Best Brake Light Flasher Module

United Pacific 90655 Brake Attention Module for LED Brake Lights, Rapid Flash Then Steady On, Easy Hookup, 12V, Max Capacity of 1.5 amp - ONE Unit

DISCLAIMER: For show/off-road use only. This device may not be legal for street use. Please check with Federal Laws and/or regulations in you state, county, and/or municipality regarding installation and use of this product..
WHAT IT DOES: The United Pacific Brake Attention Module permits the brake light to momentarily flash rapidly prior to becoming fully lit. The speed and duration of the flash can be individually controlled by the module. The module can only be connected to the LED brake lights or the third brake light..
INSTALLATION: Included along with the Brake Attention Module, is our easy hookup instruction. Installation at the brake light switch, the module will operate both rear tail lights. 12V.
UNITED PACIFIC: United Pacific has a large library of aftermarket parts and accessories from our classic car department to our trucking department. We strive to be the best and offer the best at the best cost! We take pride with our work and products, and it takes countless hours to create the best products out there! Our team is dedicated with providing you with the answers you need when ordering our products.
WHO WE ARE: We at United Pacific are unique individuals whose varied talents and experiences bring value to the way we connect with big rig dri....

Direct replacement compatible with Subaru WRX flasher relay.
NOTE: Your factory tap-to-turn feature will still function with this flasher installed..

& Improve traffic safety warning, to avoid rear-end accident. When driving clogged at night, continued brakes produce visual fatigue,This flasher can....
& Good waterproof and dust proof performance to prevent short circuit on the durable module box. Black wire-negative pole and red wire-positive pole..
& Made of eco-friendly and durable material. Double side tape is included for easier install. Complete sealed technology make it waterproof, short....
& Compatible with all types of brake lights including LED clusters, such as cars, motorcycles, electric bicycles and other LED lights.
& Wide boltage 12V DC , suitable for all motor vehicles, cars motorcycle tank armored vehicles electric bicycle and other LED lights, the best....

Brand New Taillight assembly With 1pcs 2-pin Orange Led turn signal flasher relay(B pole=Input，L pole= output---Must in Right connection or Not....
Package Included: 1pcs Taillight assembly & 1pcs 2-pin Orange Led turn signal Flasher relay (NO taillight Relay Including!!! you can used your store....
Wire Connection: Black Line:Negative ；Red Line:Red Lighting(Brake light) ：Blue Line:Red lighting(Running light) ；2 *Yellow Line:Yellow(Turn....
Fitment：Compatibility for HONDA MSX /Grom 125 2013 - 2016 , CB 650 F 2014 - 2015, Compatibility for HONDA CBR 650 F 2014-2015 , Compatibility for....
Note！！LED light usually use little bit power, sometimes after you install, the LED light blink so fast or not blink, if you have this issue, you....

Direct replacement compatible with Toyota Tacoma flasher relay.
NOTE: This flasher is only compatible with Tacoma models that do not feature Daytime Running Lights (non-DTRL). It is not....

See fitment guide image for additional Machines this item fits. The Tusk Motorcycle Enduro Lighting Kit is an easy to install lighting kit that doesn’t require you to cut into or interfere with your motorcycle’s wiring..
Kit comes complete with wiring harness, MX D-Flex handguards with LED turn signals, LED flush mount rear turn signals, flasher relay, horn, hydraulic brake switch, LED taillight/brake light, dual sport folding mirror, On/Off switch, and control switch..
A rechargeable battery pack is included with models that don’t have an existing battery. Can be recharged quickly with the Tusk 1 amp battery charger part #1263750002 (sold separately)..
The kit is intended for motorcycles with existing headlights..

Improve traffic safety warning, to avoid rear-end accident. When driving clogged at night, continued brakes produce visual fatigue,This flasher can....
This small block controller enhance your brake light function with 2 patterns,when braking: 1. fast-blinking 4 times , 2. slow-blinking 4 times, When....
Wide boltage 12V - 24V DC , suitable for all motor vehicles, cars motorcycle tank armored vehicles electric bicycle and other LED lights, the best....
Complete sealed technology make it waterproof, short circuit prection..
Compatible with all types of brake lights including LED clusters, such as cars, motorcycles, electric bicycles and other LED lights.

...lity smoked lens - OEM fit. Features our Microprocessor based Blaster-X Technology with Brake Alert and Strobe Mode built in! New 2nd Generation Programming Interface allows users to easily customize features! New Sure-Blink Technology Plug and play connectivity with OEM connectors! ***REQUIRED ACCESSORY: ELFR-1_QD Flasher Relay***. Recommended Accessory: Blaster-X Control Switch. Made in the USA! 2-year Warranty & Satisfaction.
Brake Alert automatically provides one of 11 user-selectable brake modulations the instant the brakes are applied. This alerts motorists the instant you apply the brakes - possibly saving seconds of reaction time for non alert motorists! The different modulation patterns can be user-selected VIA our new 2nd Generation Programming Interface! It can also be disabled completely if desired, for standard brake light operation..
Turn Alert is a NEW approach to our integrated LED tail light operation. Typically, and integrated tail light will switch between yellow and red on the side you are indicating a turn. This only creates a color contrast. With Turn Alert, the tail light cycles between full intensity yellow, and OFF, on that side. Therefore, there is a full contrast turn signal operation on that side..

Improve traffic safety warning, to avoid rear-end accident. When driving clogged at night, continued brakes produce visual fatigue,FXC flasher can solve this shortcoming very well..
This small block controller enhance your brake light function with 2 patterns,when braking: 1. fast-blinking 4 times , 2. slow-blinking 4 times, When flashing is completed, stay in the original steady light, This warns your following drivers with a catchy blinking light..
Wide boltage 12V - 24V DC , suitable for all motor vehicles, cars motorcycle tank armored vehicles electric bicycle and other LED lights, the best installed in the third brake lights..
Complete sealed technology make it waterproof, short circuit prection..
Easy to install and durable.With our strict quality control system, we test each item and 100% ensure in good condition before we ship.Enjoy 1 year quality warranty under regular use. Offering customer technical service, feel free contact us for technical, installation and use question..