Best Brake Piston Wind Back Tool

Cartman 12pc Heavy Duty Disc Brake Caliper Tool Kit Universal Front and Rear Brake Piston Tool Screw-in Wind Back Rewind and Piston Compression Forces or Rotates Pistons into Calipers

Caliper Wind Back Disc Brake Pad Piston Compressor Tool.
12pcs kit for brake pad replacement- rotating piston into the caliper for proper fit.
Ideal for rotating piston back into caliper and exposing new pads.
Constructed for professional mechanics, built to last even through years of service.
Come with Brand New in Blow Molded Carrying Case.

Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

...ERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
Press bearings and races into an open hub wheel assembly on most European and American cars.
Some tools in the kit are disk brake specific, such as the caliper piston retractor.
If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
EASY STORAGE: No longer will you need to worry about yo....

Check Stock

YSTOOL Pneumatic Brake Caliper Piston Wind Back Compression Spreading Tool 23PCS Kit Rewind Spreader Air Tool Set to Repair Brake Pad Change Brake Pump for Cars Trucks

Brake caliper tool set comes with a brake compression tool and 22 drive key disc adapters, making it a easy job to push the brake caliper piston back without others' help. YSTOOL pneumatic brake pad caliper tool fits for a variety of domestic and foreign vehicles with windback pistons and push back pistons, performing services on many brake repair jobs like brake pump regulating, brake pads replacement, etc..
YSTOOL brake tools are compatible with Ford, Alfa Romeo, Audi, BMW, Citroen, Fiat, Alfa Romeo, Honda, Range Rover, Jetta, Jaguar, Subaru, Mazda, Mercedes, Mitsubishi, Nissan, Renault, Saab, Iveco, Toyota, Volvo, VW, etc. Just choose one adapter, connect the brake piston caliper tool to shop air, press air trigger(til the end) and rotate swivel rod to rewind brake piston, then release pressure before tool removal by pressing air release button..
Compared with manual brake caliper spreading tool, pneumatic brake caliper tool is more laborsaving, convenient and environment-friendly. Only one tool is needed to satisfy for use with left and right hand threaded pistons by rotating the long swivel handle freely, no need to gather two sets of left and right hand thrust bolt assemblies and waste time to try which one is right. YSTOOL caliper piston re....

Check Stock

Spurtar Brake Caliper Press Tool Brake Caliper Tool Spreader 4 in 1 Universal Disc Brake Caliper Compression Tool Ratchet Piston Spreader Automotive Tools for Car Brake Repair Installation Blue

MULTIFUNCTION 4-1: Spurtar Brake Caliper Compression Tool is ideal for automotive brake pump adjustment. Works on single piston, dual piston and quad piston, as well as single and twin piston floating calipers.
RATCHETING: Automotive brake caliper centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
360-DEGREE RATCHETING: Ratchet technology of this Brake Caliper Tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
EASY TO USE: This caliper piston tool extended reversing lever allows for easy change from spreading to retracting. Cushioned grip handle provides comfortable and easy grip.
BUILT TO LAST: Constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum strength and durability, which is an useful brake tools for automotive replacement brake system parts.

Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Blue

【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
【Comfortable And Durable】This brake....

Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Red

【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
【Comfortable And Durable】This brake....

Check Stock

ATPEAM 24PCS Disc Brake Caliper Tool Set Wind Back Tool Kit for Brake Pad Replacement Reset

Easy Operation: For brake pad replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies..
Durable Material: Carbon steel construction with a rust-proof blasted finish, these blades will stand up to heavy use and accidental drops. It’s perfect for everyone from DIY novices to professional mechanics..
Wide Application: This multi-disc brake caliper wind back tool kit includes 18 adapters fitting hundreds of vehicle makes and models including American, European, and Japanese.
Package Included: 18 x Disc Adapters (#0, #2, #3, #4, #5, #6, #7, #8, #9, #10, #A, #E, #F, #K, #K1, #K2, #M, #N).
2 x Handed Thrust Bolt Assemblies (Left & Right).
Blue Blow Mold Case: The Disc Brake Piston Caliper Compressor Rewind Tool Set is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..

Check Stock

ATPEAM 24pcs Heavy Duty Disc Brake Caliper Tool Set and Wind Back Kit for Brake Pad Replacement

Durable Material: Carbon steel construction with a rust-proof blasted finish, these blades will stand up to heavy use and accidental drops. It’s perfect for everyone from DIY novices to professional mechanics..
Easy Operation: For brake pad replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies..
Package Included: 18 x Disc Adapters (#0, #2, #3, #4, #5, #6, #7, #8, #9, #10, #A, #E, #F, #K, #K1, #K2, #M, #N).
2 x Handed Thrust Bolt Assemblies (Left & Right).
Wide Application: This multi-disc brake caliper wind back tool kit includes 18 adapters fitting hundreds of vehicle makes and models including American, European, and Japanese.
Black Storage Case: The Disc Brake Piston Caliper Compressor Rewind Tool Set is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..

Check Stock

ABN Universal Front and Rear Caliper Disc Brake Screw-in Wind Back Rewind and Piston Compression 12-Piece Tool Kit Set

QUICKLY FIT BRAKE PADS: Use the ABN Universal Caliper Disc Brake Screw-In Wind Back Rewind and Piston Compression 12-Piece Tool Kit Set to replace....
COMPATIBLE: Universal for all screw-type calipers that require the piston to be wound back into the housing (not compatible with hollow pistons).
BUILT TO LAST: Constructed from all steel for strength and longevity.
Adaptor plates with thrust bolt assembly and reaction plate are made with....
EASY STORAGE: Heavy-duty 14” x 11” x 3” inch (35.6cm x 27.9cm x 7.6cm) plastic blow-molded carrying case for easy transportation, safe storage,....
CONTENTS: Package includes (1) holder, (1) main body, (10) adapters, and (1) carrying case.

Check Stock