Best Brake Pad Gauge Tool

Kent. 20 Girls Trouble Aqua/black Bicycle

  • 2 Pairs C brake pads: the bike brake pads are made of hard-wearing rubber which can decrease noise and provide good braking power in wet and dry....
  • Size: the road brake pad is about 50 mm/ 1.97 inch in length.
  • Each piece has a nut and a spacer, it's easy to remove and install with the tool.
  • V shaped water-leaking tanks: c brake pads with V-shaped tank design will do no harm to the wheel, and improve braking ability.
  • Good compatibility: this versatile c brake pads are suitable for most road brake bikes.
  • Each pair c brake pad has left and right part, without front....
  • Quantity: package include 2 pairs (4 pieces) road brake pads with a tool.
  • Come with the lightweight tool for easy installation.
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock

Lisle 81850 Combination Brake Lining Gauge Set,9

  • The 9 Piece Manual Brake Gauge Set Allows Brake Pad Wear to be Accurately and Consistently Measured without Guessing..
  • Designed to check both straight on or at a 90° angle to the rotor with offset tips so the gauges can be used without removing the wheel or caliper assembly on many applications..
  • Brake lining gauges identify thickness levels for brake lining inspection..
  • The gauges are color coded to match SAE or Metric recommendations for brake pad replacement..
Check Stock

VEVOR Sheet Metal Brake 36 In. Metal Bender Brake 910 mm Length Portable Metal Bender 0-90 Degrees & WEN 3650 4.0-Amp Corded Variable Speed Swivel Head Electric Metal Cutter Shear

  • Product 1: Mini Metal Sheet Brake: Max. Bending width: 36 inches/910 mm.
  • Max. Bending thickness: 0.04 inches/1 mm. Our metal sheet brake is a great tool to bend your metal sheets, with its extraordinary bending performance making itself quite a necessary tool in factories and workshops..
  • Product 1: 0-90° Flexible Bending: You can adjust to a specific angle between 0° and 90° according to your work needs. The metal bender brake is ideal for bending heavy foils and light gauge metals. Bending material gauge up to 20 gauge mild steel & 14 gauge aluminum..
  • Product 1: Two C-Shaped Clamps & Knobs: Effortless bending can be achieved through adjusting two lengthen handles. Pre-drilled touting holes allow mounting on the bench. And two C-shaped clamps are provided.
  • you can fix the brake with clamps conveniently..
  • Product 1: Heavy Steel Construction: The sheet metal bending brake is well-built with premium steel. Solid construction will stand for many years of heavy use. And it's compact and portable.
  • you can easily bring it from home to your job site..
  • Product 2: Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minute.
  • Product 2: Attack up to 20 gauge stainless steel and 18 gauge sheet metal.
  • Product 2: Lightweight design limits fatigue d....
Check Stock

3 Pieces Tire Tread Depth Gauge Tool Digital Tire Tread Depth Gauge Brake Lining Thickness Gauge Coded Tire Tread Depth Gauge Automotive Brake Pad Measure Ruler for Motorcycle Car Truck and Bus

  • Durable construction: these tire tread depth gauge tool are made of flexible plastic and stainless steel material, smooth and lightweight, solid and sturdy to use, not easy to break and rust resistant, which can support a long time usage.
  • Proper dimension: the digital tire tread depth gauge measures approx. 11.2 x 6 cm/ 4.41 x 2.36 inches, the coded tire tread depth gauge measures approx. 8.5 x 2.5 cm/ 3.35 x 0.98 inch, the brake pad measuring tool measures approx. 13 x 3.6 cm/ 5.12 x 1.42 inch, suitable size is convenient for you to storage when they are not in use.
  • Easy and simple reading: these tire tread depth tool are uses with LCD display and different colors to distinguish the different readings, so that they you can measure the tread depth fast and accurately, which makes you know how long the tire needs to be replaced, which is really convenient and simple.
  • Practical and useful vehicle tool: these digital tire depth gauge can quickly check tire tread remaining to determine how long before they need replacing without remove the tires.
  • Good compatibility: these tire tread depth gauge tools are suitable for any kinds of vehicle and covers trucks and heavy transportation as well, accurate measurement of tread markings to ensure your driving safety.
Check Stock

YSTOOL Pneumatic Brake Caliper Piston Wind Back Compression Spreading Tool 23PCS Kit Rewind Spreader Air Tool Set to Repair Brake Pad Change Brake Pump for Cars Trucks

  • Brake caliper tool set comes with a brake compression tool and 22 drive key disc adapters, making it a easy job to push the brake caliper piston back without others' help. YSTOOL pneumatic brake pad caliper tool fits for a variety of domestic and foreign vehicles with windback pistons and push back pistons, performing services on many brake repair jobs like brake pump regulating, brake pads replacement, etc..
  • YSTOOL brake tools are compatible with Ford, Alfa Romeo, Audi, BMW, Citroen, Fiat, Alfa Romeo, Honda, Range Rover, Jetta, Jaguar, Subaru, Mazda, Mercedes, Mitsubishi, Nissan, Renault, Saab, Iveco, Toyota, Volvo, VW, etc. Just choose one adapter, connect the brake piston caliper tool to shop air, press air trigger(til the end) and rotate swivel rod to rewind brake piston, then release pressure before tool removal by pressing air release button..
  • Compared with manual brake caliper spreading tool, pneumatic brake caliper tool is more laborsaving, convenient and environment-friendly. Only one tool is needed to satisfy for use with left and right hand threaded pistons by rotating the long swivel handle freely, no need to gather two sets of left and right hand thrust bolt assemblies and waste time to try which one is right. YSTOOL caliper piston re....
Check Stock

Tanstic 16Pcs Tire Tread Depth Gauge and Brake Lining Thickness Gauge Set, Come with Tire Pressure Gauge and Tire Valve Caps

  • ☀[Package Includes] You'll get 1 set of brake lining thickness gauge(8pcs), 3pcs tire tread depth gauge, 2pcs tire pressure gauge and 10pcs tire valve caps..
  • ☀[Brake Lining Thickness Gauge] Brake lining thickness gauge is designed for detecting the thickness of brake pads quickly and accurately. And the purpose of color coded design is to match SAE or Metric recommendations for effective and efficient brake pad measurement..
  • ☀[Tire Tread Depth Gauge] Tire tread depth gauge can be used to measure tire tread depth accurately, and the color coded design can clearly distinguish the different phase of tire. Suitable for trucks, automobiles, motorcycles or other vehicles. You just need to put the tire tread depth gauge perpendicular to the tire surface, and then press down until needle touches the tire, and finally look straight and read the data horizontally..
  • ☀[Tire Pressure Gauge] Tire pressure gauge can be used to measure tire pressure accurately and it is designed with 45 degree angle single head for easy operation. You just need to twist off the tire valve cap, press the mechanical tire gage chuck to the valve, then the scale plate will slip out and you can read the tire pressure from the scale plate..
  • ☀[Tire Valve Cap] 10pcs tire valve caps ar....
Check Stock

Segomo Tools 360 Degree Swivel Joint Slip Resistant Heavy Duty Brake Pad Spreader Tool | Brake Compression Tool | Brake Pad Tool | Disc Brake Pad Spreader | Brake Caliper Tool - BPST01

  • [ Do The Job Quickly ] This brake pad spreader is ideal for compressing inner brake pads and resetting pistons for fast break pad replacement..
  • [ Comfortable To Use ] Tighten by hand with the built-in easy to turn slip resistant comfortable knob and threaded driver..
  • [ Will Last In Time ] Our brake tool is made from high carbon steel and chrome vanadium mix for added strength and corrosion resistance..
  • [ Be Precise ] 360 degree swivel joint of our brake spreader is designed for even and precise compression force..
  • [ Versatile Use ] Compatible with domestic cars and light trucks and is ideal in tight areas where a C-Clamp won't work. HOW TO USE: 1 - Use your old brake pad in conjunction with this brake pad spreader tool to compress the piston. 2 - Open the brake master cylinder cap before compressing and monitor the fluid level so it does not overflow. 3 - After changing the brake pads, start the vehicle and pump the brakes before driving..
Check Stock

Vector Tools ISO/Bubble Flaring Tool Kit, 9 Piece | Includes Blow-Molded Case W/Mini Pipe Cutter

  • Make your own brake lines with the bubble Flaring I.S.O tool Kit, designed for metric soft steel brake lines requiring an “ISO” or bubble style flare.
  • Lever-lock flaring bar makes tool kit easy to use for professional and DIY mechanics.
  • Suitable for foreign (European, Japanese) and domestic vehicles (cars, SUVs, light trucks).
  • Yoke assembly, Flaring bar, Gauge/wrench, 10mm tubing, 4 adapters for 4.75mm, 6mm, 8mm, 10mm.
  • ISO/Bubble Flaring Tool Kit designed for metric soft steel brake lines where an “ISO” or bubble style flare is required, set included: Yoke Assembly, Flaring Bar, Gauge/Wrench and 4 adapters for 4.75mm, 6mm, 8mm, and 10mm Tubing.
Check Stock