Best Bowden Tube

PTFE Bowden Tube 1M 1PCS+ 6pcs KJH04-M6 Fittings + 6pcs JP4-01 Pneumatic Fittings with PTFE Tube Cutter for 3D Printer 1.75mm Filament

3*1 Meter Original Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate....
1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
6 * JP4-01 and 6 * KJH 04-M6 bowden tube fitting to secure PTFE in extruder and hotend..
Easy to Install: the pneumatic fittings are PC4-M6 and the hotend fittings are PC4-M10, the upper part can be inserted outer diameter 4mm PTFE tube....
Compatibility: fit for 3D Printer 1.75mm Filament and other devices..

Check Stock

Genuine Capricorn Premium Bowden Tubing XS Series Bowden Tubing for 1.75mm Filament with Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings for Creality Ender 3/Pro Ender 5 CR-10/10S 3D Printer 1 Meter

Creality Capricorn Tube----100% Original Capricorn XS Series tubing.Genuine Capricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives..
Lower Friction----High lubricity additives make XS Series tubing the lowest friction bowden tubing on the market. It developed specifically for 1.75mm filament with an extremely precise internal diameter.The inside diameter of bowden liner is one of the critical feature for the successful print..
High Temperature Resistant----High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL.The maximum operating temperature up to 280!.
Upgrade Your 3D Printer----Capricorn Premium XS bowden Tubing is officially authorized and guaranteed quality.Using Original Capricorn XS Series tubing make less friction and more responsiveness,means you can save more time.It's really a great way to upgrade your 3D printer with a reasonable prices!.
Brass Pneumatic Connector----The PC4-M6 and PC4-M10 pneumatic connector is made of brasss, with small metal teeth,which can tightly coupled.Therefore, it's never leakaged filament during printing..

Check Stock

Upgrade 3D Printer Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm 0.4mm Nozzle

Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing.
Capricorn PTFE tubing: High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more....
Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.
Suitable For Creality ender 3/ender 3 Pro.

Check Stock

Creality Capricorn Bowden Tubing 1M Bowden PTFE Tube for 1.75mm Filament with Teflon Tube Cutter 2X PC4-M6 Extruder Fitting & 2X PC4-M10 Hotend Fitting for Ender 3 V2/3/3 Pro/5/CR-10/10S 3D Printer

GENUINE UPGRADES: Creality Capricorn XS Serious Bowden PTFE tubing is the lowest friction premium tubing on the market with faster response, less....
COMPATIBLE WITH MORE FILAMENTS: This bowden tube is reinforced with a proprietary blend of high-performance additives that can withstand higher....
SMOOTHER FILAMENT OUTPUT: Designed for 1.75mm filament, Creality capricorn tubing has extremely accurate inner & outer diameter, and filament loads....
BEST ENDER SERIES ACCESSORIES: Teflon tube length: 1 Meter, Inner Diameter: 1.95mm ± 0.05mm , Outer Diameter: 2mm. The optimal inner diameter size is....
GREAT PACKAGE: Package comes with two PC4-M6 fittings for the extruder and two PC4-M10 coupler for the hot end, Its 4mm inner diameter is used for the....

Check Stock

ENOMAKER Upgrade All Metal Extruder Kits Rotary Feeding Knob 1M Capricorn Bowden Tubing 4 Hot Bed Leveling Spring Pneumatic Fitting 3D Printer Kits

【All Metal MK8 Bowden Extruder Kit】The grey extruder feeder drive is made of high quality aluminium alloy, with stronger and adjustable extrusion....
【1M Capricorn Bowden Tubing】Premium XS series PTFE tube for 1.75mm filament,low frition,heat resistant to 300°C, auti-carbonize, with extremely....
【Upgrade Bed Leveling Springs】Yellow compression mould die springs, length 25mm, it is longer and have more adjustment range,stiffer than the....
【Rotary Feeding Knob】Easier and smoother to load filament without worrying about it scraping or breaking..
【Compatible】for all-metal MK8 extruder feeder drive 1.75mm. Such as Ender 3/Pro/V2/Max,Ender 5/Pro/Plus,CR-10 Series, CR-10S(Excludes 10s pro and....

Check Stock

Official Creality Bowden Tube 1M, 3D Printer PTFE Tube Teflon Bowden Tubing Upgrades for 1.75mm Filament Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/CR 10 Series (1M)

【Best Performance】 Creality Bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend..
【Compatible with More Filaments】 PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃..
【Product Parameter】Teflon tube length: 1 Meter, Inner Diameter: 1.95mm ± 0.05mm , Outer Diameter: 2mm. The optimal inner diameter size is designed to reduce "wiggle room" or flex in the tube, allowing you to print flexible filaments even on the longest Bowden systems..
【Highly Compatible】 Compatible with Creality 3D printer:Ender-3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender-5/Ender 5 Pro/Ender 5 Plus/ Ender-6/CR-10/CR-10S/CR-10 V2/CR-10 V3/CR-10 S4/CR-10 S5..
【Technical Support】Creality pays great attention to the buyer’s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours..

Check Stock

UniTak3D Ender 3 Direct Drive Upgrade Kit Conversion Bracket Compatible with Creality Ender 3 V2,Ender 3 Pro and Voxelab Aquila 3D Printer Dual Gear Extruder&Bowden Extruder

【Application】:The direct drive upgrade kit is suitable for Ender 3 V2,Ender 3 Pro,Ender 3,Voxelab Aquila 3D printers,NOT compatible with Ender 3 Max,Ender 3 Neo,Ender 3 V2 Neo,NOT compatible with TITAN extruder..
【Outstanding Extrusion Control】:A direct drive extruder improves extrusion and retraction by removing the need for the Bowden (PTFE) tube. It provides precise retraction and a better print result..
【Stable Operation】:The holes of the Split Type conversion bracket are perfectly aligned, with supports on both sides to keep the center of gravity in the middle, and the structure is more stable..
【Flexible Filament Supported】: Compared with bowden extrusion,this direct drive extrusion greatly improves print quality of TPU and other flexible materials..
【Easy Installation】:No X,Y or Z-axis build volume lost. No firmware or wiring modification.Just tear down the original Ender 3 series plate and mount this direct drive upgrade kit..

Check Stock

Creality Capricorn Bowden PTFE Tubing Tube XS Series 1 Meter 1.75MM Filament with PTFE Teflon Tube Cutter for Ender 3 Ender 3 Pro, Ender 5, Ender 5 Plus CR-10,CR-10V2 3D Printer

100% Original Capricorn XS Serious tubing Original..
High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills..
Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved..
1.9mm 0.05mm Inner Diameter Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems..
High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL..

Check Stock

Official Creality Ender 3 Direct Drive Extruder Kit, Comes with 42-40 Stepper Motor Hotend Kit, Support Flexible TPU Filament, BL Touch, Compatible with Ender 3 Pro/ Ender 3 V2

Compatibility with - Creality Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer..
Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble..
Direct Extruding Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament. there is more even feed-in with direct extruding than Bowden tube extruding..
Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment.
an Integrated structure is convenient for wiring and replacing..
Printing at High - Temperature, Strong Compatibility: Compatible with more types of filament like PLA filament, PETG filament and TPU filemnt. When printing flexible TPU under high temperature, it can optimize TPU printing performance..

Check Stock