for battery connections..
【Application】Copper flat stock is suitable for various milling, craft, lathe, knife project, battery terminal L brackets, home solar battery bank, or others electrical engineering..

The lynx power in module is used to connect batteries via an external fuse, It can be useful if you have multiple parallel strings.
The Power In contains a negative and positive DC bus-bar with M8 bolts in which to connect batteries cables.
It can take cables up to 22 mm in diameter through the bottom entry guides, and no limit via the two side connections.
A modular DC bus bar, the Victron Lynx Power In is used to connect batteries to the Lynx DC distribution system.
Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.

The 1W LoRa MicroMod Function Board adds LoRa capabilities to your MicroMod project. It is intended to be used in conjunction with a MicroMod processor board and a MicroMod main board, which provides the electrical interface between a processor board and the function board(s)..
Utilizing the 915M30S LoRa module from EBYTE, which is a 1W (30dBm) transceiver based around the SX1276 from Semtech. There is a robust edge mount RP-SMA connector for large LoRa (915MHz) antennas.
with modification, a U.FL connector is also available. We've successfully tested a 12 miles line-of-sight transmission with this module (user results may vary)..
Board Features: M.2 MicroMod Edge Interface, Keyed Screw Slots, RP-SMA Antenna Connector, Configurable U.FL Antenna Connector. MicroMod Peripherals Used: 5V Power.
1W 915M30S LoRa Module Features: Based on SX1276 chipset from Semtech.
modulation: LoRa, FSK, GFSK, MSK, GMSK, OOK.
Data Rate: FSK: 1.2 - 300kbps, LoRa: 0.018 - 37.5kbps.
Note: A MicroMod Processor, Main Board, and antenna are not included with this MicroMod LoRa Function Board. These parts will need to be purchased separately.

1Pcs c110 copper flat bus bar, 3mm x 25mm x 5.91 inch / 150mm, about T 1/8" x W 1".
Copper flat bars are widely used for electrical applications for the high electrical and thermal conductivity. Due to its exceptional strength, ductility and corrosion resistance, copper flat bar is also typically used in architectural applications. Uses of copper flat bar include automotive, construction, machined components, roofing, industrial, electrical, fabrication, engineering, manufacturing, marine equipment, architecture industries.
As a factory seller, we would like to accept any customization about the copper bar, including the length, drilling and bending or any other special needs, please contact us.
The copper bar is made of 0.999 copper, which is the C110 Cu, we also provide tinned copper bar and Nickel-plated copper bar.
Copper bars are also called copper bus bars or copper buss bars. They are made of copper and have rectangular or chamfered (rounded) rectangular cross-sections. (Nowadays, rounded copper bars are generally used to avoid tip discharge). The circuit plays the role of conveying current and connecting electrical equipment. Sometimes it can also be made as crafts or decorations.

Brass terminal grounding strip bus bar block with 8 screws & 2 Stud.
High quality plastics base ensures great mechanical strength and durability.
Use M4 screws to fix it in place through the two screw holes on both ends of the terminal.
Widely used in power distribution cabinets, distribution boxes,mechanical equipment factories,electrical equipment factories,etc.