Best Bulkhead Barbed Fittings

4 Pack PVC Bulkhead for Rain Barrels 3/4" Male 1/2" Female, Winspeed Double Threaded Bulkhead Water Tank Connector with Thick Silicone Seal Water Tank PVC Connector Adapter for Pools, Aquariums, Tub

【Durable 3/4" Male 1/2" Female Bulkhead Fitting】Our bulkhead fitting is made of high-quality PVC, equipped with 2 rubber rings for better sealing, which is colorfast, has no crack, and no peel as well as lasts longer than ordinary plastic fittings..
【Efficient Water Tank Connector Fitting】The bulkhead fitting adapter is made of high-quality PVC, which is colorfast and durable. Bulkhead fitting comes with a silicone seal gasket for better sealing performance. Keep your bucket with fresh rainwater season after season and can also drain the bottom of the tank impurities..
【What You Get】4 pcs 3/4" male 1/2" female bulkhead fitting and 8 pcs thick silicone seal gaskets. It can be very convenient for your daily life. You can share these good tools with your family and friends.（Please confirm the size before ordering！）.
【Easy Installation】The compression bulkhead fittings are super easy to operate and quick to install, first drilling 25-26mm holes in the tank for installation, and assembling the bulkhead and hose adapter. It is suitable for household, commercial and industrial use..

Check Stock

Joywayus 1/4 NPT Female 1/2 Male Brass Bulkhead Fitting Bulk Head Pipe Fitting Bulkhead Tank Fitting Coupler

Gasket and nut for air tight seal through bulkhead..
Joywayus female coupler for connecting 1/4" NPT fittings through a bulkhead..
Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)..
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
This bulkhead fitting is suitable for connecting brass, bronze, or iron hydraulic lines through a bulkhead..

Check Stock

Hourleey Brass Rain Barrel Quarter, Rain Barrel Spigot Kit 1/2 inch, Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting

High quality: Heavy-duty solid brass bulkhead fitting, screwed along the 1-1/8 inch internal thread all the way, with spigot installed at both ends. Heavy-duty 1-1/8 inches, no kinks, right-angle rotating solid brass ball valve..
Two installation methods: Front mounting and rear mounting of brass bulkhead fittings..
Applicable scenarios: Bulkhead fittings need to be installed with 1-inch diameter holes, suitable for the case where the wall thickness does not exceed 1.3 inches..
Tools required for installation: Electric drill, 1-1/8 inch hole saw, pipe wrench or adjustable wrench..
Intimate help: For helping you easily install the rain barrel quarter and effectively prevent leakage, we provide a gasket..

Check Stock

LIFEGARD Aquatics Standard Threaded Bulkhead Kit for Fish Aquariums – High-Impact Resistant PVC – Includes Bulkhead Fitting, Gasket, Lock Nut – Jet Black – 2 Inch

ELIMINATE AQUARIUM LEAKS: Eliminate the possibility of finding hidden cracks when filling aquariums with this double threaded bulkhead fitting kit from Lifegard Aquatics..
HIGH-IMPACT RESISTANT PVC BULKHEAD: Made with only the most durable and high-quality materials, this heavy wall bulkhead is molded with impact-resistant PVC and features a slip base..
JET BLACK BULKHEAD KIT: Properly attach plumbing to fish and coral aquariums with this bulkhead fitting kit that includes a jet black bulkhead fitting, gasket and lock nut..
MATCH ACRYLIC TANK BACKGROUNDS: Ensure plumbing is in place for your aquariums without distracting from the aesthetics with this Lifegard Aquatics double threaded bulkhead kit for fish aquariums and tanks..
YOUR GO-TO RESOURCE FOR AQUARIUM, POND & AQUACULTURE PRODUCTS: Lifegard Aquatics features an extensive line of high-quality aquaculture products that include fountains, pumps, bulkhead fittings and commercial aquatic and pond equipment. From crystal aquariums to full spectrum LED lighting, trust in Lifegard for all of your aquatic needs..

Check Stock

Jevrench 3/4 Inch PVC Bulkhead Fitting, Durable Threaded Bulkhead Water Tank Connector for Rain Barrels, Aquariums, Water Tanks, Tubs, Pools (3/4 Inch, 1PCS)

☘️BULKHEAD FITTING SIZE: bulkhead fitting is 3/4 inch FHT（refers to The bulkhead female thread size）, connector size is 53x 47 mm/2.1 x 1.85 inch, The lock nut is reverse threaded with 4 mm thick silicone gasket that will adjust to the shape of the round barrel, the right size can meet most of your needs and they will work well..
☘️EASY TO INSTALL: The bulkhead fitting is easy to operate and quick to install, first drilling 1-1/2 inch holes in the tank for installation, assembling the bulkhead and hose adapter together, suitable for home, commercial and industrial use.
☘️STRONG AND DURABLE: The bulkhead fitting adapter is made of high quality PVC, which is colorfast and durable, and lasts longer than ordinary plastic fittings，and it comes with a clear silicone gasket for better sealing performance..
☘️ESSENTIAL TOOL: PVC Bulkhead Fitting fits most rain barrels, water tanks, ponds, or aquariums, it is durable and convenient..
☘️OUR SERVICE: We will always put customer satisfaction at the first. If there are any problems with our PVC bulkhead fitting, please contact us and we would be very happy to solve your problems..

Check Stock

TAISHER 2PCS Black PVC 1-1/2 Bulkhead Tank Connector Adapter Fitting with Gasket for Water Tank Rain barrels Aquariums Bathtubs and Sink

Product Type: Bulkhead Water Tank Connector, suitable for installation in water tanks, water towers, buckets, fish tanks, etc..
Product material: Made of PVC, strength, durable, will not fade, fall off and crack，These fittings are not allowed be installed for potable water use.
Sealing: Threaded connection and embedded gasket form a tight seal, not easy to slip and leak..
Easy to install: Can be installed in walls, tanks or panels. The bulkhead design makes it easy for accessories to pass through the holes..
[Please note] When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

Check Stock

Outus 3/4 Inch PVC Bulkhead Fitting and Garden Hose Adapter Kit for Rain Barrels Aquariums Water Tanks

Specifications: size is 3/4 inch, material is PVC, applicable models is universal for most rain barrels, water tanks, ponds, or aquariums.
Package include: garden hose kit includes 3/4 inch PVC bulkhead fitting and 3/4 inch PVC garden hose adapter for rain barrels, water tanks, or aquariums, they are good tools.
Durable: will not fade, crack or peel, durable and longer lasting PVC versus standard plastic bulkhead fittings.
Easy to install: drill 1-3/8 inch or 1-1/2 inch hole to install, assemble the bulkhead and hose adapter together, threaded from the front end, commercial and industrial use.
Function: locking nut is reversed threaded, the bulkhead fitting with 4 mm thick premium silicone seal gasket that will contour to the shape of the round barrels.

Check Stock

Beduan 1 FPT Bulkhead Water Tank Connector Stainless Steel Thru-bulk Fitting

1" Female bulkhead connector for water tank, water inlet and outlet, and self-made water storage barrels..
Bulkhead OD 41mm, suitable for about 42mm/1.65 inch ID hole..
Can be mounted in water tanks, water towers, water inlets and outlets, self-made water storage buckets, rain buckets, and can also be used in various pipes, hoses, pipe fittings or faucets. Bulkhead design to make the fitting easy through holes without leakage..
Made of stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
Includes a body, gasket, and locking nut..

Check Stock

PVC Barbed Tee Fitting - 3/4 PVC Tee Barb Fitting - 3/4 Inch Barbed Insert Tee - Hose Barb Fittings for Tubing Hose Water Line - SCH 40 Barbed Hose Tee Fitting – Barbed Tee PVC Fitting

TOP QUALITY: The water line barbed fitting tees are carefully manufactured under strict quality guidelines and in full compliance with ASTM. Only the highest-grade PVC materials are used offering you the best durability.
MEASUREMENTS: 3/4 Inch barbed Insert x 3/4 Inch barbed Insert x 3/4 Inch barbed Insert barbed tee. Pipe Fitting Class is Sch 40 with Max. Temp of 140 F. Max Pressure 200 psi @ 72 Degrees F. Tee Fitting Connection Type is Insert x Insert x Insert.
WIDE APPLICATION: PVC Barb Tee Fitting can be used for running water lines as flexible tube and hose fittings at home, RV or any commercial plumbing systems.
EASY TO INSTALL: PVC tee hose fittings are lightweight and require no professional knowledge. The fitting process is simple and effortless. PVC can be cut, shaped, welded and joined easily.
MADE IN USA: Our PVC hose connectors are produced in US and have clear environmental advantages over traditional materials - 100% recyclable with increased wear resistance.

Check Stock