Best Brass Close Valve

3/4 Brass Electric Solenoid Valve 110V AC Normally Closed Water air Diesel by U.S Solid

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

1/4 NPT Brass Electric Solenoid Valve 12VDC Normally Closed VITON Standard USA Pipe Thread Solid Brass Direct Acting Viton Gasket Solenoid Valve by U.S Solid.

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

Litorange 1 Pack Lead Free Brass Mini Ball Valve Shut Off Switch, 1/4 inch Compression by 1/4 Compression Fitting

  • ★ Size: 1/4 inch compression x 1/4 inch compression valve..
  • ★ 180 degree valve closing range, the handle can close the valve by rotating it to either side of the valve body.
  • ★ Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • ★ Package include: 1 PCS 1/4 inch compression x 1/4 inch compression. Comes with 1 year warranty..
Check Stock

Litorange 2 Pack Lead Free Brass Mini Ball Valve Shut Off Switch 1/4 inch Compression by 1/4 Compression Fitting

  • ★ Size: 1/4 inch compression x 1/4 inch compression valve..
  • ★ 180 degree valve closing range, the handle can close the valve by rotating it to either side of the valve body.
  • ★ Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • ★ Package include: 2 PCS 1/4 inch compression x 1/4 inch compression. Comes with 1 year warranty..
Check Stock

WADEO Valve Core Remover Tool HVAC with Dual Size SAE 1/4 & 5/16 Port, 20 PCS Valve Cores with Teflon Seal, 5 PCS Brass Nuts and Valve Core Rod, Compatible with R410A R32 R22 R12 R407 R404 R600

  • Upgraded Valve Cores: The bottom of our valve cores are golden yellow, strong resistance to fluorine and heat, has longer service life than ordinary valve cores.
  • Great Design: This hvac tools are mainly made of brass, it has a ball valve that can be opened and closed in just a quarter-turn. (No Gas Loss). Anti-slip design increase hand friction, prevent all kinds of overpowered valves.
  • High-quality craftsmanship probes, rugged and durable, suitable for most equipments. ality craftsmanship probes, rugged and durable, suitable for most equipment..
  • Package Include: 1*Valve Core Remover Wrench, 1*R410 R32 Brass Adapter, 20*Valve Cores, 5*brass nuts, 1*Valve Core Rod.
Check Stock

Motorized Ball Valve- 1/2\ Brass Ball Valve with Full Port, 9-24V AC/DC and 2 Wire Auto Return Setup by U.S. Solid

  • SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
  • The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
  • NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the bore in the ball is a full1/2”.
  • This minimizes pressure loss through the valve.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • Limit switch minimizes power after valve is fully open.
  • Ideal for projects where an automatic return is necessary.
  • 2 WIRE AUTOMATIC RETURN SETUP- Simple two wire connection, valve largely de-energizes after opening.
  • Returns to fully closed if power is removed.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock

AYIVG Bathroom Square 12 Inch Rainfall Shower Faucet System With 6 PCS Body Jets Mixer Set (Wall Mount, Brushed Gold)

  • COMPLETE KIT: Including 12 inch Square rain shower head（304 stainless steel）, handheld shower head（Brass）, 16 inches shower arm（Brass）, 59 inch shower hose（304 stainless steel），shower holder（Brass）, shower mixer control valve（Brass）,6 Pcs shower body jets (Brass) ..
  • STANDARD THREADS: Shower bracket holder,shower arm and shower mixer valve are 1/2" NPT threaded. Standard U.S. connection size, ensuring easy and fast installation..
  • EASY OPERATION: Single lever design for effortless flow and tempreture control. You can switch the knob to open rain shower head ,body massage jets or handheld shower head as you like (can not both together)..
  • RELIABLE CERAMIC CARTRIDGE: The ceramic disc cartridge can survive 500,000 times open & close test. Sophisticated ceramic engineering provides both convenience and control precision.Ensuring a long service life..
  • 5 YEARS WARRANTY :100% SATISFIED GUARANTEE: Any reason makes you dissatisfy with this shower system, let us know and we will make it right, Full Refund or a Free Replacement, whichever you prefer..
Check Stock

Motorized Ball Valve- 1/2\ Brass Electrical Ball Valve with Full Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid

  • SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
  • The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
  • NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the bore in the ball is a full 1/2”.
  • This minimizes pressure loss through the valve.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • No power expended once fully open or fully closed.
  • 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock

3/4\ NPT 2PCS Lead Free Full Port Forged Brass Ball Valve, Full Port Heavy Duty Brass Ball Valve Shut Off Switch for Water and Oil

  • Made from high quality H90 brass, this brass ball valve is robust and durable. In this respect, it is the ideal plug valve for high quality shut-off valves in the chemical and food industry or in the home or garden. The sides of the dispenser have female threads in accordance with ISO 7-1 (EN 10226-1) M-M..
  • The internal passage of the drain tap is straight for optimum and complete passage and therefore has a low flow resistance. The permissible operating temperature is -25°C + 180°C and the maximum working pressure is 40 bar.
  • The lever handle mounted on the top is used to close and open the ball valve, easy to use, pressure free or no pressure. The spherical seal is made of PTFE for maximum stability and durability even at very high temperatures..
  • Ball valves are widely used in mechanical equipment, industrial equipment, water supply and drainage equipment, for example in gardens, water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc..
  • This high pressure ball valve can be used as a rotary valve for steam, saturated steam, hot water, or as a plug valve for heating. The ball valve is suitable for pressures up to PN 40. The spindle is fixed in the relief area and the valve has an ant....
Check Stock