Best Brass Push In Fitting

SharkBite UC256LFA10 3/4

  • ELBOWS: SharkBite fitting 3/4 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems..
  • AFFORDABLE: Low cost solution to connect PEX Pipe Tubing.
  • COMPATABLE PRODUCT: Use with SharkBite PEX Clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. The SharkBite connection system is perfect for your next commercial or homeowner plumbing project..
  • LEAD FREE: All SharkBite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.
  • QUALITY: Only SharkBites quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
Check Stock

mistcooling 160PSI Misting Pump (220 V-AC)

  • Specs: 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push- lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle..
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings..
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75 degree F - UV Resistant Flexible Tubing - Black Color - UV Treated..
Check Stock

RapidAir Compresed Air Piping System Push-to-Connect 1/2'-NPT Adapter

  • Nickel plated brass fitting guards against corrosion.
  • Use only with Rapidair 1/2 in. OD x 3/8 in. ID nylon tubing system.
Check Stock

Dixon Valve BPN23 Brass Push-On Hose Fitting, 3/8\ NPTF Male (Dryseal) x 1/4\ Hose ID Barbed

  • Push-on fitting are intended for use with Lok-On (push-on style) hose only.
  • Lok-On fitting will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
  • 3/8-inches NPTF male and 1/4-inches hose ID barbed.
Check Stock

Dixon Valve BPN252 Brass Push-On Hose Fitting, 1/4\ NPTF Male (Dryseal) x 5/16\ Hose ID Barbed

  • Push-on fitting are intended for use with Lok-On (push-on style) hose only.
  • Lok-On fitting will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
  • 1/4-inches NPTF male and 5/16-inches hose ID barbed.
Check Stock

Beduan Brass BPL Push to Connect Air Fittings Elbow 1/4\ Tube OD x 1/8\ NPT Male 90° Degree Adapter (Pack of 5)

  • Type:Push in fitting/Push to connect /Size:1/4 " Tube OD x 1/8" NPT Thread.
  • Fluid Admitted:Air Vacuum Water (no freezing).
  • Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC.
  • Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Nickle-Plated Brass /Body:Nickle-Plated Brass.
  • Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg.
Check Stock

SharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, Pack of 12, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U058LF

  • SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
  • can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite 3/4 Inch x 3/4 Inch x 1/2 Inch Reducing Tee, Pack of 6, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U412LF

  • SHARKBITE BRASS PUSH REDUCING TEE: This push-to-connect fitting can be used when joining two different-sized pipes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing tees work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass reducing tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this reducing tee can withstand 200 degrees F and 200 PSI.
Check Stock

Utah Pneumatic Push To Connect Air Line Fittings 1/4'Od Union Straight Tube Connector Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic Tube Fittings Plated Brass Push (5 Pack)

  • SPECIFICATION: Acceptable Fluid : Air And Water Pressure Range: Max Working Pressure: 2mpa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE Hose Push Connect Air Fittings Push Fitting.
  • Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models of push in connector are designed to suit your pneumatic piping needs perfectly.
  • Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
  • It's important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All push to fit, contains internal hexagonal holes.
  • this enhances the installation of the push connect fittings process in a narrow space.
  • These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Straight Air We Are Committed To....
Check Stock