Best Brass Air Tube Fitting

Beduan Brass BPL Push to Connect Air Fittings Elbow 1/4\ Tube OD x 1/8\ NPT Male 90° Degree Adapter (Pack of 5)

Type:Push in fitting/Push to connect /Size:1/4 " Tube OD x 1/8" NPT Thread.
Fluid Admitted:Air Vacuum Water (no freezing).
Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC.
Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Nickle-Plated Brass /Body:Nickle-Plated Brass.
Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg.

AIR LINE TUBING - Outer diameter: 1/4 inch.
Length: 20 feet. The red air line tubing is made of nylon that is light and flexible. The max working....
EASY INSTALLATION - All the fittings are designed with PTC (push-to-connect). Hose installation is done by pushing the tube into the hole until the....
UNIOn TEE - It can be used to tie a set of air springs together for a single path installation. Push-to-Connect fitting for easy connection to air....
INFLATION VALVE - Two schrader valves are made of brass that is for maximum strength and durability. Designed to inflate or deflate manually your air....
ELBOW FITTINGS - The elbow fittings are connected with 1/4” air tube. One head is 360 swivel 1/4” FNPT thread and the other head is 1/4” push to....

Components: 30FT x PE Misting Tube, 1 x 1"-3/4” Tap Adaptor, 1 x Joiner Fitting, 1 x Elbow Fitting, 1 x Tee Fitting, 1 x Misting Elbow, 6 x Misting Tee, 6 x Brass/SST Misting Nozzle, 1 x Auto Drain Valve, 5 x Clip Strip, 10 x Nail Clamp.
Easy assembly. Leak-proof drain valve. High quality UV treated tubing, resistant to yellowing hydrolysis. Great for cooling your outdoor living areas - The Misting Nozzle is made of precision brass/stainless material with foggy spraying for cooling..
Fits US standard tap thread. If you are buying from the country other than USA and Canada, please contact us first for further information..
Cooling - The outdoor cooling system provides a cool environment for your favorite outdoor area, reducing the ambient air temperature about 6°C (20°F)..
Wide application - atomization cooling system is widely used in gardens, trampoline water parks, landscaping, greenhouses, humidification, outdoor cooling systems, swimming pool atomization cooling, etc..

Size:3/8" Tube OD. Package included: 50pcs Compression Ferrule Sleeve. It is packed in plastic box to avoid product damage..
This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Suitable for the outer diameter of the pipe:3/8"..
Product Material: Brass. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
Sleeve for a tube compression insert fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..
Package included: 40pcs Compression Insert. It is packed in plastic box to avoid product damage..

Suitable for the outer diameter of the pipe:5/16"..
Product Material: Brass. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
Sleeve for a tube compression insert fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..
Package included: 40pcs Compression Insert. It is packed in plastic box to avoid product damage..

SPECIFICATION: Acceptable Fluid : Air And Water Pressure Range: Max Working Pressure: 2mpa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE Hose Push Connect Air Fittings Push Fitting.
Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models of push in connector are designed to suit your pneumatic piping needs perfectly.
Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
It's important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All push to fit, contains internal hexagonal holes.
this enhances the installation of the push connect fittings process in a narrow space.
These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Straight Air We Are Committed To....

Adatta per PU / PA / PE / PVC 1/4" tubi OD.
Medium: Air, Operating Pressure: 0- 150 PSI, Working Temperature: 32～140°F..
Package includes: 12 PCS Elbow Connect Fitting Connectors 12 PCS Straight Connect Fitting Connectors.

This Joywayus compression fitting is made of brass..
Connects to 4mm copper,brass,aluminum,or plastic tubing..
Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..