Best Brake Line Adapter

BUCKLOS Shimano MT200 MTB Hydraulic Disc Brakes Set with 160mm Rotors Front Left 800mm Rear Right 1550mm/1650mm Mountain Bike Hydraulic Brake Aluminum Alloy Levers with Calipers

  • Massive stopping power：Shimano hydraulic brakes is the best Upgrade kit from mechanical brake, dual-piston line pulling hydraulic brake caliper helping you braking easier, you can stop with almost no pressure..
  • Quiet braking: The brake pad of this bicycle disc caliper is made of resin-metal composite pads, not only not damage your rotor, but also not make any noise when braking.
  • Compatible most bikes: shimano disc brakes set suitable for most mountain bikes, electric ebike,fat bike,folding bike (You only need to consider whether the tubing is long enough, package not inclued adapter).
  • Easy to install: shimano brake kit uses mineral oil fluid(pre bled), unboxing Ready to install and use. And unlike other low-end hydraulic brakes, you can easily buy professional maintenance tools and pad.
  • Brake size: for Bucklos mtb disc brake,left side controls the front, right side controls the rear, cable of front is 800mm, cable of rear is 1550mm..
Check Stock

Line Lock Roll Control Brake Lock,Universal Launch&line lock kit for brakes Electric Solenoid Kit(Black)

  • ...ith this system. Line locks are often used for burnouts by fully locking the front wheels and then engaging the gas pedal and disengaging the clutch pedal, this makes the rear tires spin but keeps the car stationary.
  • Each kit includes a inline fuse connector, indicator light, snap-action switch, 2pcs 1/8-27NPT brass adapter and 3pcs mounting screws. High quality stainless steel valve assembly gives it strong sturdiness.Works with 12 -24 volt electric systems.
  • Fully-enclosed epoxy-molded electrical coil makes it reliable.
  • The attractive aluminum fin shell enables it to cool down.
  • The wider lightweight base provides better mounting stability.
  • besides, it has extra threaded port for brake line pressure gauge..
  • ATTENTION: This line lock is to be installed in the front braking system (for rear wheel drive vehicles) for drag race staging or burnouts. Alternatively, in the rear braking system for front wheel drive vehicles. This solenoid will not impede normal braking when installed correctly..
Check Stock

YEENOR MT200 MTB Hydraulic Disc Brake Set, Left Front 800mm Right Rear 1400mm Aluminum Alloy Bike Bicycle Brake Fit for Shimano Mountain Bike XC Trail/e-Bike/Fat Bike

  • 【Brake Set size】MT200 for Shimano hydraulic brake, the left front brake hose length is 800mm, and the right rear brake hose length is 1400mm.pre-installed with resin pad B01S.160mm rotor compatible by default, IS/PM universal. Suitable for all sizes of handlebars..
  • 【Easy braking】MTB hydraulic oil brakes, dual piston brakes, no matter how fast the bike is going, how steep the terrain is, how wet the environment is, a gentle pull on the brake lever will stop the bike immediately..
  • 【Quick Installation】The MTB hydraulic brake set comes with a 160mm PM/IS universal mounting adapter for direct installation and use. no need to assemble, it can be installed out of the box..
  • 【Sturdy and durable】Remember it fits SHIMANO, the precision manufacturing process ensures its durability. High strength aluminum alloy brake lever is not easily damaged and more wear-resistant. Resin pad has better heat dissipation and better braking effect. Less maintenance, Provides a safer ride..
  • 【Conforms to human body design】 The three-finger brake lever is designed according to the human body. The brakes are easy to operate, front and rear, left and right, and the sufficiently long fuel line can be adapted to almost all models..
Check Stock

ASD 3/16 and 1/4 Brakeline fittings kit nuts unions compression fittings 70 Pieces

  • Auto Supplies Direct (70) Piece 3/16″ & 1/4″ Brake Line Fittings Kit (3/16″ and 1/4″ Tube Nuts, Unions, and Compression Fittings) for Cars and Trucks.
  • Contains a (30) Piece 3/16″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 3/16″ Short Tube Nuts, (10) 3/16″ Long Tube Nuts, and (10) 3/16″ Unions.
  • Contains a (30) Piece 1/4″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 1/4″ Short Tube Nuts, (10) 1/4″ Long Tube Nuts, and (10) 1/4″ Unions.
  • Contains (5) 3/16″ OD Compression Brake Line Fittings.
  • Contains (5) 1/4″ OD Compression Brake Line Fittings.
Check Stock

CURT 57186 4-Way Flat Vehicle-Side to 7-Way RV Blade Trailer Adapter with Brake Controller Wiring

  • BRAKE CONTROLLER CONNECTION. This trailer wiring adapter makes it easy to add wiring for a trailer brake controller. It plugs into a 4-way flat....
  • WEATHER-RESISTANT. This trailer wiring harness adapter comes with a spring-loaded dust cover for the 7-pin wiring socket to protect the terminals from....
  • STANDARD CONNECTION. This trailer hitch wiring adapter plugs into any standard 4-way flat and can be used to connect the taillights, brake lights,....
  • EASY TO INSTALL. This 4-pin to 7-pin trailer adapter with brake controller wiring comes ready to plug into your vehicle or trailer wiring with minimal....
  • DURABLE CONSTRUCTION. For long-lasting use and a reliable connection, the housing of this trailer harness adapter is made from durable black plastic....
Check Stock

JooFn Bike V Brake Noodle Cable Guide Pipe Rubber Boots Bicycle Cycling 10 Sets (30Pcs)

  • Included 10 Boots and 10 Noodles(5pcs is 90° bend, another 5pcs is 110° bend), and 10pcs brake cable caps..
  • Tube with a plastic catheter, reduce friction brake line, effectively protect the brake line, reduce brake line resistance..
Check Stock

BUCKLOS MTB Hydraulic Disc Brakes Set for Mountain Bike , Left Front 800 mm Right Rear 1500mm Bike Hydraulic Brake Aluminum Alloy Levers with Calipers /PM/is Adapter fit eBike / Fat Bikes

  • Massive stopping power: Bucklos hydraulic bicycle brakes is a upgrade sets from mechanical disk brakes, and double piston brakes, you just gently pull the brake lever to stop instantly, whether in snowfield/steep downhill mountain/puddle/dusty trail mountains / beach cycling.
  • Quiet braking: pad of Bucklos mtb hydraulic brake set is made of resin-metal composite material, which have super abrasion resistance will not make any noise when you braking.
  • Compatible most bikes: Hydraulic brakes for mountain bike is equipped with IS/PM universal mounting adapter, fits most bike , like electric ebike, scooter, folding bike, fat bike，ebikes，bmx,motorized etc.
  • Easy to install & Replacement : Bucklos hydraulic disc brakes kit uses mineral oil(pre bleed), unboxing Ready to install and placement. Before installation, please confirm whether the cable length is fits with your frame and if use 180mm, 203mm rotors need to replace the adapters..
  • 【Brake direction】Bucklos hydraulic bike brakes adopts left-front/ right-back break method, fits the habit of most people, line for front is 800mm,back line is 1450mm.
Check Stock

Tektro 984 Black Rear Caliper-Lever-Cable BMX Bicycle Brake Kit

  • You will get: 2 pairs mountain bike brakes with the brake pads fit for most bicycle, road bike, etc..
  • 2 Pieces barrel ended brake cables (2 m in length), 2 pieces cable end caps and 6 pieces end ferrules.
  • Product dimensions: the bike brakes in arch size is 110 mm (4.3 inches), brake pad is 55 mm (2.1 inches), barrel ended brake cables are 2 m in length.
  • Durable material: this bike brakes set is made of alloy and plastic, strong and durable enough for using long time, meet your needs.
  • How to install: 1. crew the fixing hole of the brake corresponding to the body fixing hole.
  • 2. Pass the brake wire through the brake wire tube in sequence, and fix the position of the metal wire tube.
  • 3. Fix the brake line on the bolt, then install the brake leather, adjust the distance, position and length of the brake line, and then fix the brake line firmly.
  • Wide applications: this bike brakes set fits for most bicycles, road bikes, MTB, BMX.
  • Warm note: you need to confirm whether the rear wheel of your car has the mounting hole of this type of brake, please be careful to purchase.
Check Stock

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear

  • You will get: 2 pairs mountain bike brakes with the brake pads fit for most bicycle, road bike, etc..
  • 2 Pieces barrel ended brake cables (2 m in length), 2 pieces cable end caps and 6 pieces end ferrules.
  • Product dimensions: the bike brakes in arch size is 110 mm (4.3 inches), brake pad is 55 mm (2.1 inches), barrel ended brake cables are 2 m in length.
  • Durable material: this bike brakes set is made of alloy and plastic, strong and durable enough for using long time, meet your needs.
  • How to install: 1. screw the fixing hole of the brake corresponding to the body fixing hole.
  • 2. Pass the brake wire through the brake wire tube in sequence, and fix the position of the metal wire tube.
  • 3. Fix the brake line on the bolt, then install the brake leather, adjust the distance, position and length of the brake line, and then fix the brake line firmly.
  • Wide applications: this bike brakes set fits for most bicycles, road bikes, MTB, BMX.
  • Warm note: you need to confirm whether the rear wheel of your car has the mounting hole of this type of brake, please be careful to purchase.
Check Stock