Best Brass Threaded Fitting

RAINPAL RBS024 Brass Rain Barrel Spigot (LF Compliant 3/4' Quarter Turn Ball Valve w/ Bulkhead Fitting and Thread Tape, 7 GPM)

Top Feature: Large 13mm Flow Port (7GPM), Large 3.5 inch Stainless Steel Handle. Freeze Proof.
ATTENTION: REVERSE THREADED FITTING NUT, Turn CLOCKWISE to LOOSEN..
3/4" Solid Brass Quarter Turn Valve w/ Brass Female 3/4" Bulkhead Fitting.
FEATURES: Lead Free Compliant Brass, Quarter Turn Ball Valve, Large 3.5" Stainless Steel Handle, Stainless Steel Nut, Freeze Resistant, Large Flow Port(7 GPM tested with 2 ft water), Recessed Rubber Gasket won't Pop Out.
SPECS: Bulkhead fitting need 32mm or 1-1/4 inch diameter hole to install. Fit up to 0.4 inch Thickness Wall(Works great for 55 gallon used plastic drum barrels on craigslist). Large 13 mm Port, Heavy and Heavy Duty, Net Weight: 11.5 oz.
Compare Design, Compare Material, Compare Weight, Compare Build Quality, and Choose RAINPAL, Life Time Warranty Against Leak, Break or Crack..

FUNCTION - This 3/4" Barb x 3/4" NPT brass fitting is an adapter for connecting a hose to a male threaded pipe. Hose barb on one end and male NPT threads on the other..
DURABLE - As a solid and sturdy material, brass is perfect for hose systems as it can withstand long periods of wear and tear..
THREAD - High quality and deep threads allow the fittings to bite better, not easy to slip..
MEDIUM - This pipe fitting can apply to water, air, gas, oil and fuel..
WARNING - This product can expose you to chemicals including lead(~2.85%), which is not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

FUNCTION - This 1/4" Barb x 1/4" NPT brass fitting is an adapter for connecting a hose to a male threaded pipe. Hose barb on one end and male NPT threads on the other..
DURABLE - As a solid and sturdy material, brass is perfect for hose systems as it can withstand long periods of wear and tear..
THREAD - High quality and deep threads allow the fittings to bite better, not easy to slip..
MEDIUM - This pipe fitting can apply to water, air, gas, oil and fuel..
WARNING - This product can expose you to chemicals including lead(~2.85%), which is not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Rust Proof Design: with Brass Body and Stainless Steel Handle..
Leak Proof Design: Thick and Strong Gasket in Groove, Make a watertight seal..
Free Proof Design: Thick Brass Body withstand Expansion when Freezing.
Lead Free Compliant Brass, Suitable for Potable Water.
Heavy Duty 4.0 oz Solid Brass Bulkhead Fitting, Female 3/4" NPT Threaded on Both Ends, install spigot on either end. Heavy Duty 6.0 oz 3/4" No Kink Quarter Turn Solid Brass Ball Valve with Garden Hose Hook Up.

...ass hook end for pulling, 1 brass eye end for pulling, 1 magnetic end for fishing, 1 rounded brass end for pushing,1 Cable Pulling extension cord parts fitting.
SPECS: 19 rods, length: 240-Inches , diameter: 3/16” - Flexible acrylic add-on: 6-1/2” – Male/Female brass threaded connectors: 4mm - Kit contains hook & eye ends, and a plastic storage case..
QUALITY: The stiff feeder poles are made of high quality nonconductive sturdy fiber glass with solid brass connectors & eye/hook ends, and a bendable acrylic extension..
DESIGN: Highly visible yellow shafts simply screw together with special threaded ends extending the tool up to 24Ft., with an acrylic bar that flexes to any angle and a hook and eye attachment making pulling and pushing cables a breeze..
USES: The joints are useful for electricians, builders, crafters, engineers, DIY’s when fishing electric, coaxial, CCTV, alarm, network, circuit, phone, audio speaker lines, video, HDMI, internet CAT5e, & CAT6 cables through thin exterior or interior drywalls, vents, suspended garage ceilings, attics, straight cond....

A QUALITY SPIGOT FOR YOUR RAIN BARREL. Make use of the water collected from your rain barrel easily. This spigot is designed to provide a strong water flow by relying on pressure from the water in your rain barrel. The 3/4" spigot is threaded for easy use with a hose- no need to haul buckets or watering cans..
NO LEAKS. The attached washer and silicone tape provide a perfect waterproof seal, and the bulkhead fitting and spigot are reverse-threaded, and self tighten- which ensures the spigot will not accidentally loosen from use, and will hold a tight seal over multiple seasons..
INSTALLATION SO QUICK, YOU'LL BARELY HAVE TIME TO GET YOUR DRILL OUT. The bulkhead fitting and spigot are reverse-threaded, and are tightened from the outside of the barrel- no need to fiddle inside with a wrench. Simply drill a hole, and thread the attached wire down through the hole then slide the bulkhead fitting down the wire as a guide- works well for barrels with and without open top design. The product also comes with a detailed, illustrated guide..
HEAVY-DUTY, DURABLE CONSTRUCTION. From using a brass ball valve and body and aluminu....

...dditional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different diameters. Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or fitting with different diameters Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..

Connects low-pressure hose to threaded pipe with a ball swivel for an adjustable angle.
Fitting connects to hose on one end and has an NPT male connector on the other.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).

Standard 1/4 npt to 3/8 barb for connecting a hose to a male threaded connection of a different diameter..
Brass material make it strongest construction for prolonged service life,Easy to use and reliable..
Hose barb on one end and male NPT threads on the other, no leaking and durable, easy to connect and disconnect..
Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads..
Package include 2 Pack 3/8" Hose ID x 1/4" NPT Male Pipe brass fittings..