Best Brake Pedal Ball Joint

Glodorm Upgrade Mod Brake and Throttle Pedal Spring Kit for LOGITECH G27 G29 G920 Racing Wheel

  • Design background of the Brake and Throttle Pedal Spring Kit: Many Logitech racing owners report that the original brake and throttle pedal is too soft or too hard, so it can not experience the real brake and throttle pedal.The modified solution is to improve the feel of the Brake and Throttle by replacing our specially designed Brake and Throttle springs and simulated vacuum hydraulics.This is by far the cheapest way to convert..
  • Advantage: Improve pedal feel with a balanced increase in firmness. Simulates the pedals in a real car.Improve lap time and consistancy when compared to an unmodified pedal..
  • Suitable for: Logitech G27 / G29 / G920 Racing Wheel( If you are not sure if your model can be installed, you can contact us to confirm.).
  • Glodorm Upgrade Mod Brake and Throttle Pedal Spring Kit for LOGITECH G27 G29 G920 Racing Wheel.
  • Packing includes:1 * Specially Designed Brake Spring, 1 * Specially Designed Throttle Spring, 2 * Wrenches.
Check Stock

NOWIGOT 2pcs,Red Accelerator Gas Pedal Brake No Drilling Pedal Cover Anti-Slip Performance Aluminum Alloy Foot Pads Kit Fit for for Dodge Challenger Charger Chrysler 300 2009-2021

  • ☛Fitment:Gas Brake Pedal cover fits for Dodge Challenger /Dodge Charger / Chrysler 300 2009-2021.(Not fit for SRT&2016 Charger)（Before placing an order, please make sure that the photo is the same.）.
  • ☛High Quality:The Made of high quality aluminum alloy with black anti-slip rubber, Non-slip surface design.NOTE:The original brake pedal rubber pad needs to be removed before installation.Otherwise, the brake pedal cannot be properly installed on our products..
  • ☛Safety Design:Black anti-slip rubber strip, increasing the friction between the soles and pedals, wear-proof and corrosion-proof, improve safe driving..
  • ☛Easy installation:No need tools, please remove the original brake pedal rubber pad after remove, can install brake pedal pad, gas pedal cover don't need to remove. (Note: Remove the factory brake rubber padel cover to add our brake pedal product.).
  • ☛Quality Guarantee:If you're not satisfied with our pedal, simply return it for a full refund in 30 days, no questions asked money back. We will reply within 24 hours and give you a satisfactory answer..
Check Stock

1955-57 Fits Chevy 2" Drop Spindles, Aftermarket Disc Brake Conversion Kit

  • Ideal for use with Wilwood or other aftermarket brake kits applicable to Heidt's Tri-5 drop spindle application.
  • 2" drop design to lower the front of you car and achieve the stance you are after.
  • Cannot be used with stock drums or brake conversion for stock type spindle.
  • Ball joints mount through the top, on both top & bottom ball joint mount bosses.
Check Stock

Hauck Fire Rescue Pedal Go Kart

  • FUNCTION: This Pedal Go Kart provides an authentic driving experience and allows the driver to control their speed. This product is designed to be the perfect pedal go kart for young drivers and can be used to ride both indoor and outdoor. It encourages physical activity, builds strength, endurance and coordination..
  • PEDAL POWER: Always ready to go, never need to worry about batteries that require charging. Easy designed pedal-push sprocket, perfect for younger children..
  • DESIGN: Features Firetruck inspired Graphics on front fairing, 4 Spoke Rims with 10 inch EVA Wheels, 3-point sporty steering wheel, hand brake with 8 ball design and steel tube powder-coat frame..
  • COMFORT: The custom, ergonomic seat is adjustable and equipped with a high backrest for a comfortable, safe sitting position. This allows the child to be comfortable and ride longer..
  • PRODUCT DIMENSIONS: Length: 41.93 inches x Width: 20.20 inches and Height: 23.27 inches and Weight: 19.18 pounds.
Check Stock

NEW WILWOOD LONG REVERSE SWING MOUNT CLUTCH OR BRAKE PEDAL ASSEMBLY WITH ADJUSTABLE PEDAL PADS, 6 TO 1 RATIO

  • Brand New Wilwood Long Reverse Swing Mount Clutch Pedal or Brake Pedal with Adjustable Pedal Pads (Wilwood Part # 340-13574)..
  • Wilwood's new Reverse Mount Swing Pedal assembly can be used as a clutch pedal with a single outlet master cylinder or as a brake pedal with a tandem master cylinder..
  • It features all aluminum frame and forged aluminum pedal arms with ladder style construction. ..
  • Features: | Can be used: | * As a Clutch Pedal with a single outlet master cylinder | * As a Brake Pedal with a tandem master cylinder that has a horizontal mounting, when used with a Wilwood Part # 250-3677 (not included with this pedal).
  • Lightweight | * All aluminum frame and forged aluminum pedal arms with ladder-style construction | * New waffle style pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance | * Features a 6:1 pedal ratio | * Easy mounting location | * Below you can view and download the instruction booklet for this assembly here..
Check Stock

NEW SOUTHWEST SPEED RACING BRAKE & CLUTCH PEDAL ASSEMBLY WITH MASTER CYLINDERS & BALANCE BAR, REVERSE SWING MOUNT, SHORT 5 TO 1 RATIO

  • Brand New Southwest Speed Short Reverse Swing Mount Brake & Clutch Pedal Combo Kit With 3 Aluminum Master Cylinders (SWS Part # 301-2663). This combo is very similar to the Wilwood Part # 340-4828X3, only about $50 cheaper..
  • Southwest Speed High Volume Aluminum Master Cylinders | * High pressure die-cast from high-grade aluminum, fully machined and assembled with extreme precision * Features the highest fluid capacity of any integral reservoir design * With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands * More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long runs.
  • Kit includes: | * 1 - Reverse swing mount dual pedal, short design, 5:1 ratio (# 301-266) * 1 - Aluminum clutch master cylinder, 3/4" bore (# 301-290) * 1 - Aluminum brake master cylinder, 7/8" bore (# 301-291) * 1 - Aluminum brake master cylinder, 1" bore (# 301-292).
  • Find more Pedals as well as many other high performance auto parts by visiting the Southwest Speed Amazon Store..
  • Southwest Speed Dual Brake and Clutch Pedal | * This pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside t....
Check Stock

Dorman 20716 Brake Pedal Pad Compatible with Select Toyota Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
Check Stock

Acouto Hand Held Vacuum Pump Tester, Motorcycle Motorbike Trucks Car Hand Held Brake & Clutch Bleeder Vacuum Pump Tester Set Bleed Kit

  • ✔Selected high quality material with high-strength, is sturdy, durable and easy to operate..
  • ✔Copper material barrel is durable and wearable, with good toughness and airtightness. Easy to read the data. Fine polished anti-rust surface treatment with anti-slip rubber sleeve, is wear-resistant, beautiful and comfortable to grip..
  • ✔Rich configuration in the joints, and the pressure gauge accurately measures the vacuum pressure..
  • ✔It can be operated by one person. The joint is suitable for a variety of automotive brake systems. The hand operated pump pulls the fluid through the bleed nipple, no need to use the brake lever or pedal..
  • ✔Suitable for testing vacuum-driven components in automobiles and trucks, including distribution board advance mechanisms, heating and plates, PCV, the headlights cover door and the exchange regulator, release the brake fluid pumping unit, and the car/motorcycle brake oil replacement..
Check Stock

OMT Master Ball Joint Press Kit, Ball Joint Removal Tool Kit for Ball Joint U Joint and Brake Anchor Pin Removal, 21pc Ball Joint Tool Set with Ball Joint Press and Universal Adapters

  • VERSATILE TOOL SET: Orion Motor Tech’s ball joint press kit lets you quickly and easily remove and install stubborn press fit parts, including ball joints, U joints, and brake anchor pins.
  • UNIVERSAL COMPATIBILITY: This ball joint tool kit includes 3 receiving tubes and 9 adapters to work with most 2 & 4-wheel drive cars, pickups, vans, and SUVs and is compatible with GM, Ford, Jeep, and Dodge since 1997.
  • DURABLE CONSTRUCTION: Our ball joint removal tool is made from premium AISI 1045 medium carbon steel that has been forged and coated to provide optimal corrosion resistance and durability for powerful leverage.
  • SAFE & SECURE: The 9 inch long C frame press with a 6 inch opening and extra long jackscrew provides even and straight force to let you smoothly press out joints without damaging other components.
  • EASY TO USE: This 21 piece ball joint tool set removes and installs press fit upper and lower joints without removing the control arms.
  • a custom molded case comes included for easy transport and storage between uses.
Check Stock