Best Brazing Alloys For Copper

20 Sticks Aluminum Welding Rods ，20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉，Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

• 【Closed Packaging】 GEOYLE brazing rods portable transparent sealed tube packaging, package contains 20 extra long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
• 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
• 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
• 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
• crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
• 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all....

Forney 48571 Super Sil Flo Brazing Rod, 1/8-Inch, 1/2-Pound

• Super Sil-Flo brazing rod is a brazing alloy that is ideal for large and small copper tubing installations.
• Typical applications are refrigeration control valves, joining copper wires to rotor bars, electrical connections.
• T joints, wage joints and sleeves, couplings on return bends and condenser fitting.
• Sil-flo is not recommended for ferrous metals such as iron or steel.

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

• MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
• ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
• PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
• APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
• SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..

Uniweld KCHP Cap n Hook Brazing/Welding Outfit Tanks Not Included

• Professional contractor grade portable oxyacetylene welding and brazing outfit-tanks not included (sold separately).
• Cap'n hook five flame tip for brazing up to 1" copper tubing-u's Patent no. 4,191,333.
• Welding/brazing tip for brazing up to 1" copper tubing and welding up to 1/8" steel.
• Centurion series regulators with Protective rubber gauge boots.
• Front valve welding handle with stainless steel ball point valves for accurate Gas control.

MTF-5 Cap'n Hook 5-Flame Tip

• Five flames with 100% wrap around heat for easy brazing of copper tubing..
• Capable of brazing up to 1" copper tubing..
• Hook tip made of tough, durable stainless steel to protect against bending.
• Proudly made in the USA and 100% flame tested..
• Fits Uniweld's welding handles Part# 71 or Part# WH550.

Amprobe TH-3 Relative Humidity Temperature Meter 2 Display

• Air/Acetylene Soft Flame Kit has always been the Old Reliable flame tool for plumbers.
• Produces a precise 2700 Degrees Fahrenheit target heat for soldering and brazing copper tubing.
• Capable of soldering up to 1/2 inch and brazing up to 3/8 inch copper tubing with supplied tip.
• Torch Handle with rear control valve for accurate gas control and positive shutoff.
• Acetylene Regulator for MC Tank with protective rubber gauge boot.

Lucas-Milhaupt 99088 Flux Cored Aluminum 822

TIG Welding Tungsten Electrodes 2% Lanthanated Blue WL20 10-Pack 1/16

• PERFECT for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and stainless steel.

Witonics Capacitor Replacement Kit for Hyundai X93W with Soldering Tools

• Professional contractor grade oxyacetylene welding and brazing outfit.
• Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
• Single stage Patriot series regulators with protective rubber gauge boots.
• Front valve welding handle with stainless steel ball point valves for accurate gas control.
• Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.