Best Brass Rule

Best Friend Services Pet Urn - Memorial Cremation Pet Urns for Dog and Cat Ashes, Hand Carved Mia Series Urn for Pets up to 25 lbs (Small, Pewter, Double Brass Paws)

  • CAPACITY- Total capacity is 25 cu/in accomodating most pets up to 25 pounds. The rule of thumb is 1 cu/in per 1lb of live weight. Capacity required depends on how the ashes are processed. Most crematoriums process to a consistency similar to sand which is what this is based on..
  • DIMENSIONS- Overall Height = 3 , Overall Width = 4 , Lid Opening = 2 ?, Wall Thickness 1/16.
  • STRUCTURE - The urn is CAST OF SOLID BRASS with a threaded screw top design allowing for simple secure sealing of your pets ashes. Paws are carved by hand making each memorial slightly unique.
  • SOPHISTICATED FINISH- Overall color is achieved by a plating process which creates a refined smooth even finish over the brass. Paws are plated to bring out the brilliant brass color. The finish allows engraving by your local engraving or jewelry shop..
  • URNS KEEP THE MEMORIES ALIVE - You shared your pet's life, pet urns keep you pet close and the memories alive in your home.
Check Stock

T-Rule, Precision Marking T-Rule 6'',Precision Woodworking Tools T-Square 6'',Stainless Steel Positioning Scribbling Gauge, Carpenter Mark T-Rule

  • 【Save You time】Micro-fine marking holes slot at every 1/16-, 1/32-, and 1/64-inch scale position.Locate your sharp pencil or scribe with absolute precision.This T-Rule work beautifully to draw lines exactly where you want them to be, which is very suitable for woodworking and will be a good helper for you..
  • 【Clearly Identifiable Scale】The T-rule finishing features low glare and protective powder coated. It has permanent deep markings and graduations for max Readability. This is a T-Rule which can give you higher accuracy,clearer scale,better line drawing..
  • 【Durable and sturdy】The Stainless Steel T-rule is made of good quality Stainless Steel 304, durable and sturdy.
  • A good measuring tool, easy and convenient to use.The stainless steel T-Rule of combination square has deep etching scale for superior legibility and long-lasting usage..
  • 【Wide application】Our combination T-Rule for marking or measuring that's simultaneously set to every scale position with perfect, instant accuracy.a useful measuring tool for carpenter,designers,architects,engineers, and so on.
  • Suitable for woodworking,decoration,etc..
  • 【Precision Marking T-Rule】You can easily use this Precision Marking T-Rule to meet your need. If there are any issues, just contact us ....
Check Stock

Bulwark Deluxe Insulated Bib Overall, Excel FR ComforTouch, NAVY, RGXXL

  • 6.0 oz., 93/5/2 Nomex Aramid/Kevlar Aramid/Other Fiber.
  • Two-way concealed Nomex taped brass break-away zipper, concealed snap at top of zipper and at neck / Mandarin style stand-up, two-way safety collar.
  • Concealed snap closure on sleeve cuff / Elastic waist inserts / Two front swing pockets are topstitched and lined / Two patch chest pockets with flaps and concealed snap closure / Two patch hip pockets have single concealed snap closure / Left sleeve pocket.
  • Deep-pleated action back / Side vent openings with snap closure / Rule pocket on right leg / 360° visibility with front and back 2" yellow/silver/yellow reflective striping that is CSA compliant.
Check Stock

Bulwark FR mens Flame Resistant 6 Oz Nomex Iiia Premium overalls and coveralls workwear apparel, Navy, 44 US

  • This CAT 1 FR/AR garment provides a Arc Rating of ATPV 4.4 calories/cm² and is UL certified to be NFPA 2112 compliant. | Two-way concealed Nomex taped brass break-away zipper, concealed snap at top of zipper at neck | Two patch chest pockets with flaps concealed snap closure, left sleeve pocket a rule pocket on right leg | FABRIC Flame resistant, 6 oz. (205 g/m²) Nomex IIIA BLEND 93% Nomex Aramid/ 5% Kevlar Aramid/ 2% Other Fiber | Imported of Fabric Made in USA.
Check Stock

General Tools CF678MED Precision Flex Rule

  • General Tools and Instruments CF678MED Precision Flex Rule, 6 In., 3/4 In. Wide, 1/8-1/16/-1/32 and 1/64 is a ruler is for machinists.
  • The markings are ultra fine black for easier reading and deciphering.
  • The rule is 6 Inch long and has a width of 3/4 Inch.
  • Features a polished stainless steel finish.
  • The graduations of measure are 1/8, 1/16/, 1/32 and 1/64 inch.
Check Stock

Keyhole Companion – Hang Objects w/Keyhole Slots Perfectly without Measuring; Tools Mark the Keyhole Slot Fastener Locations on Walls, etc. Mount pictures, frames, power strips, keyhole hangers, etc.

  • High Quality: Made of premium wood and brass, strong and durable, high hardness and rust-proof, long-term use, light weight and easy to carry..
  • Adjustable Width: 8inch/200mm long with double sided and three nails, , single needle is suitable for most types of marking, the maximum length is 4.1inch/105mm.
  • double needle is suitable for marking wide double lines, the minimum length is 0.2inch/5mm, and the maximum length is 1.8inch/45mm..
  • Great Design: The guide rule uses a brass slide rail, which increases the slip resistance and wear resistance, and helps to adjust the distance between the two needles accurately. The rotatable handle can easily adjust the distance between the two needles..
  • Wide Application: The cutting gauge can be used for amateur DIY and professional purposes, mainly for marking, scribing, laying various woodwork or other wood products..
  • Attension: The needle is sharp, please do not touch it. This scribe is only suitable for wood scribing. Please do not use it for marking materials other than wood, otherwise it may cause irreversible damage..
Check Stock

General Tools CF1264 Ultra Test Flex Steel Rule

  • General Tools and Instruments CF1264 Ultra Test Flex Steel Rule, 12 In., 1 In. Wide, 1/8-1/16-1/32 and 1/64 is a ruler is for machinists.
  • The markings are ultra fine black for easier reading and deciphering.
  • The rule is 12 inches long, and has a width of 1 inch.
  • The graduations of measure are 1/8, 1/16, 1/32 and 1/64 inch.
  • Features a plastic sleeve for corrosion prevention and a hard satin chrome finish.
  • The rule is 12 Inch long and has a width of 1 inch.
Check Stock

General Tools CF1845 Ultra Test Rigid Steel Rule

  • General Tools and Instruments CF1845 Ultra Test Rigid Steel Rule, 18 In., 3/4 In. Wide, 1/32-1/64-1/10 and 1/100 is a ruler is for machinists.
  • The markings are ultra fine black for easier reading and deciphering.
  • The rule is 18 inches long, and has a width of 3/4 inches.
  • The graduations of measure are 1/32, 1/64, 1/10 and 1/100 inch.
  • Features a plastic sleeve for added corrosion protection, and a hard satin chrome finish.
  • The rule is 18 Inch long and has a width of 3/4 Inch.
  • Features a plastic sleeve for added corrosion protection and a hard satin chrome finish.
Check Stock

Marhynchus Cutting Gauge Woodworking Project Kits Marking Tools Mark Scraper Scribers Ebony+Pure Copper 8 inch Line Drawing Measuring Tools Scribing Gauge

  • MATERIAL: The cutting ruler is made of ebony, and its thumb screw is made of brass, which is super durable and long life..
  • WITH FIXING SCREWS: The cutting rule fixing screws can be firmly locked and stable operation, providing you with sturdy and efficient work..
  • APPLICATION: The cutting gauge can be used for amateur DIY and professional purposes, mainly for marking, scribing, laying various woodwork or other....
  • FEATURES: The cutting gauge is miniature, lightweight and portable, yet ergonomically designed for gripping..
  • SATISFACTION GUARANTEE: The product is 100% brand new and high-quality. We care for every customers feeling. You can get in touch with customer....
Check Stock