Best Brake Pad Depth Gauge

Lisle 81850 Combination Brake Lining Gauge Set,9

The 9 Piece Manual Brake Gauge Set Allows Brake Pad Wear to be Accurately and Consistently Measured without Guessing..
Designed to check both straight on or at a 90° angle to the rotor with offset tips so the gauges can be used without removing the wheel or caliper assembly on many applications..
Brake lining gauges identify thickness levels for brake lining inspection..
The gauges are color coded to match SAE or Metric recommendations for brake pad replacement..

Check Stock

Acouto Brake Pad Thickness Tool Car Brake Pad Tester Vehicle Brake Pad Thickness Gauge Brake Pad Lining Measure Tool Automotive Measurement Brake Shoe Gauge

6mm / 0.2in---- This brake pad thickness tool is designed for brake pads (IV, V category) with 6mm / 0.2in thick base plate. This car brake pad tester is suitable for internal and external brake pads, with 1.5mm marking and calibration check.
Professional Design---- The slender design allows the tool to position the back of the lining plate, so that the probe can measure the distance between the bottom of the lining plate and the brake disc.
Practical Tool---- This brake pad thickness gauge is an ingenious tool that saves time, which is essential to any vehicle. Measure the brake pads of the vehicle without removing the wheels.
Easy to Use---- The brake pad lining measure tool is easy to operate and use, align the brake pads and press to measure, which is very convenient and highly practical.
Customer Said---- I do not use anything else when I inspect brakes on the vehicle. The tool is so simple to use and to read that anyone can do it the first time. Is that it removes the backing plate measurement of the brake pad and give you the real measurement of the pad only.

Check Stock

Tire Tread Depth Gauge, Preciva LCD Digital Tire Tread Depth Gauge Tool with Inch and MM Conversion of 0-0.98 Inches(NO Fraction Display/ NO 32nds).

[INCH & MM Measurements Conversion]: Display can be switched between inches and mm( NO Fractions)..
[LCD Screen Display]: Digital depth gauge with large LCD display. give you clear reading..
[Easy for Operating]: Zero setting at any position, Measuring range: 0-25.4mm, 0-1inch..
[Widely Application]: Suitable for tread depth, brake shoe and pad wear..
[Power ON & OFF Button]: Manual power on / off, Sturdy plastic housing..

Check Stock

Tire Tread Depth Gauge, Digital Tire Tread Depth Gauge LCD with Inch and MM Conversion of 0-0.98 Inches, Tread Checker Tire Tester for Cars Motorcycle Trucks Vans SUV, Black

【Professional Tire Tread Depth Gauge】Digital large LED LCD screen display, convenient reading, intuitive and reliable, timely understanding of tire wear, professional measurement of tire anti-skid pattern depth..
【Easy for Operating】Zero setting at any position, Measuring range: 0-0.98 inches/0-25.4 mm (NO Fraction Display/ NO 32nds). Manual power on/off..
【Resistant & Durable】It adopts electroplated iron probe design, which is wear-resistant and durable. Fine workmanship, new data transmission hole..
【Portable and Practical】Approx. size: 11.2 x 6 cm/4.41 x 2.36 inches. Sturdy plastic shell, mini size, handheld and portable, easy to read the tire tread depth to understand the wear..
【Widely Application】Suitable for tread depth, brake shoe and pad wear. If you have any questions, please feel free to contact us and we will reply to you within 24 hours..

Check Stock

ITEQ Brake Lining Thickness Gauge 8 Piece SAE & Metric Steel Constructions

Color coded brake pad gauge to identify thickness level ranges for brake lining inspection.
The brake measuring tool can be used to quickly gauge any vehicle including trucks and heavy duty transportation.
Set of 8 gauges denoting 3 thickness levels: Green, Yellow & Red, which indentify if the brakes are still good (Green), should be serviced (Yellow) and must be serviced (Red).
Each gauge blade has both Metric & SAE: 3 green (12, 10, 8 mm & 0.4724, 0.3937, 0.3150 inch), 3 yellow (6, 5, 4 mm & 0.2362, 0.1969, 0.1575 inch), and 2 red (3, 2 mm & 0.1181, 0.0787 inch).
Constructed out of steel with powder coat riveted together for extra strength and durability.

Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
Press bearings and races into an open hub wheel assembly on most European and American cars.
Some tools in the kit are disk brake specific, such as the caliper piston retractor.
If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
EASY STORAGE: No longer will you need to worry about y....

Check Stock

Sunyat Power Brake Booster Pushrod Pin Adjustment Tool Blue

Easy to use, removing both hours of labor and frustration. Makes installing the master cylinder on to your power brake booster simple..
The adjustment tool is designed to accurately measure the depth of the bore of the brake master cylinder, so that you can adjust the length of the....
Work for 60's-80's era cars. Compatible with Dodge, compatible with Chevy and compatible with AMC models(such as compatible with Corvette 1968-1976,....
Usage:First you gauge the depth on your master cylinder and then you go to the booster and flip over the Tool to see if you need to lengthen the pin....
Works for many Boosters ,Compatible with GM/Compatible with Chevy Boosters and Compatible with MBM Boosters..

Check Stock

Brake Adjustment Tool, Brake Booster Adjustment Tool, Brake Booster Push Rod Adjustment Tool for Adjustable Braking Distance of Brake Pedal, Suit for Most Brake Boosters with Adjustable Pins

Using Brake Booster Push Rod Adjustment Tool Turned Out to Be So Easy - Yoolon designed a brake booster adjustment tool that works for everyone, even if you don't have the expertise also can use power brake booster pushrod pin adjustment tool quickly and easily. The brake adjustment tool's designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use. Our brake adjustment tool can improve work efficiency and saves time.
Brake Adjustment Tool Rejects All Safety Hazards - We designed a new master cylinder push rod length gauge is measure the depth of the master cylinder piston bore in order to adjust the length of the booster push rod pin. And two ends of the booster push rod pin adjustment tool are designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use which making your measurement and maintenance process easier.
High Quality That Puts Everyone's Mind at Ease - Get master cylinder push rod length gauge that no more worries about quality. Our brake booster adjustment tool kit is made of high-quality aluminum alloys, an....

Check Stock

ABN Brake Drum Tool Kit 15-Piece Service Brake Kit with Spring Pliers Brake Spoons Pad Gauge Brake Spring Tool

PROFESSIONAL GRADE AUTOMOTIVE TOOLS: The ABN 15-piece Drum Brake Service Kit is designed to allow you to remove and replace worn and broken brake parts and to make it easier to reach other parts.
These rear brake tool sets are designed to be used on most foreign and domestic cars and trucks.
SERVICE YOUR VEHICLE BRAKES: Whether you are a seasoned mechanic or a home mechanic, this automotive tool set allows you to service your vehicle brakes by making it easy to replace springs, check your pads, and reach other parts of the drum brake system.
EASY TO USE: The spring installer, remover, and retainer tools help to adjust brake springs safely to get to deeper parts of your brake system while the various adjustment spoons help you adjust clearance between the drum brake and brake shoe.
The 8 brake lining thickness gauges help you to identify thickness levels to know when its time to change your pads.
BUILT TO LAST: Constructed of heavy-duty metal, these brake tools are designed for durability and longevity.
Each standard sized brake adjusting tool has a chrome finish to protect from rust and corrosion.
The spring puller tool, spring installation tool, and spring retainers have ergonomic handles for comfort when using.

Check Stock